Community Brag Posts

I was very excited to make this for my daughter. I made the tops and shelves from MDF. Unfortunately, I made the mistake of buying construction-grade 2 x 2s, instead of select pine, as I didn't know there was a difference at the time. DON'T do this! The select pine looks much better, with crisper edges and cleaner lines.
The assembly was a bit tricky on my own, but I managed to get it done. I really like the general looks of this desk, but I made a few mistakes along the way so I'm probably going to build another, without the mistakes.

This was our first build and it turned out great!  My daughter loves all of the storage under the bed! 

My biggest woodworking project yet. I used espresso gloss stain and polyurethane finish.

These were made for a charity auction and ended up selling for much more then I expected.
I was suprised and how strong the chairs ended up being. I'm thinking of making another table chair set only with 4 chairs and a longer table.

My wife wanted a black headboard to match our existing bedroom set so I built just the headboard from the farmhouse bed plans. It was simple to build, looks great, and my wife and I love sleeping under it.

This was a fun build.  I used common board for the the stripes and a left over piece of cabnet grade plywood for the union.  Whole thing is 37 x 19.5.  The stripes are 1.5 wide.  I painted all the pieces then sanded then down to expose the grain and give it a worn look.  Then I took a handheld propane torch to it.  I used small 1 in tin stars which were the most challenging and expensive part of it. I painted them then distressed them with sandpaper.  I attached the stars with super glue.  All in all a fun project.

Here are a couple my Grandson and I built with pressure treated lumber with PVC handles and Azek seats. Grand kids love them!

A friend contacted me about building a custom sized desk to coordinate with a set of dressers that she purchased used (I refinished them years before). We started with the Simple Modern desk (more in overall look), but made some changes away from "Modern" such as the bases, overhanging and routed top and trim on the side aprons. The legs of the desk aren't solid 4x4, but1x4s and 1x3 furring strips kreg jig'd and sanded till nearly seamless. The support under the desktop was redesigned to create a large, single drawer faced as two. The top is made from pine boards edge joined together. The two "bases" combined, have 96 pieces of trim to create this look. It was alot of work to get some tiny pieces just right, but well worth it in the end.

There are two comparison pictures uploaded. the photoshopped photo is the inspirational photo that came with the "Can you build me one of these?" and the second is the side by side with one of the dressers I was asked to compliment.

At 4 ft by 2 ft, she says its the perfect size for her home office laptop.

Overall, I was pretty surprised about how different of a turn this desk could take in style as I went from bare to adding the trim. Perhaps it can inspire others as well.

Similar to a previous poster, I was inspired to build this project to use as a combo dresser/changing table for our first child's nursery. It took quite a few days worth of work (spread out over a couple of months altogether) but I finally finished the bulk of the work a few days before entering the third trimester of pregnancy, phew! I think we'll enjoy this piece for years to come, thanks Shane and Ana for the plans! (Please excuse the poor lighting and ugly garage, we haven't set up the nursery yet so the dresser may be living in the garage until we do!)

Rustic Farmhouse Table with pocketholes and Special Walnut Finish

Make sure your wood is straight withno warping!

Made this for my daughters new house! Love how it turned out!!

I'm a father of 4 girls ages 6,5,4, and 1. So a regular bunk wasn't enough so I decided to add the 3rd bunk. Each painted in my girls favorite colors. The paint was Martha Stewart signature paint which was on clearance on Lowes. Think it was 3 or 4 dollars a quart. The cubby steps are basically just 4 boxes stacked on top of each other and nailed together and made from 3/4" furniture grade plywood.

It didn't come out perfect but I'm pretty happy with the results. Let me know what you guys think. Thanks.

PS, Ana...my wife is a big fan of yours. She's the one who turned me onto your site.

Had an old concert poster that I had been looking to frame. Glad I found these plans.

Modified top boards, 3/4 inch galvanized pipe as center support to reduce cuts needed, and casters so the massive thing can be moved.

This is inspired by mud room bench with drawer. Apparently I had to make quite some modifications as this is for a bay window bench with trapezoid shape instead of a rectangular. In the middle are 2 drawers, at both ends are corner cabinets. Ana's design worked beautifully as the foundation of my project.

We used cedar for these nice, little chairs and based the table on the chair model, only 24" tall, rather than the 18" of the chair seats. It took longer to cut than assemble these - total time: @4 hours for all.

Thank you, Ana!

Darin

An easy build! Thanks for the plans, Ana. This was a housewarming gift for some friends and it now sits nicely by their pool. I got the cushions from Ikea (Arholma range) and sized the sofa around them. I used 2x3s for the frame and added a couple of 2x3 support legs under the back cleat for extra support. I also attached a couple of 2x3 pieces between the back cleat and the back apron for the back support to rest on. Now for the table... :)

This was by Far The Best Sectional plans on the Net! Very Easy To Make! Thanks Anna white