Community Brag Posts

We just recently moved and we need a dining table for outside. I wasn't happy or interested in the high cost of a low quality crappy steel table set. So i went out and bought the lumber and built the table.I noted that it took me a week to build this table. If I had the weekend dedicated to building it, it would have only taken me the weekend, but life got in the way and it took me a solid week. I used treated lumber for the legs of the table and went with untreated for the rest. I applied some Behr Weatherproofing stain. I thought it turned out great. The only problem i had with the table was that in the plans they are made for a 4X4 that is actually a 4X4. The ones i acquired was 3 1/2 X 3 1/2. It did not cause to much of a problem I just added an extra inch on the skirt. I also was not a big fan of having the feet of the table in direct contact with the ground. Especially on those rainy days. ( Which we have been having a lot of this season) So i went out and I got some Hockey Pucks. Yup some good ol' Canadian hockey pucks. I centered them and screwed them in. Not only do they elevate the table they act as a good grip to the patio stones. By the way this was my first build ever. Excited to get the benches done now. 

Here is a pic of kitchen cabinets I built using Ana's plans.

I enjoyed making this outdoor sofa and table combo from Ana's Ryobi series.  An inexpensive and easy project that we just love!  All construction grade 2x4.

I used the plans from Mimi's Storage bench to create my own foyer storage. I narrowed the width to fit my space, but otherwise kept the plans nearly the same. You can read more about the details on my blog:
http://magic-blue-smoke.blogspot.com/2012/12/foyer-storage-part-1.html
http://magic-blue-smoke.blogspot.com/2013/02/foyer-storage-part-2.html
http://magic-blue-smoke.blogspot.com/2013/02/tree-hutch-part-3.html
http://magic-blue-smoke.blogspot.com/2013/03/final-bench-post.html
http://magic-blue-smoke.blogspot.com/2013/03/bench-painting-for-real-th…
http://magic-blue-smoke.blogspot.com/2013/03/tree-hutch-top.html
http://magic-blue-smoke.blogspot.com/2013/03/foyer-furniture-finally-co…
http://magic-blue-smoke.blogspot.com/2013/04/making-bench-cushion.html

I basically just followed the plans on this site. it is really a pretty simple build but it helps to have a second person and it is very time consuming.

I have several furniture projects that in my blog pipeline :) After finding Ana-white.com a while back and getting inspired by some of her projects. I’m tackling all sorts of my own DIY furniture projects! This straightforward locker transformation is one of my fav’s! Ward and I found this gem at a antique store’s going out of business sale. We got it for $120. I then spent another $310 on lumber (I bought Fir which is WAY more than say … Pine or Poplar).

I have a tutorial on my blog that goes in detail, unfortunately I never take enough pictures and I only got one before picture.

We built this coop from an existing playhouse and used Ana's plans to build the run!  So easy and turned out perfectly!

Large cooler stand built for a huge cooler. I wanted to be able to take the cooler out, so it oversized for the cooler, with slats on the bottom to hold the cooler for draining without water sitting on a solid surface inside.

We finally got our grass green and back yard clean, after all that work the lop sided blue little tykes picnic table stood out like a sore thumb. This was the perfect table to fit our back yard make over.

When Ana says read all comments she means it. Cherie posted "if you plan carefully you really only need 5-2x4's instead of 6. Cut 2-2x4's in half for the seats. Cut 2 legs and one seat support from the third 2x4. Repeat for the fourth 2x4 and finally cut the bottom suppport and the 2 table supports from the 5th 2x4. Just plan carefully." I still bought 6 2x4's but only used 5.
I did pocket holes on almost all the joints. I put the table on risers and was even able to use a pocket hole to add the seat boards. I did have a bit of a problem with the table top supports, I am not sure what others did but I cut mine at 45 degrees and they still wasn't enough to get the measurements the plans had. I just left it and marked where it would have been. I had some scraps from a fence pickets I ripped for my $10 raided garden bed left,over that I used as a spacer for my table top and seat boards, made it so easy and they are perfectly spaced. They are just over 1/2 an inch but It worked great.

http://ana-white.com/2010/04/plans-bigger-kids-picnic-table.html

This week's project was a wine rack that I built for my aunt.

Blog: http://www.lanebroswoodshop.com/2015/04/pallet-wine-rack.html

YouTube Video: https://www.youtube.com/watch?v=NUB6UEaLXtE

Easy build, love how it turned out.