Community Brag Posts

I really needed a kitchen island. That would work for me & last.
We, my husband & I, based our plan off of the Easy Kitchen Island Plans. I printed the plans. Then modified a few items. Originally I was gonna do a 4ftx25" but my butcher block we found was 6ft. So we left it with 6ft. My barstools slip under the overhang so kids can pull them out & use when needed but not be in the way.
We also made it custom to my height for mixing & kneading dough. The selves are different to work.with my tupperware containers. (Goal is to get all the same eventually).
We used cedar & a little pine for the main structure. The top is European walnut butcher block.
It's on wheels. So I can move it out of the way if needed.
We did seal the sides (kids & messy cook). The shelves & top I used butcher block oil & conditioner. Ever month I add a thin coat of conditioner to the top.
I love that I have so much room now to create.
Thank you so much for the inspiration!
Faith & Jonathan Flesher

It is almost back to school time (20 days) and I am home alone with my 4 kids while my husband is away on business for 2.5 weeks. What is a woman to do? Find a project.
There has always been this weird little nitch in the front "formal living room" that I use as my photo studio. It is only 55 1/4 " wide and 7" deep so nothing I could find would fit there- I usually have a coat rack there- and last year I had my boys' backpacks for school hung there. But... This year my twins are going off to school- which means 4 backpacks. Enter project! I modified the Small Locker Project (http://ana-white.com/2010/08/still-not-locker.html) and built the lockers to 1.) fit the space 2.)to fit their existing shoe baskets that used to be in an Ikea Expedit shelf.
I am soooo pleased with how they turned out.
I built this in pieces- first the bench, then the dividers and backing, and then the cubbies above. I built it using 1/2 in birch veneer plywood (that happens to be Purebond) from home depot. I had Home Depot cut the wood (which I normally do for the easiness factor- but this time it was a mistake. My favorite cutting guy was on vacation and I wanted to start now so I let Moose cut it. So not a good idea. One piece was 15" wide at one end and 15 1/4 " at the other... I gave him a cutting guide, hello?
Good thing I have my own table saw so I could fix it. (from when I built my girls beds: http://ana-white.com/2010/05/plans/corner-unit-twin-storage-bed)
I sanded and stained the wood with custom stain from Sherwin Williams. I then gave it 3 coats of waterbased Poly .(sanding between each one)
Then I glued and nailed it together (for the record, 1/2 plywood is harder to shoot nails into- just sayin')
Then I had the wood cut for the dividers and back (sand, stain, poly, glue and nail, install)
Finally the cubbies at the top: (sand stain, poly glue and nail, install)
After that I put on the trim so now I have a built in lockers for my kids- their backpacks and shoe baskets fit exactly, and there is room for when they grow for the backpack hooks to move up. I plan to use chalkboard vinyl to put their names above the hooks. Thanks Ana again for inspiring me!!!!!!

We were throwing all of our woodworking supplies into this closet off my patio, and it was really hard to find what we needed when we needed it.
So we made this shelf using two 2x4x10s cut to an inch less than 5ft each for the legs, and 4 1x3x8s cut to half inch less than 2ft each cut. (one board per shelf). (Measurements are for minimum waste)
Kreg jigged the 1x3s together 4 deep for each shelf. Used 1 1/4" Kreg screws.

We might go back and add a shelf or two to fix the odd spacing at the top and give us more shelves for the little things.

I liked the look of the spacers on the bottom shelf, but decided to leave them out since I just wanted to be done with this project :) I modified the plans to only have one shelf, as well as feet on the bottom (instead of having the piece go completely to the floor). As a result of adding the feet, the bottom is framed with 1x2s instead of 1x4s. I needed to purchase 6 1x2s to do that (but only needed 3 1x4s). I attempted to miter the cuts on those pieces...wood filler came to the rescue in the end. This was a lot of fun to make!

Super easy vase holder adds a fun element!

I used pine for the 2x6's and 2x4's (and 1x3's) and fir plywood for the headboard, footboard and drawers. I also modified the drawers and used a square piece of 3/4" plywood for the bottom - made it way easier to build the drawers square so they slide nicely!

The pulls are from Lee Valley.

This bench for 2 was made of leftover pine wood planks I had in my cellar. I used different saws and a router to make sure the ends where smooth and give the overall project a elegant touch. Since I love to see the texture of wood I chose a walnut stain.

I built this coat rack a couple of years ago for our house when our little girl ripped the one we had out of the wall trying to get her coat off the hook lol. I was actually able to reuse the hooks from the cheap little coat rack that we had bought from the home store. It attached into the wall using drywall anchors so it wasn’t all that secure to begin with. I set out to make one that would look a lot nicer and have some room for storage. The design I came up with works great for  storing all our coats and hats, but also the cubby storage at the top is great for storing keys and gloves and whatever else you may need to store.

This was my first woodworking project and I absolutely love it. I think it turned out amazing and was actually very simple to do. I just got some construction grade lumber from Home Depot and borrowed some tools and got started. I did have to buy a Kreg Jig, which is an amazing tool by the way. I am not complaining about having to buy it since I have used it on many projects since!

I built these modern storage benches for some friends of ours. They needed some space to store their little girls toys. They planned to use some wicker baskets they had. I took the measurements for the baskets and built the storage spaces around it. 

I took Patrick's design and expanded it. The dresser is deeper and has one more drawer than the original. The finish is only slightly distressed because that's how my 'client' wanted it. The drawer slides were the toughest part. The carcass MUST be square or at least very close. I built the whole thing, then tore the carcass apart and rebuilt it because my first attempt was not square enough. Obviously the drawers won't slide smoothly if it isn't square.

Edit: I get a lot of requests for the plans and/or cut list for my modifications. I do not feel comfortable re-posting the plans on my website and can not do it here either (only pictures can be uploaded). Please feel free to e-mail me (bbomerATgrvland.com) or request the plans in the comment section of my blog (linked below) and I will send you a .pdf that shows my modifications at each step.

Edit 2015-01-26:  I do not believe that I am getting notifications for all the comments here, so please use one of the methods above.

Edit 2015-01-28: I have posted my alterations here: http://grvland.com/wordpress/2015/01/28/dresser-plan/.  Please comment there with any questions, because I can not guarantee that I will get notified if you comment here.

This is a project I completed last summer. I made some revisions to the original plan. First off, I wanted a corner sofa, so I had to figure out how the corner would work. This was my first ever wood working project and I'm not an architect or engineer, so it was quite challenging. I made a mini model out of foam core to give me a visual of how it would all work together. That was a tremendous help and I recommend doing this to anyone just starting out.

I did not use the part of the plan that included the foot pedestal. Instead, I built the sofa flat on the ground and in the end added store bought feet mainly because I liked the looks of them.

The sofa was built exclusively with the Kreg Jig, except for attaching the horizontal back pieces. I could have use the jig for that part as well, but liked the rustic look that screwing them in to the back braces provided.

I didn't want a padded back because the sofa sits outside on a covered, screened in patio year round. I wanted the ability to take off and wash all the cushions, or to use the bench without the back cushions sometimes.

The 2 sections of the couch were built as independent units and are movable, so one can sit across from each other. Both sections have ample storage.

This was my first venture in building furniture. My granddaughter needed a new table and chair and insisted I could make it myself since I built her a playhouse (from a kit.) That's when I googled and found Ana White's amazing site and all the easy to follow plans.

I chose the Clara Table and Childrens Storage Chair. They reminded me of school - and my granddaughter who was 3 at the time loved playing school. Plus, since her parents plan to homeschool, I thought this would be a great starter setup.

I started with the chair. I did struggle with screwing it together, so it's not perfect. But it is sturdy; the storage box helped with stability too. After struggling with the chair, I decided to buy a kreg jig like Ana suggests - and boy did that make a difference! The table went together so fast and easily, I was literally in shock. And it's so strong I can sit on it. I'm sure if I had tried building it with just screwing the regular way, it would have been wobbly.

I bought a 24"x36" tabletop instead of using the 3 boards joined together and so had to adjust the measurements of the apron pieces accordingly. I thought it would make a smoother writing surface. I originally intended to paint it all white, but the grain on the top was so gorgeous, I decided to stain it - and I stained the chair seat to match.

This project was so much fun and came out so nice, I decided to build a toddler bed from Ana's plans. You can see that project here: Toddler Bed

This project was super easy and free! I just used some scrap wood I had, along with stains and finishes already on-hand and built this Pottery Barn Kids knockoff shelf while the baby napped! For the complete play-by-play, click my blog link!