Community Brag Posts

my mirrror storage but sprayed black

I went with inset doors with chicken wire instead of the sliding barn doors, and I added an additional shelf.

I constructed this generous sized king-size headboard (tagged "Sweet Dreams") from a large number of beautiful deep discounted photo frames (pretty matting, exotic glass, all black purchased from Kroger for $1 each on a clearance rack) and featuring favorite photos of my daughter (for whom the headboard gift was intended) and her husband and children. For little more cost in wood for the framing and rope lighting to provide a soft glow through the channeled glass that surrounded each photo in the center frames made this the perfect gift. When it was hung on the wall with legs for support and mounted on a "french cleat". I coupled the headboard with two beautiful black nightstands I bought from a yardsale and painted to match the headboard. Then we placed wrought iron candlelabras over each nightstand and VOILA! It is a beautiful beadroom! Total cost: approximately $60 Best footnote, the photos can be changed out to keep the headboard fresh and current. (Do know...this is VERY heavy and must be handled with great care because of all the glass in the frames.)

I used 2 x4 x8 cedar instead of the the 1x4x8

Modified the plans to have sides like the wide cabin dresser, and took out top two drawers for media center

I made this for my girls' huge collection of dress-up clothes. I had to modify the plans a little to fit more costumes, and also to try to fit the longer length. I was hoping the longer dresses would hang without filling the bottom quite so much, but to make it tall enough for that the little one wouldn't have been able to reach the hanger bar.

I ended up with 4 foot boards all around - 6 pieces of 1x12 cut to 4 feet long, including the shelf at the top.

The eight year old cut the letters out of scrapbook paper and we glued them on with elmers glue then varnished over it.

All in all it looks great and holds 4 big plastic totes worth of dress-up (11 Halloweens/4 little girls/5 flower girl dresses and miscellaneous other outfits).

Now I'm just hoping they'll learn to use hangers and it will stay neat and tidy!

Construction was very easy and went well - took us longer to shop than it did to build!

Painting on the other hand took a long time, mostly just to wait between coats. I used spray paint and some polyurethane to gloss it up.

I love my new lockers, and I am in love with building! I think the Kreg Pocket Jig is my new best friend!

This is my first project, and I made a couple of changes to Ana's awesome plans. I used bead board for the backing instead of ply wood, and I added divider shelves on the bottom shelf. I also added hooks on both sides of each locker so that my kids can hang lots of stuff.

Since I am a total beginner builder, I made a few mistakes as I built these lockers. If you are a beginner, too, please check out my post on OneCreativeMommy.com so that you don't have to make the same mistakes! I included a chart that shows the order I used to put everything together and added instructions for the extra dividers.

I am loving my organized space (and so are my kids)!

See the project now: http://bit.ly/lockers-kids
Pin it for later: http://bit.ly/14FpeHD

Although it looks like a console now, the eventual use of this project will be as a vanity with a top-mount sink! 

My wife first saw these in Pottery Barn one day listed for over $2,000.00, we then stumbled upon Ana White's Website and noticed she had plans. I printed them out and went to lowes to buy the material. I didnt own a saw so I had them cut the MDF for me. They ended up cutting it way off from the measurments so I ended up buying a skil saw and some stain grade pine and went to work. I get frustrated following measurements, so I ended up just looking at a picture and making it custom. Took me a few months working on it every few days, sometimes a week at a time. Thanks for looking!

Easier than I thought!

All wood used was reclaimed. Some tabletop pieces were warped, but added character to the table. Took about four 6-hour days with interruptions in between. I bought the stain from the Habitat store for $1.50 and the poly was left at the house we recently moved into. The stain was brushed on then rubbed in with a rag. I originally used about six coats of oil-based poly and when that didn't seem to work, I applied 2 coats of Polycrylic.

I would like to thank www.stonecoatcountertops.com for the ideas on the countertops, 

first off I used 3/4 MDF for this project, Ana White's momplex cabinet plans and just extended the plans to the size i needed, i created the doors out of MDF cut to size and used a router to create the design on the edge and the countertops are made with MDF, expoxy,spray paint, and metallic powder in 91% alcohol. this plan was so eazy, and my kids had a blast doing it, Thanks Ana for the cabinet plans

I made this bed for my 2 girls who share a room. It was my first real attempt at building anything substantial. They are thrilled. The plans were so easy to follow. The only thing I did different was use 3 inch screws in the hutch base because I felt it made it more sturdy. I used bead board for the outside of the hutch and the back of the book cases. Thanks Ana for such great plans.

This is just a loft I made for my kids. I didn't want to spend over $1500 at PBK for a twin bed size bunk bed. the size is 4x8 enough for them to have fun.

We needed a surround for the TV and really wanted to have a fireplace underneath. I took the Shanty Hutch/Sideboard plans and made some modifications. Took about 2 weeks to complete.