This was my second project I attempted, the hardest part was the drawer! Other than that I think it turned out great!
https://www.etsy.com/listing/152638624/handmade-narrow-end-table
I built this Workshop Step Stool as part of the #GetBuilding2015 #BuildCave challenge. It was a very easy build. I had all the needed supplies in my scrap wood. But if you did need to buy the wood, you could do it for under $10.
I found the plan here. http://www.familyhandyman.com/workshop/ridiculously-simple-shop-stool-p…
If you want to see the steps I took to build mine, as well as more pictures, please stop by my blog at http://jaimeofalltrades.blogspot.com/2015/04/diy-workshop-step-stool.ht…
This bed was a mixture of farmhouse and storage. Ana White u rule
weekend project that had been put off for about a year and finally got done. was not that challenging even for a rookie. turned out well and most of all the mrs. was pleased with it.
photo 1: materials
photo 2: lower level on left and upper level on right
photo 3:close up of each level, bottom level was stacked 2x2's plus 3/8 ply on top and 1/8 vinyl so that a 1x4 would cover the front flush and not have a lip so that tha baskets wont get caught.
photo 4: base with corner posts
photo 5: all set minus the trim boards!
final trim on the top level overlapped by 1/2" to act as a lip to hold w/d in place if they decided to "move" on me.
I made a loft bed for my 4-year-old son using Ana's Chelsea Loft plans. When I finished, I was able to build this toddler bed for my 1-year-old using almost entirely scraps left over from the loft (save for the 1x6 runners). I skipped the curved headboard design and went with a solid piece of 1x12. I was going to round the top edges or cut a more rounded design, but my wife said she liked the squared off look better (she has lots of ideas for painting various designs on it, apparently). Since we were going to use paint and not stain, I ripped some leftover MDF board for the 1x6 footers. The whole project took a single afternoon, including cutting, assembly, woodfill and sanding. The end result is pretty sturdy. My wife laid on it with both our small children and the slats hardly bowed at all.
My 8 year old really wanted a loft bed. We were homeschooling and he was struggling with fractions so I decided to use carpentry to teach him fractions. He was hands on in every aspect of this project and did 80% of the work. I’m very proud of him!
Fri, 10/08/2021 - 10:43
Such a great way to teach real world applications, thank you for sharing!
I LOVE this stool! I love the style, the function and how easy it was. I made this in just an hour while the kids were out front riding their bikes. The best part was it was a gift for my dear friend for her nursery.
I already have two more rooms in my house that are in need of this stool, so a few more are in my future.
We are in desperate need of toy storage in our playroom. We are planning to build several more of these bulk bins.
Mon, 05/04/2015 - 10:59
You did great! Thanks for sharing, now fill those things up:)
Sun, 11/20/2016 - 10:39
It was just standard pine. We painted afterwards with grey paint leftover from a kitchen project.
Built this amazing table & chairs a few years ago for a customer.
A good friend of mine needed a changing table to save space. I originally planned on building her a standing changing station but then she wanted to have one that hung and she planned on buying one that you find in a store restroom. I knew I could make her one that she wanted and that looked awesome. Here are some of the photos I have of it pre-hanging on the wall. Click the URL and you can see it being used!!!!
This was my first project and there were many starts and re-starts and tearing apart and re-doing but finished product was great! I added the arched doors to original plans and had fun with the whole project!
This was my first ever project. I would have done a good amount differently if I had to reconstruct it now, but it came out pretty good and definitely serves its purpose.
These are the changes I made compared to the original design:
It definitely took longer than I would have liked, but I could do it much faster if I had to do it again.
First time building anything. I think it came out pretty good! Thanks Ana white for the plans!!
Fri, 10/15/2021 - 15:31
Thank you for sharing, can't wait to see your next project! It looks so beautiful in your space!
Your plans made this project so much easier. We love it and have gotten a lot of compliments for it.
Fri, 06/12/2020 - 11:05
LOVE the attention to decorating details! This is beautiful. Thank you for sharing!
My daughter had talked about wanting a loft bed for a long time so after of plenty of research, we went for it. The shelves of the bookcase, except the top and bottom, are made from 3/4 plywood I had laying around. I did my best to utilize as much lumber that I already had in the basement to reduce costs.
Underneath the bed is LED Rope Lighting and the gaps under the rails were stenciled with the bear paws since my daughters nickname is Little Bear.
People have loved it enough I think there's a couple people that are going to buy the supplies so I can build it for them. The one thing I wish I had during the construction was an oscillating multi-tool to trim off the Kreg plugs. I now have one and plan on using it a fair amount.
On to the next project!!
Ben
This is a great playhouse for kids and sturdy enough for adults too. The plans are so well written and easy to follow. The deck was made exactly to her plan, but I made the playhouse a bit wider. I also framed it with 2x4's and roofed it with metal. Metal roofing is light and relatively easy to install. It took me about 1-1/2 months to finish the playhouse. The windows are hinged and can be propped open. I used 2x3's for the railing and attached it to the playhouse for stability. On the inside, I put down colorful foam mats to make it comfortable. My daughter really loves having her own playhouse! Thank you for the great plans!
This was the first project my husband and I completed from one of Ana's plans. I'd wanted a pair of Adirondack chairs for our yard, and convinced my husband that we could build them ourselves. Once he was on board, he suggested we build a pair for our neighbors as a surprise and leave them in their yard while they were out of town. We had a blast and learned a lot. We've had tons of compliments on the two sets of chairs, and during our last neighborhood garage sale, we had many offers to buy them (but we're not selling!). Thanks, Ana!
I used an all oak wood with a maple inlay on the table top to give it a different grain pattern and stand out a little more than just one type of wood. My wife wanted 3 shelves so she could display all our babies photos in our living room, toys on the bottom and odd storage in the middle. The way I figured to find the height of the second shelve was because we have a scentsy warmer and the basket we use to hold the scents I made to just fit under the table top. I also went with a fancier router-ed edge to the top which has three grooves instead of your normal round over or just square. I used a lot of kreg jigs to put this together and the two bottom shelves are free floating without a support beam. The way I did it made it really sturdy with clean lines on the peace. I sanded the whole project to 400 which made it feel like glass. If you would like to know more ask questions. I love to do this type of stuff.
Fri, 10/18/2013 - 01:46
I just finished a second, smaller version of this one for one of my friends who just got married. I also inscribed their names and date they got married on the bottom. I made it look like a carving in tree. It was pretty cool.
This is the project that inspired me to start woodworking. I'm a bookaholic and have always used cheap, particle board bookcases from Walmart for storage. They're fine for the price, but over time the shelves bow and they NEVER survive a move. When I outgrew the three units I had, I balked at buying a fourth, which I didn't really have room for anyway. Enter Ana White! This is actually based off a brag project under the IKEA Lack Inspired Bookcase. What I love best about building my own is that I can customize to suit my needs. I was able to put almost twice as much shelving into about the same area. And if I outgrow these, I can just build another!
