Community Brag Posts

Swiss coffee Entertainment Center... Distressed. All Trim work made by me.

I built this makeup vanity to fit a 40" wall. I was inspired by the design of the DIY breakfast bar. The hutch sits on the top and has plenty of storage. The front drawer fronts are hinged at the bottom, this storage space holds a hairdryer and iron or makeup with a cord pass through at the back. The stain is a mixture of three colours.

Farmhouse bed with 2 inch foam mattress and fitted sheet set with cathedral window quilt (blocks made half size)

Built this project for Mindy, our dog who needed a new crate. We used metal screen for the front door, and probably would use it fo the sides too for the future. Lessoned learned, be more accurate in cutting pieces! I also didnt find the door plans! So i had to wing it!

 Hi Ana & Hubby

 Completed the shelving unit this past summer in my Barn, great plan and really easy to put together,

Thank's for the plan and step by step instructions, Going to build another unit in the barn come spring time here in Upstate New York.  I made mine only eight feet wide by eight feet high givin the space I had 

it's eight feet between 4x4 upright polls. I went with a center 2x4 for added strength to avoid possible sagging from heavy weighted items I will be storing. I left room inderneath as you can see, I store my saw horses and my push mower under it well.  

Warmest Regards

 Steve

Second pic is a 6ft variation of your bench with a cooler installed in center. The other 3 pics are also from your plans, this is an 8ft bench with coffee table, end table and chair. not sure where I went wrong on the angle for chair but the length was correct however as you can see the back of the arm came up 1" short.

Fun to build

I used two of Ana's designs (the Potter's Bench and the Recycle/Garbage tilt out design) to make this outdoor bar. The containers can hold the beverage of your choice (I found metal ones and used ice to keep things cold). It was a big hit at the party and makes serving much easier. Thanks Ana! Keep up the good work.

I built this project by myself.  My husband helped move the large pieces when I connected them, so one person really can tackle this project!   I had a combination of scrap wood from new home construction on hand and store bought lumber.  Most of my time was spent sanding, sanding, and more sanding, especially with the construciton grade lumber.  Yes, it was worth it!   I used tongue and groove wood for  upper level flooring and bridge.  It really made it easier to put the floors together.  I connected all the tongue and groove pieces with a snug fit and used my brad nailer to secure it down on the perimeter of the floor.   Therefore, not every peice had to be screwed down.

Made this for my granddaughters! They love it!

I really wanted a built in unit for toy storage for our kids toy room but truth be told couldn't afford what I wanted ie pretty and solid. So while searching on refinishing furniture I came across this site. Thanks a bunch Ana. You've inspired me to create things I didn't think possible, all on a modest budget - diy. This was my first woodworking project. It was actually easy to me because it follows the same principles as sewing in which the depth of the wood is like the seam allowance. I really liked the 6 cubby plan but wanted it horizontal. I had to replan this piece as the plan dimensions changed when I changed the orientation of it. I also added crown moulding (but this was kind of a ledger style that rested ontop of the 1x2 - they use it as a door headers). I initially intended to paint this white but decided that it would have got lost in the white wood panelling. (DH even commented that i was taking way to long on this project but after seeing the finished results said it looked amazing.) So I painted it a grey blue, distressed the edges and then used a stain that I bought from benjamin moore's mis-tint section for $5.00 which says it's a danish walnut based but seems to have a slight purple huge to it. thanks again Ana, its because of you I don't have to stare at a messy toyroom any longer!

This project was built with a round top from a broken table and two 2x4’s. The top in this project is 30 inches in diameter. However, the designed can be scaled up or down based on your top diameter and/or desired table height. See drawing and video for build instructions.

Build Instructions:
http://www.instructables.com/id/Simple-Round-Table/

Video:
https://www.youtube.com/watch?v=CZGR2giAIv8

Drawing:
https://drive.google.com/file/d/0B21TbB8gGNQbeG96QVdsNGNKZHc/edit?usp=s…

Additional inspiration from here http://www.mylove2create.com/2015/07/farmhouse-storage-bed.html?m=1

Access to storage area under mattress via sliding doors at foot. Soft-close slides on all drawers and storage access. Modified plans for king mattress. Head and foot board attached using bolts and threaded inserts for easy disassembly. 

This is my favorite picnic table design. It seats 8 comfortably and everyone is sitting and facing each other for meals, drinks, and conversation. Also no one has to step over a seat to sit down so it works well for older family members.