Quick build desk
Modified from plan listed. Width is only 36 inches. Height in picture is 30 inches but I cut down before delivery to 25 inches. 25 inches is a better fit for elementary school kids. Top is 1/2 inch birch plywood.
Modified from plan listed. Width is only 36 inches. Height in picture is 30 inches but I cut down before delivery to 25 inches. 25 inches is a better fit for elementary school kids. Top is 1/2 inch birch plywood.
This is the first project my husband let me use the chop saw on.* I used some old 1x6's (3/4 in x 1 1/2 in) leftover from a chicken coop he built that had been on the floor and already had some nail holes in them - I figured that was was pretty close to pallet wood. He turned this from a beginner project into an intermediate because he made me measure and cut each side and end to custom fit the bottom of the box as as all my "pallet wood" boards were warped (does that make sense?) So make your life easier and use new boards! With his help it took about 25 minutes per box to cut and assemble. Putting a finish on was a little tricky because the wood just wasn't okay with some leftover iron acetate I had, so I just used Ana's black tea trick and they turned out perfect in about five minutes. My husband says this is an excellent first project for a beginner because a lot of furniture you build is simply A BOX, just bigger. We also built the laundry basket dressers the next day because I'd learned the concept of building a box! and I am having a great time learning to build. Really wish I'd taken wood shop in high school. Good thing my husband did.
* We built the laundry basket dressers and I dutifully assisted in the building of the Rustic X console table and I am so excited to post pictures, I just need to get some better ones!
Took about five hours to make and $25, looks very nice and have been asked to make more by others who have seen it.
Slightly modified bottom shelves to be heavy duty. Used salvaged 60yr old mahogany paneling for shelves surface.
It was fun to build this and i took my time over several weekends. Not being in a hurry probably helped me figure stuff out before actually doing things. I will probably remake the door as these are thick and probably to heavy. We will probably end up doing something decorative with the doors once we decide if we are making new ones or not.
Made from re-purposed fencing slats, shims & copper tubing . The handle doubles as the bottle opener. I like that the piece will improve over time as the handle oxidizes. The Holiday Spirit now comes in packs of six.
More at:
www.facebook.com/chuckedwood
This was my first woodworking project! Thank you Ana for the easy to follow plans. Making this end table has given me the confidence for my next project - bathroom vanity unit, which is almost completed.
Wed, 09/10/2014 - 14:12
Congrats on an awesome build! You did an absolutely beautiful job! LOVE the finishes you used! :) JoanneS
Slightly modified version replacing the "X" with a Truss design on the ends. The table top uses a 2x8 in the center and 2x6 boards for the rest. This is because when you rip the edges off the 2x6's for a nice gap free table top the total width of the top is too small so the 2x8 in the center re-gains the lost width. Finished with Minwax Expresso and Spar Urethane Ultimate!
My mom, dad, husband, and I built this farmhouse table over the course of a couple weeks. The top was barnwood pine and the base was pine lumber. This was my first build and I'm hooked!
Not going to lie, as this was mine and my husband's first time building we did run across a few challenges BUT, nothing that we weren't able to figure out and correct. It came together beautifully and I can't wait til we purchase our first home in January so that I can figure out what color to stain it!
FYI- the angles were difficult to get perfect especially since we were using a makeshift work bench (ie: a pallet and the sidewalk) and a circular saw - we were also rather unfamiliar with some of the terminology used in the directions
About 2 years ago when we were redoing our kitchen, I made these ledge shelves inspired by Ana White's $10 Ledges. I originally wanted to use them as storage for spices and our olive oil, but once our vent hood was installed, there just wasn't room for them, at least not as I had originally intended. Since mine are made of yellow pine (harder wood) and I used a 1 x 6 for my platform instead of a 1 x 4, my ledges cost more than $10.
I built the original cabin bed for my son when the plans first came out and it has been such a huge hit. After seeing the loft version on RH, I decided to modify the original plans in an effort to give my son more floor play space in his room. The loft bed was his Christmas gift and I've never seen him more excited (he's four). Both he and his brother spend hours a day playing in the bed and underneath. It's hands down the most satisfying project I've built.
Mon, 06/24/2019 - 10:00
Hi!
I am so sorry I didn't see this sooner! I added the modified plans to the "blog link" section above. The modifications I made are in red. Feel free to email me if you have questions. I don't seem to get notified of comments on here.
Fri, 06/22/2018 - 17:50
This is absolutely stunning!!! I want to build the same one for my kids' rooms! Did I mention I love the colors as well? You did such a great job! Did you have to add anything for additional support since it's lifted higher than the original plan? Anything else I should be aware of or anything you can share if I were to build this bed? Thank you so much!
Mon, 06/24/2019 - 10:07
Thank you! I'm so sorry for the delayed response. I don't seem to receive notifications of comments on here. No, I did not have to add any additional supports. It is really sturdy. The build itself is very similar to the original, I just adjusted the height of the bed, and changed the dimensions of the upper cabin to leave more space on the bottom for play or another mattress. Hope that helps some. The plans are linked above in the "blog link" section if you're still interested.
Fri, 06/22/2018 - 17:56
Is your room 8' or 9' ceiling. Would you mind sharing your dimensions?
Mon, 06/24/2019 - 10:11
We have 8' ceilings. If you're still interested in the plans, I linked them above in the "blog link" section. Sorry for the seriously delayed response. I apparently need to check my notification settings. Feel free to email me if you have any questions. [email protected]
Due to COVID-19 the first 9 weeks of my children's schooling will be online. When I looked for cheap desks in my area they were completely sold out. I have been a big fan of Ana White's designs since I first discovered her through Pinterest. This was my first furniture build project and while it's not perfect I will definitely be attempting another. I modified the height of the desks to fit my 1st and 5th graders. I also decided to add a second bookcase for extra support and storage. My husband owns a flooring store and he had custom quartz desktops made instead of using wood. We temporarily glued the desktops on versus a more permanent install. This is so when the kids go back to school full time and the desks are no longer needed in our dining room we can remove the bookshelves, finish the tops off in another way and move the bookshelves to their bedrooms! I may still add cork-board to the front section of each desk but I am undecided at the moment.
The standard play kitchen. The pine planks used were not a consistent 12 inches. I would recommend using plywood. Finished with hardware from IKEA ( blue handles) and lowes (flowers and hinges).
We've built a headboard, two nightstands a farmhouse table and bench all off of knockoff wood and this workbench console table and hutch was the Easiest build yet !
We didn't use pocket holes so instead of doing the middle center shelf of the hutch we chose to keep it open. I actually love the way this looks better than the original plan!
Waiting on our black bear mount bottle opener that will be attached later this week and then we can't wait to stock up our new bar. It looks great next to our farmhouse table and bench!!! Thanks for the deer antler inspiration - this gave the perfect finishing touch!
4'x4' Coffee Table
Por ser principiante me tomo 2 fines semanas.
Ana, I borrowed the structure of your hexagon picnic table and created a coffee table to compliment my collection of Adirondack chairs on our patio. The rib structure using 30 degree angles is surperb, and with pocket screws on the joints plus Gorilla Glue, it is far stronger than I anticipated.
The table is first shown unpainted, then again on the patio in poor light (sorry for that.) I primed and then painted it brick red and am in the process of updating the paint on all of the chairs to match.
The 30 degree angles are probably the trickiest part. If your saw is off by even a tiny bit, the tolerance buildup will come back to bite you. For example, if each cut is off by 1/2 a degree, you have six cuts, which equals 3 degrees of error. My mistake was not calibrating the cuts made on my table saw or mitre saw. A professional woodworker buddy of mine suggested buying a cross-cut sled for my table saw. That's my next purchase.
Overall I am very happy with the final outcome despite the slight imperfections in the spacing between the slats. A little wood filler covers a multitude of sins!
Wed, 05/15/2013 - 16:21
Really like this table. Besides a coffee table I think it would make a great picnic table for the little kids, where they could pull up their small chairs and I also think I might try building this out and up a little and use it as an addition table for dining on the deck. Now I just have to decide what kind of chairs to build to go with it. Thanks for all the additional ideas.
Tue, 05/21/2013 - 03:19
The best way to use folders for advertising is to modify them. They are rather simple to be modified and they have many variety to meet a variety of needs in style. Wholesale Pocket Folders Printing
This was my second ever project. I think this will become a long time hobby.
2 years ago I mad a TV stand that was nice. I decided to make a new one now that I know more about wood work. First one was made from Lowes top choice oak plywood and took a lot of work. I have discovered real hardwood stores and for plywood I like Baltic Birch.
I didn't make any hard plans for this one, made it by ear. 2 sheets of 5x5 18mm (3/4) 1/2 sheet of 12mm (1/2) and a 1/2 sheet of 6mm (1/4) Baltic. For edging I left the baltic alone and just rounded it over.
60'wx20"dx 28h
Build for niece. Easily converts to left or right handed desk. I'm a lefty and initially built to suit for me....then moved the footboard from back to front and turned that baby around....none the wiser lol