Rustic Waterfall Console Table
Built it from Black Ash
Built it from Black Ash
The seesaw is like a dinosaur: the extinct relic of the playground, still held in awe by kids the world over. No longer available to the public in its original form, the original seesaw is the perfect DIY project. My older daughter had been asking for one for a couple of years, and after finding the plans on Ana White’s website I was able to build one cheaply for about $50 in wood and screws. This was the perfect weekend project, and I was able to use up some leftover paint and fabric to create this nice addition to our yard.
Check out my blog post about this seesaw here:
http://sandiegocountypropertymanagement.com/diy-kids-seesaw/
Made two of these for our twins! Lots of steps and measuring but pretty simple!
Sun, 01/21/2018 - 16:32
I'm making these beds and love your stain! I have tried several sample stains and cannot find one I like. Where did you find your stain?
Outdoor Coffee Table
I was asked to build a bench for our high school softball team room and used these plans to build the support. I was planning on building it exactly as it was in the plans, but a kind soul donated some poplar plywood mdf for the top, making it a smoother and more polished finish. I added some accent trim along the wall. Finished it off with school color (navy blue) on the legs and a clear satin lacquer finish on the bench. Love how it turned out!
Part of the Benchright collection. This was easy to make and it turned out so much prettier than I imagined. I love it!
I built this for my daughter's 4th birthday. The kids love it!
This was my first wood working project, and it came out great!
Please note - the buy list leaves out the 2x10s needed for the sides.
I loved the post from Lady Goats on the PB inspired daily system and the modifications from debandtom25!
I knew this was an answer to clean up our counter, before items even make it to the counter this is right at the door when you walk in our house!
I didn't use a picture frame but used plywood with molding of my choice for the "frame." I selected paint at Home Depot and just purchased the sample paint in three different colors. The wording was done on a computer and used as a stencil (cut the letters into contact paper, stuck contact paper on and painted).
I did this all with fence panels. The dimensions were determined by my 2x4's. I trimmed the pickets to size and overlapped them to give it a real siding look. Then I power washed it and let the kids have fun, we have not finished decorating but we will and I am sure it will change over time since their decoration of choice is chalk. I say a weekend because you need to inventory what lengths of wood you have to plan it out and the smaller cuts for the siding can be time consuming. This didn't cost me a thing I had screws left over from building a deck. I built each wall then screwed them together and attached siding making sure to only screw into the facing wall so I could disassemble if needed.
Awesome rustic book case that was inspired by an Arhaus table. It is a fun twist on a traditional book shelf with tons of character!
I'm calling this a Skiki Bar which is a word play on Tiki bar. It is based on the Simple Rolling Cart design. I used my own dimensions according to the width of cross-country skis. I have a large number of these old skis for projects. They are sold for very cheap at garage sales, etc. The top of the bar is made from boards that I had removed from an Adirondack chair set, which I had made Ski chairs with. So those were already stained and they matched the stain I used on the pine 2x4 frame of this Skiki Bar. I already had a pair of wheels laying around so I only had to buy 2 more of the same size. The pictures were taken before I installed a shelf on the bottom with some scrap plywood I had in my garage.
I estimated the time to factor in how long it takes to stain all the boards and let them dry.
On the left edge I installed a Ski bottle opener I made.
I estimated my cost on what I bought that I didn't already have. I bought the pine 2x4's (also a 1x4, 1x6), Construction Screws, Stainless Steel Screws (For attaching skis), and 2 wheels.
I already had: Skis, Bar top boards, 2 wheels, deck screws (attaching the bar top boards from underneath), stain, clear coat, wood glue and tools.
My next project is to make Ski bar stools. Thanks for having a look at my design!
Waterfall framed coffee table
Whew! I am a total novice. I have never used a saw in my life, but with a little bit of instruction from my husband i was able to do it almost completely on my own. Even as a beginner i could have finished it in a full day, but i was trying to work on it during my daughters naps so it took almost a week!
I used the basic Raised cedar garden bed plans with a few alterations. I made them different sizes, stacked one on top of the other for some dimension in my garden and secured them together from in inside.
I recently spotted a little gem in the garage - a little space in between the garage doors. It was perfect for building a modular system of small French cleat box shelves. I made them all using scrap wood. I even had extra scrap wood to make a battery charging station in another narrow gap on the wall. You can read all the details about my latest storage adventure on my blog:
http://www.justmeasuringup.com/blog/using-commonly-lost-garage-spaces-for-storage
I'm on high alert for more areas like this that get overlooked easily, and am just waiting for more inspiration to strike!
Started the project last fall and finally finished it this Feb. Check out the cool weather station!
This was my first major project I built from this site. I would say that I am a beginner builder with only a little experience building small things. This was my first big project and I built it piece by piece over the course of a few months. This was my 4 year old's birthday gift. I bought my first Kreg Jig Jr. (I already want the master system!) and got a lot of confidence by doing this project. It was pretty straight forward, although the painting and sanding took way longer than I thought! I pretty much stuck to the plans and did not change much. The only thing I did was add hand hole cut outs on the stairs and I chose not to cut out a side window because that side was against a wall anyways. I am SO excited about this project and will be posting MANY MORE builds from here.
Sun, 10/21/2012 - 22:14
Great job dude! I bet your daughter loves it. I am going to start building one for my nephews this week, hopefully it looks half as good as yours!