Community Brag Posts

We used Ana's plans from her dining room banquette bench and made a bench for our boys' toyroom. We didn't put a back on because the bench sits in the middle of the room. We love the way it turned out! Thanks, Ana!

I used the Cabin Bunk Bed system as a starting point for these plans.  This was my first major build of any kind of furniture, except for a small basic coffee table and pantry.  I took all the dimensions of the lumber, then put them into SketchUp to make sure the bed would fit in my daughter's room first.  My major mistake was using regular dimensions instead of board dimensions.  That cost me a couple days at least because I would have to go measure, then cut, then fit together.

I decided not to do the drawers because I didn't know how to do it and was exhausted by the time this was finished, so I'm using it as a cubby and robe hanger instead.  I designed the steps myself using 3/4" plywood.  I then painted the bed with semi-gloss white, 2 coats for durability. 

Structurally, I was wary because it shook pretty bad, but put an angled brace on the desk side.  That side was the weak point by far, but I got it sturdy enough for my daughter. 

Only 2 more to build. LOL

This was my second project. I am very happy with the way they turned out. The plans were very easy to follow. I did add L brackets to the legs as others have suggested. I added handles to my trundle because I could not get the cut-out handles consistent.

Very easy garage shelving

Doug Fir Hutch

I am SO excited to show off my first build, thanks to Ana White and her amazing book!! This console was on the cover and I fell in LOVE LOVE! After I finished it I tried to find out the paint color with no luck....can't stop a woman on a mission...I googled looking for an iPhone App to match colors. BINGO! Benjamin Moore has one. I took a pic of the table in the book, and...you tell me...it sure looks like a match!

Thank you Ana so much for your generous help showing girls like me...YES WE CAN!

This was my first attempt at building a bed. My wife wanted to buy my 2-year old a twin bed from one of the big box stores. I asked her to let me take a crack at it before she spent several hundred dollars (and hours of assembly for me!). I immediately went to Ana's site first and found this plan. Since my wife loves all things PB, it was an easy sell.

I spent about $75 on lumber at Blue and about $20 on hardware at Orange. I also used this project as an excuse to buy a random orbitsl sander, so altogether, I spent less than $150. The mattress is a Serta Benson that we picked up for $180 after taxes and a Black Friday special. It came with a free box spring, but I declined because I used slats and didn't want the bed any higher.

I followed the plans in terms of measurements and dimensions. However, I modified the headboard and footboard. I omitted the cross pieces on the headboard and used quarter-round pine trim to hide some imperfections on my plywood cuts. I think it turned out OK.

Bookshelf for my son. Made out of pine, painted distressed,  and a stained top

The table is one that I have been waiting for my husband to retire from the Marines to make me. We moved so often while in the military that I knew there was no need to buy expensive furniture just to get damaged. When I found the plans for this I was thrilled.

The edges of the table have been sanded to resemble the worn weathered look.

Please forgive the pictures. I will retake soon.

Love how this turned out!! Thank you thank you Ana!! Plans were great, I think we got it done for just about $250! 

Thanks again!

Since everyone else is making them, I had to jump on the bandwagon.  Typical end table, but I left off the metal trim (for now at least) and used a wire brush on the top boards to eat away at the wood and raise the grain.  It gives it tremendous texture and really makes it look more like old reclaimed lumber.

I built this for my daughters for Christmas. I also built another for my friends daughter. Ours is made putting 3 pieces of wood together with pocket hole screws and our friends is just one solid piece. I definitely recommend doing it with just the solid piece. It makes it easier for coloring! It took me about a total of 5 hours to make the 2 tables and 4 chairs not including paint.

After following Ana and a couple other talented ladies I decided to get a Kreg and take some action! I made a few adjustments to the size and I used pocket screws to put this together. It is solid! Found the baskets at Lowes and fell in love. It was super easy and my husband couldn't believe I put it together so fast. I has added much needed storage to the front door and we just love it.

My brother-and-law has been building a TON of projects from Ana's site. After comparing prices of farmhouse tables online, my husband and I decided to try building our own. I measured our dining room, modified the plans (to make the table slightly shorter and slightly wider), then we picked up some basic tools and lumber, setup a little shop in our garage, and went to work. It took us a whole week (of after-work and after-the-kids-are-down nights) plus maybe a weekend to complete this project.

We started staining the legs of the table with a minwax stain in Dark Walnut, but it left it looking very contrasty/zebra-like. An employee at the hardware store recommended Rust-o-Leum, so we finished up the top with it. Added a clear satin varnish on top (Deft), then moved it inside. We love it!!! (We stained it after distressing it, then added 5-6 coats of varnish).

Things we'd do differently:
1. Invest early in a Pocket Hole Jig (like the Kreg Jig) to piece your wood together. We actually bought one for our second wood project (which I was able to screw together pretty much the entire thing myself...whereas, both my hub and I had to work together to get this table put together...it was a pain!), and wished we had purchased this earlier.

2. Check your wood and get it as straight (not bowed) as possible. Then don't let the sprinklers or rain get on it. :) Don't worry about knots, holes, or other things that could give your table character.

3. You can stain the wood using paper towels. (I did this on the second project...worked great, and easy clean up).

4. Make sure you square up your wood every step of the way. We THOUGHT we did this...but with trying to screw pieces together, and making them fit... now we've got an extra piece of wood underneath one of our legs. :P

My husband and I built this bed for my sister-in-law for Christmas. It took us about a week of working an hour or so a day on it. Most of that time was staining. The actually assembly took about 2 hours. 

I included a picture of how we attach the siderails to the headboard/footboard. We use a bracket that the 1x2 slides into. It is screwed to both the siderail and the headboard with 1 1/4" screws. We also attach a small L bracket to each corner with helps remove any wiggle that was there previously. It really makes the bed much more stable by adding those little L brackets. Again, we used 1 1/4" screws to attach them.