Community Brag Posts

I built the cedar shim headboard and bed for my daughter and her husband a few months ago.  It turned out so beautiful that I decided to make bedside tables to match.  I used the basic pattern with some adjustments to accommodate using a 1x8 for the drawer instead of a 1x6 to give more room for the shims.  

The final tables turned out even more beautiful than I could have imagined.  Thank you Anna for the patterns and the inspiration to create such beautiful gifts.

This was my very first project to take on with Ana's plans. It took a little longer than I would have liked only because I got frustrated and put it to the side for a MONTH. I realized how important it was to pre-drill my holes and then got the motivation to get back to it. Once I got started again, it was finished in NO TIME! I still need to stain one of them, but I couldn't be happier with the result.

Came out very nice , thanks Ana this plan! I love it! 

Built from Ana's Adirondack chairs from book.

Loved creating this- I was worried that it wouldn't come out well and I wasn't prepared for the amount of time it took to pick out my supplies, but it's done and I love it! Thanks for the plans and for everyone's brag photos- I loved seeing that others had done it and hoped I could, too.

While my wife was away for the weekend, the boys (3 year old twins) decided to surprise her with a new coffee table! We had to get rid of the old IKEA one due to its sharp edges... we've already had one ER visit and nine stitches! A few notes/things I learned: * Pay attention to which side of the wood you leave facing out. A lot of my boards had one smoother side and I accidentally put those face-down. Meant a lot more sanding. * A belt sander would have made this a lot easier. * I took care to round all the exposed outer edges with the sander. A router would have been better for this, as it took a lot of care to make sure they were even. * It's going to get about three coats of polyurethane now, but I still would recommend coasters. This thing is HEAVY. It will probably outlast me. :)

I followed the plans but modified for a king size. I upholstered my bed in a linen colored upholstery fabric and added the nailhead trim to the headboard. This is the most sturdy bed I have ever owned. I don’t know if I will ever be able to buy from a store again!!

This project is closest to the Simple Closet Organizer, but I wanted to be able to re-use the existing components of the closet. The only purchased materials were one sheet of cabinet grade plywood and dowel rod holders (since I already had paint and screws).

I wanted to build this sectional such that it could be used with or without cushions. I modified the backs so that pillows and cushions would not fall through. Because I wanted to use redwood rather than the cheaper pine stock, I had to rip the lumber myself out of 2x4s. This process was a little tedious and required some minor modifications because the stock was slightly thinner than production lumber. However, this saved me money because each cut list resulted in two chairs rather than one. I also built the ottomans, side tables, and potting tables using ana-white plans. Because I dimensioned the lumber myself, this project took considerably longer than the estimate on the plans. This was a fun project that I will enjoy for many years to come.

Adaptation to fit my little mitre saw, small workshop and the metric timber available in B&Q. My first build, this should let me build more while staying comfortable and safe. I'm ridiculously pleased with myself!

It took longer to build than expected because my little boy thinks naps are for wimps.

In case anyone in the UK wants to build similar, here's my adapted sizes.

18mm plywood cutting list:

2   85cm x 50cm (sides)

3    50cm x 50cm (shelves)

2    50cm x 60cm (leaves)

2    45cm x 30cm (leaf supports - replaced fancy brackets that were too expensive over here)

Timber cuts:

6  34mm x 34mm @ 50cm (cleats)

6  18mm x 70mm @ 52cm (supports)

2  18mm x 70mm @ 42cm (spacers) 

Been a while since I had time to actually build anything worth posting about! My wife wanted some items for her Kindergarten classroom this year, so built several items, most inspired by the Farmhouse family.

When we finished our playroom I knew I needed to build the lap desk for their nail salon! It's the perfect size to do nails on and it holds all of their nail polish, files and cotton balls. I didn't add the trays on the side of the desk because we didn't have the space. I think I probably spent more time trying to figure out the hinges than I did building the desk!

I needed a microwave cart/table/stand, but couldn't find one at a price I was agreeable with. So naturally I started snooping on the internet. I originally found this plan, http://ana-white.com/2013/05/plans/2x4-craft-table and then modified it to fit my microwave and able to hide my garbage can underneath. I plan on finishing it with a ruffled skirt (to actually hide the can) and stenciling+staining the wood.

A few mods with beefier lumber.

I used the 6 Cubby plans and just started tweaking.  First was the plan to just do 12 cubbies, then decided to just put in adjustable shelves for aethetic purposes and not having it look too "Boxy"  After that decided it would look better with doors too.

as for the shelf on top, I used the cubby bookshelf plans and just made it wider to match the width of the doors and then decided to also make it adjustable shelving as well.  (used the kreg shelf pin system.)

Overall turned out pretty good. I am making a even bigger one for my other room.

I built this a a birthday gift for my sister. My dad brought me a stack of old fence boards and I used them for everything but the legs (4x4s) and cross pieces (2x2s). I hand planed the boards the assembled everything using Kreg jig, pocket screws and glue. The top I stained with a mix of minwax mahogany and walnut then waxed. The base was painted an off white and distressed. My sister loved it!