Community Brag Posts

My most *favoritest* project ever. I modified the Braden plans like crazy to fit my family's needs for the sunroom/mudroom. I kept the bottom open so the it woould allow for baskets to slide it easily (which makes sweeping inside a snap). Also, I added some braces about midway down to hold the coat hooks for my 3 and 5 year-old. I had them show me how high they could reach and I just placed the braces there.

I literally used up whatever I could find in my garage for this project. We had a TON of scrap wood in varying thicknesses and lengths so I just used that. The only thing that I had to buy for this project was some 1x2 to finish off the trim.

Can't wait to get hardware on and style her up pretty! Will post final pics as soon as I do. :) I've been DYING to get something up on Ana's brag board and I can't wait to keep 'em coming.

Lesson learned....... Drilling straight holes is critical.

Super easy weekend project! 

I Decided to paint a feature wall in my kitchen! I’m really into geometric shapes right now and the next few projects I have planned will reflect this. 

I used some skinny tape to mark my lines and then put yellow frog tape on each side of the skinny tape and then removed the thin tape in the middle that was marking my straight line, this way my lines were all the same thickness and it was a really easy way to make sure I liked my line placement. I tried to make sure i had no two lines parallel with each other so that my pattern looked random and abstract. To limit the gold paint from bleeding and make certain my lines would be as crisp as possible I did a first coat with navy (same as wall color) over the taped lines- this kinda seals up the edges of the tape with the wall. Taping my lines was the most tedious part of this project but once they were on, it was as easy as waiting for coats of paint to dry. And I love the finished product! Really adds a POP to our kitchen! 

Check out the project on my Instagram, I will be posting some process photos and videos soon. @halfwayhandy

For this project, we combined plans from the Farmhouse table and also the Tryde coffee table. We have a smaller dining room so we had to modify the plans to fit our ideal size (44"wide x 62"long). I did not want the stretcher underneath as it would take up leg room and it is very sturdy without it. We used 2x12s for the tabletop & 2x8s for the breadboards. We used 4x4 posts for the legs and 2x4 for all the other support pieces. We constructed the table in 2 pieces: the frame and then the table top so it would easier to move into place then do the final assembly. This was our first time building furniture and first time using the Kreg Jig. I think the Kreg was easy to use and worth the investment. Overall, we were surprised at how well it turned out and will look to Ana for more plans in the future!

I have always loved benches at the dining table. They are so practical for cleaning, kids, and for cramming extra people at a table! We are (mostly) happy with our current table, but I was so sick of 6 clunky chairs floating around my kitchen, and these benches were the perfect solution. They were very simple to make and are exactly what I wanted!

I mixed my own color of stain for the top board from two Cabot colors (Golden Oak and Walnut) to create a color that break up all the oak in the room, while still fitting in. I painted the bases of the benches a creamy ivory for the same reason, to break up all the oak, and distressed the edges lightly.

I omitted the "x" feature in the plans because I was happy with the look of just the board along the bottom.

I painted mine black and distressed it. Stained the top and distressed parts with MinWax American Walnut poly stain. Hardware from Van Dykes Restores. Used piano spring loaded lid supports for lid.

This was a fun little project to make. The golf ball is trapped inside the 12 piece burr puzzle. As with all burr puzzles, there is a trick to solving it.

Build Instructions/Dimensions: https://www.instructables.com/id/Caged-Golf-Ball-Puzzle/

Video of Build: https://youtu.be/gcdd7ZAYNTo

Solution: https://youtu.be/IjHByz2_xMk

When I saw Ana's post within Young House Love's blog, I thought this would be great for pictures. We have a large wall that spans two stories in our entry way. This shelf helped make a dramatic impact when we have visitors over.

My husband made this table in less than a week. He said it was one of the easiest woodworking projects he's done in a while! We love it.

I pretty much just followed the plans.  It turned out a bit more colourful that I expected but I've already sold it so I guess its okay.  I'm going to make another one with a bit more toned down colours.  I also created a matching night stand.  I didn't follow any plan.  Just used the ideas from the bed build.

Farmhouse bed. Makes a pretty universal styled bed

My son loves his tower! We didn't attempt the curved sides, but made it work by adding a door with a toy steering wheel instead :)

Solid wood is an amazing material because it can be cut, re-shaped, extended, filled, sanded, stained, painted, and essentially re-used almost endlessly.

Last week, I took old cabinet doors (from when we gutted the mouse-hole kitchen cabinets that used to be in our apartment before we moved in) and turn them into a free cubby for my daughter's closet. :)

Clara table with chalkboard top.

Had some scraps hanging around and thought I would try using Ana's plan to organize the mess. Wow. What a difference. So nice to build something to fit your space rather than working around a preformed, plastic or metal utensil holder. Thank you Ana!

Utilizing the Hannah Canopy Bed plans, I made 2 changes that I am really glad I made. First, I added bead board to the headboard to give it a little style instead of the flat plywood. Second, I used 2x4's on all 4 corners because I could not find any 2x3's that were anywhere close to being straight. Overall I love the final project! It was nice, simple, and quick to get it all put together!

This project went pretty smooth. I built the sink box out of 1x6 and 1x8. Total cost (if I got the right stuff the first time) would have been about $120. Most of that is in the faucet (a $25 laundry faucet from Home Depot), pulls (about $4.50 each), knobs ($3 each), and hinges. I also purchased the wooden discs for the stove at Michael's for about $1 each. I used common pine and sanded it smooth before painting, which saved a lot of money over the more polished pine products. I used stainless steel spray paint for the fridge and stove door, and leftover paint for the rest of the sink and stove. I glued all joints and used my finish nailer rather than a Kreg Jig. I had a hard time finding hinges that will work, so keep that in mind. I ended up buying some of the European hinges that were surface mounted on the inside, and they work well. One suggestion - if you're planning on mounting these next to each other remember not to allow any overhang on the countertop. The plans call for a slight overhang, and I had to do some messy cuts after I had the cabinets assembled to correct that. I ended up attaching the cabinets together for added stability. Overall this was a surprisingly simple project. I'm considering building another cabinet like the sink/stove without any doors just for some countertop space and additional storage.