Community Brag Posts

I loved the look of the Craft room Storage tower but modified to suit my wife's bathroom theme/decor. The inside back (MDF beadboard) is painted a milk coffee color to lighten it up. The door inserts are plexiglass, which was more expensive than glass but with 2 boys 6 and 2 it is well spent, and the MDF beadboard. Covered the plexiglass with self-adhesive film for glass on both sides to hide the towels inside. This project took me about 12 hours to complete but over a 3 month period, mostly spent on finishing the project with my boys underfoot or at 12-2am. YIKES!!! If i keep this up she will want to buy instead of letting me build.
Price List:
wood: $100
Stain/Paint: left over from house reno. would have been $15 stain $20 Varnish 30$ quart of paint
Handle: $7
Hinges: $4 basic style
I wanted to use Eurostyle hinges but opted to buy the Kreg system instead of Forstner drill bits.

Will be building another just different dimensions for laundry room makeover.

Used the Rustic X Coffee Table plans for this project. I altered it slightly to add the bread boards on the end. I also used my jointer to create a more flush joint between boards. When I went to cut the "x"'s out of 2x2's the boards ended up being too short. I'm working on a similar piece for a family member and I am waiting to cut these pieces until I'm almost finished to save stock. I also used a chain, hammer, nails, and metal clamp to beat the table top to "age" the wood a bit. 

This project doesn't take long to build. Finishing takes about a week. 

Took an old whiskey barrel, secured the staves before cutting in half. Built a frame around the top. Built the lid out of old cedar picket fencing and cut the legs out of old Barnwood. Sprayed the inside with Flex Seal to make it waterproof. And used an old used Horse Shoe for the handle. Stained in 4 different shades and clear coated the whole table. 

we built this table for our new home when we couldn't find an existing table that we wanted for under $1000. we were hesitant to attempt building it ourselves since we haven't attempted anything similar before, but knew we could do it with a plan. there were a couple bumps in the road as we learned how to read the plan and understand the different techniques, but we LOVE the end result. Especially because it didn't cost us anything out of pocket! {we had a lowes giftcard:)} the total came to about $130 for all the supplies; including the paint and poly for the finishing.

read more about the process on my blog: http://www.carissamiss.com/2012/11/house-projects-completed.html

I used all distressed or reused wood. While I followed plans from Ana’s posting I used reused or distressed wood, cutting the wood to the plans specifications.   Cutting the wood I also considered the nominal size of lumber and the size requested in the plans.  Even with the unit sanded and pained the I like the character that has come through.

Big thanks to Ana for the plans and the rest of the community for ideas! This was my first major project, and I'm very happy with the way it turned out. This bed was based on the King Farmhouse plan. I wanted a look that was a little less rustic than the classic farmhouse style, so I substituted the boards for oak plywood and framed it out with some pine boards and cove molding.  The pine boards are 1x3s.  I topped the headboard and footboard with a 2x4 and then a 2x6 overhanging the 2x4 evenly on three sides (it's flush in the back).

The posts are 4x4 cedar.  I used lag bolts and glue to attach the posts and concealed the large holes with wood plugs cut from scrap sections of the 4x4.  

I wanted to be able to break the bed down, so I used Rockler no-mortise bed fittings to connect the side rails to the headboard and foot board.  I highly recommend these fasteners.  They are easy to use and seem very solid. I framed out the bed with 2x4s that I connected directly to the side rails with pocket hole joinery.  (First time using the Kreg jig - love it!!).

Thanks again!!

I really want to build the farm house storage bed. But I also need end tables right now. So I made these to go with the bed I hope to make soon! Its 17"x17"x27" high. I used cheap draw slides I got at lowes for under $5.00. The legs are 2x2 that were ripped from 2x4's. The rest is pine boards.

My husband built this farmhouse table for me for our anniversary. This was his first build and is so proud of his work. He completed it in time for us to host Thanksgiving for some soldiers in his unit. The table sits 8 comfortably and doubles as a ping pong table with my kids. 

Mid size adirondack chair made after the Disney Cars character Ramone.

We found two old windows with the original hardware. They were covered with chipping lead based paint so we pulled off what paint we could (safely). We then painted them over with oil based Kilz before the final coat. We then built the cupboard from there. We decided to go with a more rustic look since the windows were still a little rough. We applied a crackle finish in a few spots using white glue to add to the rustic texture.

This was our very first building project and we are thrilled with how it turned out!

I changed up the dimensions a little bit... I wanted the table to be shorter and wider. I ended up using three 2x10s and two 2x8 for the table top to make it wider, and then just changed the cut list to make the table 76" long instead of 85". 

We did our best with picking out the straightest pieces of lumber from Fleet Farm, but even then had trouble getting the boards flush and flat to make the table top. I laid on the boards while my husband screwed them together, but even then had to spend hours sanding the top so that it was as flat as possible. 

I did a couple coats of stain, which turned out really nice on the top of the table, but for some reason the legs turned a funny color. Some of the knots are a strange shade of purple. 

The polyurethane is amazing stuff. I had to control myself from putting on a million coats. Beware- that stuff sticks to everything and does not come off. (Olive oil helps get it out of hair ;)...)

Anyways, I love this table and so do all of our visitors! We can comfortable fit 8 people at the table (squishy with 10 people) even with change in table dimensions. Great for hosting Thanksgiving!

Modifications:

Rounded ends of feet with table saw. 

Used 60" round tabletop, cut from a plank tabletop made of 2x6s.

Also ripped 1" off the X-supports to reduce thickness. 

Working off of Ana's easy and classicly styled nesting table plan, we decided to go with a stain finish to match the furniture in our formal living room. Building the tables was quite easy and fast. The time was in the waiting for the stain to dry and be ready to apply multiple coats as needed. Staining obviously takes much longer to complete, but well worth the wait.

Easy project . Two year old is going to love it.

Built this using the Anna White's "MIMI'S FAUX MANTLE" but instead of using crown molding I elected to use STONE TILES in a neutral tones and finished the surround and mantle in white giving the piece a nice soft appeal.  The building plans were easy to follow and took about 2 days to complete the whole process (because of drying times) not to mention how reasonable the cost was.  I already had the tiles,  adhesive, and paint from left over projects.

Tv Stand for My mother for Christmas. Couldn't find untreated 4x4s so i used cedar. Found now after the project was done that Menards has untreated 4x4's, even Red Oak.