Community Brag Posts

I made the back slats taller on the second chair (salmon colored one) so I could just lay my head back. They were so easy and I can't believe I did this myself! We made the baby chair with the scraps and our grandbabies love it!

First stab at this table turned out so well a friend bought it off me and I had to build a second.

LOVed building and painting this. Although using European wood is a headache as of course the standard wood sizes are different. ... always 4-6 mm off... so all my things are crooked. I don't care though and it is my new favorite chair. I used ArchiTect blue exerior color, two coats, and pine wood.
I am grateful for Ana White's metric conversion chart in the book I now have but when going to the hardware store here, I am confronted with numerous standard wood sizes that are not the same as in the US!

So I bought a tv for our bedroom rather spur of the moment last year and when I decided I didn't to wall mount it I needed a console for the tv to sit. This was going to be my 3rd build and I had recently made the Mini Farmhouse Bedside table. I modified the Mini bedside plans to make the console a larger two drawer style. I also increased the height by about 2" to put the tv at a better viewing angle. I didn't know that there was a similar plan in Ana's book at the time, as it probably would have been easier to just follow that. Oh well.

This is a pretty easy project and makes a nice holiday gift. This version was made from a scrap piece of hardwood and a 5/8" dowel. As an extra touch, I added a compartment inside the board to store the pieces. The compartment panel is held on with magnets for a clean look.

The quick video shows how the compartment works.

https://youtu.be/jEzhipj-BjA

(I don't know why my picture is horizontal, it shows up fine on my computer).
In redecorating my oldest son's room, we needed him to have a loft bed, but all the commercial loft beds are too tall for his bedroom. So then, we thought we would re-work his current bunkbed. In order to use it as a loft bed we had to remove the bottom support rails and that meant we needed a new solution for a ladder (because it was part of the support system). After looking through the site, I decided that this ladder was the best for our needs. The ladder went together smoothly. We had to modify the directions just a bit to make it the right size. We put a set of U-brackets on the end of the ladder to put over the bunk bed. We also drilled through the bed frame and into the ladder for additional support.

I sent these plans to my dad and said I wanted him to help me build it for Christmas. He came with everything cut and ready to be sanded and assembled! It was put together and stained in a day! I love my Christmas present, and love that my dad and I built it. It will be a family table, for sure! 

These are a few of my turnings. They are available for sale. Message or comment for price and shipping.

Finally happened upon a walnut slab to rejuvenate the top of my coffee table. I loved the wrought iron base, so I wanted to keep it, but the tabletop height needed increased to protect beverages from labrador tail attacks.

I cropped the existing wood top to serve for the base piece, sanded it down and stained it to blend in with the walnut. Four 2.75" wide walnut strips were used to create cubby spaces under the top slab for remotes, controllers, and keyboards.

The top slab was pretty rough, so it required heavy sanding to take finish evenly. I started with 80, 120, 220, and finished with 400, using mineral spirits to raise and knock down the grain. Finished with four coats of Waterlox original.

Made this Accessory Holder as a Christmas gift for a male cousin to hold his phone, watch, ring, glasses, and wallet.  Comes apart for easy movement.  I like the two-tone of the stains and the simplicity of the holder.  Router kept giving a bit of kickback, biting into the wood where it was unwanted, hence the messy cord line, but as with most of my projects, I don't mind the mistakes that make them more "unique".  Artistic choice?  : )  Also difficult was figuring out the angle to cut the opening slot for the side piece.  It needed to be angled to set the side piece just how I wanted it.  Eventually decided on 10 degrees.  
The idea for this holder was based on this: http://cleverwoodprojects.org/woodworking-projects-for-beginners-six-ea…

Don't read the site- it was clearly written by a bot or ESL individual, because it's mostly gibberish.  Just used the image for inspiration.

I freehanded a design that then was drawn on the wood and had plenty of fittings and mockup pieces made throughout to figure out how things would fit.  Fun challenge, great gift. 

This was our first project & we worked on it together. My husband melded the Farmhouse plan with the Chunky Leg bed box. The box is reinforced & has 13 slats. We didn't sand out areas that had bark, but left them for the texture. We worked on it a few hours each night & then painted on Saturday & puit it together on Sunday. Design-wise we raised the bed so that the bottom of the frame sits at 12 inches. We also raised the footboard above the mattress level. These changes were just our preference, but we really love how it turned out. It is sturdy, substantial & beautiful!

Awesome plans for a table that turned out perfect for our new home.

I built one for my husband but he said the top is too thin for big guy like him so when my friend asked me to build 1 for her son I attached 2 plywood together to make it stronger...