Community Brag Posts

I have a really boring backyard patio so I thought I would spice it up with flowers but I could not find a plan for a large right angle planter. So I made up my own.

The planter is made from cedar fencing but pine for the top trim and the corner legs. The legs have grooves that the sides slide into and are not screwed or glued in place. That is so you can remove the top trim and then just pull the sides out to replace them as needed or to even change the size of the planter.

This planter is 18" high so it is comfortable to sit on but that also means you will need a lot of soil to fill it up. Mine took 26 40lb bags which is over 1/2 ton of soil. Add water and that planter is here to stay. But it also means that there is a large tendency for the sides to bulge along the bottom so I placed stop blocks along the bottom base and screwed into the base.

I planted Angelonia for color and sage, oregano, and thyme for spice. It was fun to build and came out well but it was expensive as the soil along was nearly $60. Add another $50 for lumber and screws and you have exceeded the magic $100 mark. Still a good deal, however.

I managed to build this with a circular saw and some sand paper with absolutely no experience!! I am so happy with the results. I followed the plans precisely as I am not brave enough to experiment yet. I used Minwax Polyshade Mission Oak flavor. I've never stained anything before and I was pleased with the results. A couple coats and the shade is beautiful. I am going to fashion a couple benches and find me some brightly colored chairs and call it done. 

Thank you for making this possible. I certainly never thought I could do something like this. 

Our first project using the plans provided on this web site.  We couldn't be happier with the outcome.  The plans were concise, accurate and easy to follow.

I put the two planter boxes on this site together to get a perfect little lattice box for the space by my door. I get lots of compliments and hopefully soon I will have yummy jasmine welcoming my guests.

I had a few scraps of wood left over from a fence I took down. I wanted to make a clock for the state I live in. I also used shotgun shells for the numbers. It only took half a day to make and it was fun to see what the finished product looked like.

We finally got our outdoor porch cleaned out and needed some additional seating.  Loved all the different designs based on Ana's 2x4 sofa.  Used Cedar boards instead of Pine.  

I was making the fancy x desk, and my wife suggested building a bench to go with it to make it a bar style kitchen table to take up less space in our kitchen. So I looked up plans for a bench on here (providence bench looked best with it), and built it. I painted it with rust-oleum American accents spray paint for wood, metal, and plastic in glossy black and surprisingly it looked amazing!

Thanks to www.shanty-2-chic.com for this plan! I needed a workbench for all these projects that I was starting and I was tired of getting out a piece of plywood and the sawhorses every time. So this was just perfect for what I needed!

Built by Richelle Munro

"I love all your plans, and I have made quite a few of them now! This is one of my favourite! I used old barn wood for the top, and ship lap for the bottom and doors!"

I altered the dimensions slightly so that it wouldn't be overbearing in my living room. It is much shorter than the plan suggests, and the length and width are also changed. I used framing 2x4 and 2x6 lumber, so I had to sand the heck out of it to make it nice and smooth. It looks great next to the console table. Good plan.

I built this with the intent of making it all drawers. So there is not a cabinet with doors in the center.

A great one board project using some left over cedar that was collecting dust.  Using a 1/2" round over bit I eased the outside corners as well as the drawer sides.  I find that the drawers will slide easier with a slight round over applied.  I left the cedar without a stain and two coats of satin clear.  

Using Ana's garden bench design, I modified the plans slightly to make the bench less deep in order to fit on my narrow porch.

This was the first plans we used from Ana White and it turned out great. Modified the desk to be a little shorter and have dual drawers in the front.