Community Brag Posts

I completed this project using pine plywood for the body and doors and a pine board for the top. Modifications included omitting the drawers and adding doors instead. Side doors open up to adjustable shelves, which I used the Kreg Shelf Pin Jig to create the holes. The hardest part was fitting the doors. I would suggest waiting until the unit is build, then cut to size leaving space for your paint or polyurethane finish. The hinges are from Lowes and the knobs are from Hobby Lobby. I did add veneer edging to the front as well as the sides of the doors- this was a bit messy and I spent a lot of time sanding off the adhesive that seeped out the sides. I used an old iron I picked up at Goodwill so I wouldn't ruin my clothing iron.

After diving head-first into this website and too many projects to mention, I decided it was about time to have a workbench. I received some free scrap wood from my neighbor so I spent a quick couple of hours putting this together. The plans were great and it went together very quickly. Looking forward to using this for more projects!

I used a combination of the farmhouse table and the tryde coffee table (but on a larger scale). I don't have a Kreg drill or any of that and so I just screwed from the top side down. Since I knew the screws would show, I decided to take a platinum/shiny silver Sharpie to color over the screw heads to make them stand out.

The legs were a 2x4s glued and screwed together. Can't find any untreated 4x4 at the local Lowes or Home Depot, so this was my next best option.

I used a few coats of Rustoleum Dark Walnut and then Rustoleum Semi-Gloss poly.

I have since made a new bench with the same main design, but just to a small scale. Also, I did it opposite of the top. The table is 2x4 with 2x6 breadboard ends. The bench is 2x6 with 2x4 breadboard ends.

This is The Traditional Wood Toddler Bed. Built straight from the plans. Worked out great and my daughter loved it!

X Bookshelf. Followed Ana's great plan, only change was to spare 1x4s that I planked for shelves. Finished with antique white milk paint. Very happy with result.

We built 2 XLarge Porch Benches,they where easy to build & look fabulous! Best part was it was a fraction of the cost if I were to buy these new!!! Thank you Ana!!! 

-Sandra 

After Xmas I decided we needed a better place to keep our growing collection of board games. I made mine a bit deeper to fit our longer board games. Also, put a 3rd door on it. We also needed a central place to charge our phones and tablets. Paired with the top of the bedside charging table this cabinet is the perfect solution. Thank you!

Believe it or not, this is my very first furniture project.  Inspired by my 8 yrs old son special needs to be able to draw his curtains close whenever he felt the need, I happily took on the challenge to build this for his pirate themed bedroom.  I have not filled the holes yet nor have I stained it in the walnut finish we have chosen.  The weather is just too cold for my taste (will wait until spring).  Currently, I will work on hemming the curtains.  I am just so proud that I could not wait until next year to share it with you all. I carefully changed the dimensions to a full size bed, changed the storage shelves sizes to accommodate 8 cube bins and 2 book shelves, added the canopy and some multi-coloured adjustable LED lights. Feeling so proud and have one really thrilled little boy!  Thanks Ana!!!

Farmhouse Table 

Few Modifications, Tools use Miter Sae, Table Saw and Planer 

Check My Work At https://www.facebook.com/Custom-Patio-Retreats-1764656797122875/

We based this bed on plans we found on the Ana White website, but after final assembly we decided it was just a tad too low. Eventually we got around to adding the legs, which were made with left over pieces (from the bed project) of 2x6, cut to 11in.  We've been very pleased with the appearance, stability, and height of the bed this way. Now to wait for some nice weather to take out to the garage and stain/finish! If we would build it again, we would increase the width by an inch or two because the plans we followed "as-is" ended up being the exact dimensions of our mattress. Thankfully a foam mattress will squish into it and we won't have to rebuild for the extra inch. Overall pleased with our new bed. 

This is my husband's second project. He actually made 2 this weekend, one for my son and the other for my nephew. He lowered the bottom shelf to allow more room for books. He used a cherry stain. We love how it turned out-functional and nice to look at. I would say about 2 1/2 -3 hours to complete the project.

I built this with leftover ceramic tiles and using the pedestal table plans. I built it at the same height as our bar. The stools are from the vinatage bar stool plans and are modified with the rustic X as bracing for the legs, upholstery and are at a seat height of 25" rather than the 30". 

This easel was my 2nd Ana White project.

I decided to use an old picture frame to surround the chalkboard portion of the easel. I picked it up at an antique shop for under $5.

The wood was left unfinished, mostly because I ran out of time (I still haven't sanded the putty spots!). But now, I actually prefer it that way because it blends better with our furnishings. The legs of the easel are hinged so that it can fold up when not in use (I added removable pins on the tray support to make this happen).

This easel has been used every day - It has been such a great addition!

Thanks Ana for the great plans!