Community Brag Posts
Ten dollar ledges
My very favourite thing to build, so cheap and simple.
Adirondack Chairs
![](/sites/default/files/70CC722E-E8B6-4CE4-86E8-E9DC65F54289.jpeg)
This was a fun and simple project. One of my first attempts at making outside furniture and it was nearly perfect the first time....why?... the plans were so easy to follow, the techniques used were not demanding, and the tool selection was ideal for my workshop. I put them outside and I have had good reviews, and requests, for these chairs.
Comments
outdoor sofa from reclaimed wood
![](/sites/default/files/3154827731_1370048031.jpg)
Using Ana's plan as a guide, I built two of these sofas to fit an outdoor cushion I already had. I used wood from our old deck -- a great way to re-use and save money, too!
![](/sites/default/files/3154827725_1370048031.jpg)
![](/sites/default/files/3154827726_1370048031.jpg)
![](/sites/default/files/3154827727_1370048031.jpg)
![](/sites/default/files/3154827732_1370048031.jpg)
Toddler bed
![](/sites/default/files/IMG_20170925_214044.jpg)
I made a loft bed for my 4-year-old son using Ana's Chelsea Loft plans. When I finished, I was able to build this toddler bed for my 1-year-old using almost entirely scraps left over from the loft (save for the 1x6 runners). I skipped the curved headboard design and went with a solid piece of 1x12. I was going to round the top edges or cut a more rounded design, but my wife said she liked the squared off look better (she has lots of ideas for painting various designs on it, apparently). Since we were going to use paint and not stain, I ripped some leftover MDF board for the 1x6 footers. The whole project took a single afternoon, including cutting, assembly, woodfill and sanding. The end result is pretty sturdy. My wife laid on it with both our small children and the slats hardly bowed at all.
![](/sites/default/files/IMG_20170925_214109.jpg)
Cedar Boxes made with Pallet Wood
Thanks for the plans, I was able to make this for a friend's birthday. I made it from pallet wood and it was so easy, I did a mitred top though because I wanted it to look neat and trim. .
I used pallet wood
Wood glue & screws I already had
Toddler Picnic Table
![](/sites/default/files/picnic%20table.jpg)
I was dying to try this little picnic table out for my boys. It was such a quick and easy build, though without clamps, I had to enlist my husband's help to hold things for me while I drilled!
Farm House Bench
First bench to match the Farm House table I have built. Istill need to finish my table now to match the bench.
For a big crowd
![](/sites/default/files/image_857.jpg)
My first project built on the garage floor. Before I had work benches :)
I used a borrowed mitre saw, borrowed jig saw and a $20 drill.
Comments
My version of the Simple Outdoor Dining Table
My version of the Simple Outdoor Dining Table
- All Cedar
Comments
AllGardenBenches.com Farmhouse Table
![](/sites/default/files/3154829326_1372257396.jpg)
Made this for my wife for our anniversary!
Check out a video of the project here: http://www.youtube.com/watch?v=3eyroIH517A
Check out more great furniture through All Garden Benches: http://www.AllGardenBenches.com
Thanks for the plans!!!
![](/sites/default/files/3154829325_1372257396.jpg)
Farmhouse Inspired Table
My husband and I used Ana's plans to create this BEAUTIFUL farmhouse inspired table for our dining room. The project was straightforward and we are EXTREMELY happy with the results. We added a touch of modern to the table by purchasing metal chairs from overstock.com. The table is perfect for family get togethers and even more important...family game nights!!
![](/sites/default/files/3154829470_1372425146.jpg)
![](/sites/default/files/3154829471_1372425146.jpg)
Comments
Mon, 07/01/2013 - 06:15
Wood
We used the "select" pine boards from Home Depot..which are a bit nicer than just the ordinary ones. To make the table top level we used a level to be sure that there weren't any major bumps...then once we had the top secured we sanded it to make the boards flush to each other. Hope that helps! Thanks for you comments!
Joss & Emit's Train Table :)
![](/sites/default/files/178-small.jpg)
This was my very first "Ana project"! It was a special Christmas treat for my boys and their expanding train collection. This table has had many, many hours of entertainment and enjoyment. It is a great beginner project and has very easy plans to follow! I didn't do the storage carts at the time. I may go back and do them later though...for now they like playing under the table as well. My obsession began :)
Loft bed for son
I've built a few bookshelves and cubbies before, but nothing on this scale. I built this in my basement this past December as a Christmas present for my three-year-old son. The plans were easy to follow. I believe I spent about $150 on lumber. The bed is very sturdy. My kids love it! Now the the other kids want their own special daddy-made bed :)
Comments
Reclaimed wood headboard, queen size
![](/sites/default/files/20180228_113338.jpg)
Made out of spruce to keep the cost under fifty dollars.
![](/sites/default/files/20180227_151514.jpg)
Wine Cabinet
![](/sites/default/files/FD360770-74EE-4973-8370-E10A5B98C50E.jpeg)
I took what was a single cabinet and doubled it.
![](/sites/default/files/45EED9DB-CB81-42B5-B304-19D88BB474AA.jpeg)
Our Flare!
![](/sites/default/files/IMG_20150928_110456.jpg)
Hi Anna, I really had fun making our version of your sliding mirror project! Thought you might enjoy the photos! I made it into a jewelry cabinet.
![](/sites/default/files/IMG_20150928_110524.jpg)
Comments
Sun, 09/17/2017 - 20:48
attaching rails
How did you attach rails? I still cannot figure out the best way to do it...
Reclaimed beauty
![](/sites/default/files/IMG_20151022_221756932_0.jpg)
I started the project on a Monday and moved the table into the house on Thursday afternoon. All wood used was reclaimed. I shortened the length of the table by 9 inches due to the length of the reclaimed boards. The dimensions are 87 x 38.5 x 30. I used a colonial maple stain brushed on then rubbed in with a cloth. Then I applied several coats of Polycrylic clear satin. The stain was $1.50 from the Habitat store and the poly was found in the house we recently moved into. I spent about $15 on wood screws.
![](/sites/default/files/IMG_20151022_221033002_0.jpg)
![](/sites/default/files/IMG_20151022_133531258_HDR.jpg)
![](/sites/default/files/IMG_20151019_180415519_0.jpg)
![](/sites/default/files/IMG_20151020_191556113.jpg)