Community Brag Posts

Tryde Console Table. First project undertaken. Decided to make a bottom shelf. Used 4 1x4s and notched the middle two to fit around legs. Being that is was out first project, we had a few problems with keeping everything square and level but with a few minor tweeks it ended up looking really good.

We are a foster family which means we have a large family. The Mrs. wanted a large table to fit 8-10 people, so off to ana-white.com i went.
Plans were perfect! Made one long 96" bench and two 42" benches from the same plans. I changed it up a bit by adding a perpendicular plank on the ends and trimmed it with 1x2's for look and strength. 2 coats of stain and 2 coats of polyurethane. Just in time for the holidays! Thank you again for the plans, this is the third thing I have built.

This was a lot of work and a bit of frustration but now that it's done it was well worth it!!

We followed Ana's plans but went 1 ft taller on the pony walls to increase the height. We are so impressed with how it turned out. I'm excited to grow plants in Northwestern Ontario.

This is my first DIY furniture project inspired by Martha Inspired Craft Space Table posted by Ry. I built it for my combination of console table and craft space. I will be using the shelves in the middle to put my wicker baskets(that is why it was not nicely stained:-)) for quicker access of some of my craft stuff. Thanks for the plan!

I had always wanted a kitchen island and saw this project. Seeing that the plans were well written I decided to tackle it. In addition I made a few small modifications to enhance the style of the island. These included using 4x4's on the corners and a IKEA butcher block top. The top allows for a larger surface area to work with and more space to sit under. The stools in the picture are from World Market and they were the perfect pair for the island. The island is great for family gatherings or just sitting with your morning coffee. I had family over for Thanksgiving and received lots of compliments. Thank you Ana!

I loved the simple look and have admired similar loungers at Pottery Barn.  Even if I had the money I feel it's a waste to pay for what they charge.  I knew there were plans somewhere to make something similar for a fraction of the cost.  So happy I found this site!

I have many tools at home so I needed to purchase the lumber, hardware (screws, hinges, etc.), stain, and sealer.  I would say it was about roughly $100/chair (rounding up) - not including the cushions.  Those I found at Lowe's for about $60/each.  

I haven't made anything like this before so I made the first one and took my time.  I really enjoyed the process and thought the instructions were simple to follow.  I have some skills and basic knowledge so I didn't feel like this was too difficult.  I love the way they turned out!  I did the 2nd chair the following Saturday.  It took most of the day including the finishing.  I only took a few hours to put one together.  If I had help, would have been less, no doubt.  I plan to make a double lounger to match these soon. 

I will agree with some of the other posts that the legs seem a little "flimsy."  I went ahead with the orginal plan and they've held up with no problem for a year in the Texas summer heat with lots of activity and use - including our dogs!  So, I guess it's just fine.  I may use something sturdier for the double lounger since it would hold more weight.

I highly recommend these loungers to cut costs!  Also, the plan is not too difficult for anyone with little experience.

Hi I was tired to see the magpies and flickers destroying the nest and kill the sparrows After days of research i came up with this model that i tested last summer and believe me, it was successfully accepted by sparrows This year i made bunch of them, some different models till i get to the yellow one style that is perfect I really loved it and i'm here sharing it with you guys I will share plan for this bird house in my Instagram next week (June 12)

I designed this off of the laundry basket holder.

This is a mix the "Side-Street bunkbed" plan and the "How to Build a Loft Bed." I used "Spax" 3 inch wood screws to attach the side rails instead of bolts used in Side Street plan.  I used KregJig pocket holes for everything else. 

Lots of fun building all of this - very easy to do as well. Built a coffee table, 2 end tables, 2 console tables, and the book case. I changed a couple things up like doing 1x4 instead of 2x6 for the tops, and used the advice on aging/oxidizing the boards as well.

This was a particularly fun build for me since it was for my little guys' room! Hope Santa fills it with tech goodies on Christmas!! Please check out the details on my website! Happy Holidays!!! :D

After contacting two cabinetry carpenters to do this project for me,  I came upon Ana's plan for the Momplex. I made some adjustments for my home abd surprised myself. 

My motto "what's the worse that can happen? I have to call someone! "