Community Brag Posts

Ana, 

My wife saw this and wanted one to match her benchwright coffee table. I decided to make her one and used rough cut pine to get that look. Just used 80 grit to knock off the roughness but not enough to sand into the saw marks and was pleased with how good the results came out. I don't like exposed fasteners so all the joints are pocket hole screwed and glued and the table top is biscuit jointed and the end piece is doweled into the long runners. Love your website and the other projects that you have shown here. Keep up the great work!

Josie

I made these for my new niece-  Here's my story with recipe for a homemade sealer as the dye runs on drooly faces.

http://onblissstreet.blogspot.com/2014/10/sweet-baby-p.html

I loved Ana's 4x4 Truss Beam Table which was my inspiration for building this outdoor patio table Yesterday, I had a lot of fun. I used brown pressure treate wood because I wanted a table for my patio which would be weather resitant, a strong, great looking table that goes well with the rest of my patio anf I bet it wil last for a long time... Ready to entertain family and friends as soos as Spring comes!

Tryde coffee table for the living room

Built this table for our dining room and made it larger than the plans to fit 10 people around it.

I found this on the Pottery Barn site for $ 3,000.  We wanted to make it for my grandson who had a lot of health issues.  We thought he would really enjoy it.  We made it around a full size bed & I really think it looks just like P.B's. !!!

We have a pretty small place and not a lot of room for our sewing/crafting stuff. We would leave our machines by our piano, on the floor, every time we brought them down stairs. We needed a better way to store them and this was the perfect solution, and it added a few more seats in our little family room. I build the bench with a one-piece top and added a removable tray for the cords.

Maked for weekend:)

This was a fun weekend project!

Joy Marquee from Home Depot builders' workshop.

I wanted to build a desk for each of my 3 kids. We have an unused loft space in our home that I wanted to convert to a kid's homework area. Initially, I was going to build cabinets and create two walls of built in bookshelves and desk space. But decided I wanted free standing desks in a style that would last them into adulthood. (And possibly move with them into their own homes:) I really liked Pottery Barn's Printer's Keyhole Desk for the first desk but couldn't find a plan to build something like that. I ended up modifying the Turned Leg media console plan instead. It was a lot of work trying to figure out the correct changes to the plan. It totally made me appreciate how easy Ana's plans are to follow. I changed the depth to 24 inches and also changed the basic box from the plan into 3 boxes (left side drawers, middle drawer, right side drawer) then attached the boxes to each other then to the top. It was a heck of lot easier to say that in a couple of sentances then to actually do it. I also found it easier to put face frames on my drawers to hide my not perfect drawer boxes.

This project took me about a month to complete. I am a SAHM, and was not able to work on it every day.

The finish is Minwax Ebony oil based stain. I've had success using Annie Sloan waxes on other projects but was not happy with how the top looked after using it on the desk. Eventually I sanded the finish off and re-stained it 2x then topped it with 3 coats of Polycrylic. I left the rest of the desk with the original stain/Dark Wax finish.

I am too lazy to attempt sanding off the rest of the desk and restaining and sealing it. Kid #2 is already asking when I'm going to start on his desk (I'm thinking RH St. James style) and Kid #1 came home from school today and wanted to do his homework in the basement (where his desk is currently drying) so I think I should just say it's done and move on!

My experience comes just from reading this site and a few others. I've made AG doll furniture, picture frames, a console table, 2 benches, built-in bookshelves and a dollhouse bookcase. I used pocket hole joinery, glue and nails in this project. I don't have a table saw, so I made my long cuts with a circular saw fitted with a Kreg Rip Cut and occasionally a jig saw.

I would like to add some sort of hutch to it and am considering the Channing Hutch from this site. Thanks for reading!

This was built using redwood 2x6 planks trimmed on the edges to square them off and get them to 5" each. I used kiln dried redwood 4x4's as well. The redwood was a bit more pricey BUT it is far lighter than pine and the boards and grain are of a higher quality. The planks were put together with 6 dowels on either side along with glue and big cabinet clamps. The top was also attached to the base with a dowel every 12". I sanded to expose/raise the grain on purpose and give it a hand scraped look. I went two tone on the piece to match my dining set I did. The top is Jacobean and the bottom is Annie Sloan old white chalk paint. The piece is designed to getter better with age ;)

Recycled Pallot crib (extremely heavy)

I enjoyed making this chair. Even though I am a beginner at wood work, it really was easy to make and the instructions were very clear. I made it for my daughter. She will be 3 years old in May and she loves it. Our next project is making her a table to go with the chair. Thanx for sharing the plan

This project was similar to the Rustic X Console.  Recommend building the lower shelf halves before installing so that it's easier to make the bottom flush.  The X's were somewhat tricky....just take your time.  It's easier to cut the piece too big and trim than to add wood to a piece too short.  I stained the top with miniwax special walnut and used a satin poly.  For the bottom, I used the same stain and then painted over it with rustoleum heirloom white.  I lightly distressed it with 150 grit sandpaper so some of the stain would show through.  All in all I am very happy with it!