Community Brag Posts

Double wide trash can unit, Fall of 2015. 

Awesome front porch chairs. Added a back and tilted the seat back for more comfort!

I'd say all together i spent about 5 days working on this... but i did it all by myself and i'm a newbie! I used studs i found at home depot. My tulip legs were $8 dollars a pop and I bought a drill/kregjig and sanding paper because I've never built anything before. I hand sanded the whole thing!!!! This was my first build... but it did break once: For the center support i used two 2 1/2" screws and screwed it from the outside and the screws just ripped through the wood. but i replaced it.. put in new screws and attached little 1x2 pieces under both ends and i plan to adding 2 legs in the center. You an see in the photos i attached where the old screws were, and how i solved the problem under the bed by adding the like 1x2 pieces. I've had it for 2 weeks completed now.. and although the center support gave out once... it's been good and solid since! I hope this was help to anyone considering making this bed! P.S. just buy a sander... hand sanding is painful and boring!

This was my first project like this from website, the instructions were clear and easy to follow. I did this over a weekend all total it took 10 to 15 hours with the bulk of that going to priming and painting the wood.

The table is a little small (as is mentioned in the instructions). If I was going to make it again I might try 6 foot boards for the benches and top. I made a couple of modifications, one intentional and one unintentional. The intentional changes was bolting the frame together with carriage bolts. Others had mentioned that it was wobbly and I'm a bigger guy and didn't want to take a chance. The unintentional change is that it's an inch shorter than it should be. I was cutting the first pieces and thought it said 27 when it said 28. That wasn't a big deal as I shortened the other piece by an inch.

I'm very happy with how they turned out except that one of my benches isn't completely square. The top of the bench and table is square but somewhere in all my drilling and bolting together its off a little bit. I need to take it apart to determine where I am off and fix it.

I mentioned that it was $100 to build, it was $40 for the wood and $60 for all the other little stuff, screws, paint, primer, bolts, etc. Of course I have enough left from most of that to complete another bench or two if I just get the wood.

Thank you Ana!  the directions were right up my alley!  We have never built anything and now we cant wait to build our next piece!  we used your insturctions and made minor modications to accomodate our cushions.  We got brave and designed our own ottoman and put it on casters :-) We also added a few back support and legs.

We used one coat of deck over paint

Cushions were on sale at ballard http://www.ballarddesigns.com/ballard-basic-seat-and-back-cushion-set-w…

Quality of cushions is amazing!  they were the most expensive part.  We spent $600.00 on cushions.

Wood, putty, paint and screws about 350.

The chairs were a fun build we live on the coast , I thought what a great way to add some fun so I set up my C and C machine and made his and hers sharks chairs.

Queen- Hailey Platform Bed

This is my first build. I have always had metal loft beds and it's so nice to have something lower and not so noisy. Had to alter for a Queen- no problem.
My dad helped me out and now I know how to work all the tools pretty well. We used a countersink for all the screws instead of a kreg jig.
All that is left is to stain and I have not decided if I want a headboard yet. Definitely the first of many projects!!!

I love this bed in my son's room. They were wonderful plans that were easy to follow. The only change I made was to make the feet slightly taller so he could slide underbed storage containers underneath. My only mistake was not planning ahead for how I would attach the headboard to the frame. It ended up not being necessary because the weight of the bed pins it against the wall, but If I ever wanted to make this for someone else I would want to solve that piece first. 

Made from the Ana White. Deep seat cushions lounge chair plans with a few modifications. I used 2x6's for the legs and arms so I add cup holders and I added three horizontal back slats using pocket holes. Love the way they look!

I ended up combining two of the different plans (Benchwright, Tryde) because I wanted something that matched my Hyde Pottery Barn coffee table but that had drawers. My console table only needed to be 44" wide, so I ended up removing the middle 2x4 that was part of the Benchwright plan. I also used 1x2s for the bottom shelf because it was over a vent, and I knew that I was going to be using baskets for storage down there. I also used actual drawer slides because I knew that my console table would be used pretty frequently. The hardest part of the whole table was installing the drawers and making sure they were sliding smoothly and that the front of the drawers were flush with the front of the console table. Favorite part of the entire plan was the planket top...I love how it turned out!

This was my first project and couldn't be more pleased. Took about 20 hrs, and $120 including new materials (brushes, etc.) with borrowed tools. I filled cracks on top of table with wood putty and stained with Mission Oak; looks great, but make sure to dry wood putty with heater or hair dryer to avoid cracks if you go this route. Thanks Ana for the plans!

First piece of furinture I've tried to build, went surprisingly smooth. Raw table only took 5 hours to construct; an hour or two to sand; and then the waiting game after two coats of stain and 4 coats of poly. Used southern yellow pine for the top, dark walnut stain, and spar pro series semi-gloss poly.

Swiss coffee Entertainment Center... Distressed. All Trim work made by me.

I built this makeup vanity to fit a 40" wall. I was inspired by the design of the DIY breakfast bar. The hutch sits on the top and has plenty of storage. The front drawer fronts are hinged at the bottom, this storage space holds a hairdryer and iron or makeup with a cord pass through at the back. The stain is a mixture of three colours.

Farmhouse bed with 2 inch foam mattress and fitted sheet set with cathedral window quilt (blocks made half size)