Community Brag Posts

Built this mostly out of scraps I had in my garage. I had to get a few pieces but it was an easy build. I left out the x but I will probably be adding it soon and putting it out on my front porch once it warms up. For now it's filling a big empty wall in my living room!

This was a super fun and easy project to do! Everyone LOVES this sign and wants to make one for themselves. Great cheap and easy wall art!

This is a pretty challenging little puzzle that is relatively easy to make.

There are three puzzles to be solved.

• Puzzle 1 - Arrange the cubes inside the enclosure so there are 4 different colors in each side.
• Puzzle 2 - Pull the cubes out the enclosure and form a 2x2 square out of the cubes. For this puzzle, you must have 4 different colors on the top and bottom, and 2 different colors in each side.
• Puzzle 3 - Again, this one is outside of the enclosure and makes a 2x2 grid. For this puzzle, you must have 4 different colors on the top and bottom, and same color on each side.

Note that you will also find this puzzle under the names, Four Cube Puzzle and Stop or Traffic Light Puzzle.

See Link for Build Instructions: https://www.instructables.com/id/Instant-Insanity-Puzzle/

I saw this plan a couple of months ago, and knew right away that this is what we need for our kids - their old table was always filled with papers, crayons and they never had enough space to store whatever they did.

I made the table longer so that it would be enough for both of them, and added foldable legs to support the table top.
Since I didn't find the right hinges for the legs, I used a piece of 1x1 with wood dowels which are attached to the inner side of the legs when unfolded.

Had someone ask me for this side table but in a smaller size. I subtracted a board from the top and adjusted the width to 22 inches. I also used 2x3's for the legs because the 2x4's mad the shelf look too cramped in the sketches I did.

Adjustable sawhorses for outfeed of tablesaw and temporary workspace counter

My family and I really enjoyed camping last year and with the addition of another child we will not be able to get out this season. So, I modified the simple bench plan to create a comfortable seating area while we "camp" in the backyard. With the money I saved building vs. buying, I was able to purchase a new miter saw and sander and still save a ton of green. I plan on building a couple side tables to complete the set. Thanks for the site Ana, it helps make our home more warm and affordable.

Well worth the time and effort!!!

I built this new workbench for my garage to accomodate my table and miter saw and to add some stowaway storage and I cant tell you how much I love it, especially with being able to pull the tables out to make an outfeed for the tablesaw. I altered theplans a bit to shorten the entire length by nearly 1.5 feet and instead of the board mounted tool space I added my bench vise to this gap and use shelved underneath for storage. The plan was simple to follow and allowed me to build a bench that all of my neighbors talk about now! Thanks so much Ana!

My wife asked me to build her a sewing table so I modified the x console a bit. Pretty happy with the result. Still need to add the hardware to complete the piece. Finished with the vinegar / steel wool solution after pre treating it with black tea. First time using that technique and will definitely use it again.

Using the Junior Height Camp Loft Bed plans...

I raised the height from 65 to 67 inches to better accomodate a bottom bunk.  Added bottom rails and extra 2X4s for the head board.  

I shortened the width and length of the stairs to better fit in the room, and in doing so, made a small mod to the post by the stairs to prevent the boys from falling down the stairs.

Kids Love them

Fun build. Will be making more.

This was a recycle from a window replacement project on my 108 year old home. I removed the leaded glas window from the top of a 4.5 by 4.5 street facing window with a reciprocationg saw, attached a 1x4 pine board with trim screws on the ends and trim nails on the mid-portions. Painted it with satin black with a sweep of gold and pewter for a little dramatic effect, purchased a heavy weight mirror hanging plate and attached to the wall and window back. I'm thinking of backing it with a mirror to improve looks,

Ana's instructions were very easy to follow. The main problem I had was the 4X4 lumber was S4S, therefore the edges were rounded, which made for awkward joints with the aprons. Other than that, I used wood conditioner before staining and sealing.