Community Brag Posts

Apothecary cabinet

Submitted by Anonymous (not verified) on Thu, 03/09/2017 - 06:47

I've wanted to build one of these forever! I changed the plans a lot to accommodate my needs, but I loved the idea of faux drawers on the doors to have an authentic look. It fools most people! Took 2 weeks for me to complete, working on and off. It has great storage inside for all the kids' stuff I didn't have a place for previously. The stain is ebony by minwax and the hardware pulls I purchased for under $10 for 30. 

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax ebony stain with varathane poly in satin
Recommended Skill Level
Intermediate

Kentwood Bookshelf

Submitted by cwatson on Wed, 12/30/2020 - 05:03

Built the Kentwood Bookshelves for our living room. Bookcases are 6ft. Made of Pine and Whitewood. This is my 2nd build and looking forward to more.

Estimated Cost
325
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Colonial Maple
Recommended Skill Level
Intermediate

Doll High Chairs

Submitted by sraper2 on Mon, 02/04/2013 - 06:53

Built these for my daughters for Christmas. They are super easy and fun to make!

Built from Plan(s)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Hanging Wall File

Submitted by naomi on Mon, 12/08/2014 - 03:38

This was just a quick little project as we decided we needed a bit of organisation in the office.

I just used scrap mdf and leftover bits and pieces from other projects for this wall file. We now have somewhere to put all the postage stuff for our online sales site.

Cheers... Nay

Built from Plan(s)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
White enamel paint
Recommended Skill Level
Starter Project

Liam's Christmas Day Barn Bed

Submitted by Anonymous (not verified) on Sat, 03/11/2017 - 17:52

Our son Liam-Joseph wanted a "Big-Boy Bed" and then he added "I want Daddy and Santa to make it".  Well "Santa" and my wife Jacques looked all over the internet and finally found your Cabin Bed via jennwoodhouse.com.  Jacques altered the plans demensions and she realized the bed could be barn-like so she came up with the red and gray paint job.  She actually wanted a cupola but I thankfully talked her out of that.  Well somehow we keep the construction from Liam 2 weeks before Christmas.  On Christmas Eve Liam's Grandparents keep him at their house while "Santa" and I put the bed together (I never did a trial run so I was relieved when everything fit right together).  The next day after opening his presents he ran up to his room and saw his bed for the first time.

The project isn't completed.  I recently finished the roof with wood pallets but I need to finish the trimming of the interior of the bed walls.  

Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Intermediate

Altered apothecary console

Submitted by scooper812 on Fri, 01/01/2021 - 19:56

I built this based on the apothecary console plans but with the modifications that VLilly made for the Altered Apothecary Media Console. Very happy with how it turned out! Thank you Ana for sharing the plans!

Built from Plan(s)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Whitewash, stain, distress, polycrylic
Recommended Skill Level
Intermediate

Comments

Planked Headboard / Waterbed Build

I don't have photos of the build but I did acquire some pictures of the assembly.
 
What we added to the shopping list for a king was 3 1x6x8's (he bought 6 total instead of 1x6x10's) and 1 1x4x8. To build it in a king or California king just take a measurement of the top or bottom of the bed frame to find the length to all of the horizontal boards. This takes care of the headboard. For the frame we simply built it to fit out of four 2x10x10's. 
 
I also used my Kreg Jig to attach all of the center horizontal boards together with pocket holes instead of adding supports to the back.
Built from Plan(s)
Estimated Cost
$150.00 for the entire bed.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Rust-Oleum English Chestnut
Recommended Skill Level
Beginner

X Frame country coffee table

Wanted something sturdy because of my kids. Found the project on here and was fairly simple to build. The step by step instructions really helped.

Estimated Cost
$65
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Special walnut stain with gloss white paint. 3 coats polyurethane on the top. Sanded between each coat with 320 grit.
Recommended Skill Level
Intermediate

Comments

Simple Side Table

Submitted by mom of 4 on Fri, 02/08/2013 - 15:30

I built this for a friend who needed a small side table. All the cuts were made with a chop saw. I used 1X3 furring strips and 2X2's. It was a little tricky to get all the table slats to match up. I used the Kreg jig to conceal all the screws and get stronger joints. I love that thing!

Built from Plan(s)
Estimated Cost
$10
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
I brushed on two coats of Minwax Polyshades in Honey Pine Gloss, then rubbed in a coat of Howard Feed-N-Wax.
Recommended Skill Level
Beginner

Economical Basement Shelving 2

Submitted by Veronica P on Sun, 12/14/2014 - 19:41

I've been organizing our unfinished basement so that my boys have more space to run and ride their bikes over the winter. I needed something to organize our off season clothes and bins of clothes that my boys are growing in/out of. This plan was perfect. It's not my prettiest build but it's soooo functional!

Estimated Cost
$100
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
None
Recommended Skill Level
Starter Project

Comments

Joe Shape

Submitted by Anonymous (not verified) on Wed, 03/15/2017 - 21:19

Fun and easy project. I couldn't be happier with the end results. Great plan from Ana White. 

Estimated Cost
$83 for coffee and end table.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Waterlox on top and Sherwin Williams furniture paint on frame.
Recommended Skill Level
Intermediate

Potting bench

Submitted by Anonymous (not verified) on Tue, 01/12/2021 - 10:46

I used redwood lumber, 2x4s and 1x6s only. I wanted the bench to be a little taller so I used 2x4x10s for the legs to make work surface 38” high and total height 66”. To get the most out of the 8’ 1x6s I made the bench 48” wide. I also had to adjust the depth since I did not use 1x4s. And finally, I sanded the 1x6s because they were rough sawn.
Very fun project! Once I figured out the adjusted cut list the whole project came together in a matter of a few hours.

Estimated Cost
$100
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Light sanding, No finish.
Recommended Skill Level
Beginner

Foolproof Fort

Ethan and I did a little project last week.

It’s been windy and cold outside and we’ve been running out of indoor activities. We made Valentine decor, heart-shaped food, colored, met friends at museums and toddler-rock’n-roll-playing coffee joints, played trains and kitchen and dinosaurs, read a hundred books.

One super fun source of indoor entertainment we’ve never successfully completed is building a fort.

When I was young, I was the fort-making queen. My parents had this incredible 80′s-style glass-and-metal table with huge leather and wood chairs (it was insane), each piece weighing what seemed like a million pounds—PERFECT fort building materials. Blankets, pillows, books, and toys made a wonderland of imagination for me and my friends. I remember supporting corners of blankets with this heavy old clay jug and other skull-crushing items that could have crashed down at any wrong movement. How we make it through childhood is beyond me.

I guess our furniture selection is just not fort-worthy. At least, not in the sense that doesn’t pose the risk of a chair toppling on him, undoubtedly leading to suffocation and/or a concussion.

So a few minutes spent reading Ana White’s website, a little trip to the hardware store (where a visit to the “big saw” was requested only to end in wimpers of “no saw, I’m scared!”), about $25, and a little sweat later, we had a perfect little “fort” with no chance of injury, one that doesn’t need to be disassembled…ever.

We had everything cut down at the hardware store. Paint was leftover from Ethan’s train board, side panels made from Target tab-top curtains I’ve had since college. Really.

It was Ethan’s first construction project so I started him off right—with sanding.

When everything was nice and smooth, we had lunch and the Peanut hit the hay while I took out the “big mama bit collection” and started drilling. As usual, Ana’s plans were very well illustrated and straightforward…we used her oven door plan for Ethan’s kitchen and it worked perfectly.

By the time Little Man woke, we were ready for paint. I wondered if painting with a toddler was the smartest idea…but we just went for it.

He did GREAT. Thank you Ikea for the $2 smock.

As I’d feared, the (almost) finished product was about four feet too tall. It was massive in our living room!

So a few days later the Hubs helped me cut it down with our chop saw. So much for making things easy by having all the wood pre-cut. I guess Ana’s house is much bigger than ours.

My next task was hemming, narrowing, and velcro-izing the panels. With a much shorter tent, my trusty old curtains were way too long. Plus, I wasn’t so sure about Ana’s suggestion to staple curtain to tent…it seemed much too permanent What if we want to add a stamped pattern? Or a window? Or change up the fabric? Velcro seemed safer.

Sure, it’s not the fastest way, but I think it was worth the time. And my $20 craigslist sewing machine handled it like a champ.

We’ve already done some good lazin’ around in the new fort. Or nook. Or tent. Whatever, Ethan seems to think it is pretty cool.

It’s also pretty popular with our furry friends.

Built from Plan(s)
Estimated Cost
$25
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Valspar sample paint
Recommended Skill Level
Beginner

Comments

andria698

Mon, 06/10/2013 - 12:19

So, I'm curious how long and tall everything ended up. I'm thinking I need a smaller version of the original also, and yours looks just perfect. How long are the boards now? And how tall is it?

Rekourt Dining Table in Distressed Dark Walnut

Hey all my DIY friends!

 

This is my first build of the Rekourt Dining Table.  Big thanks goes out to Ana and Jen for providing these awesome plans.

 

I think I achieved this table quite well, except for a minor detail where I forgot to sand two pot holes.  It actually created a very rustik look to this table.  I decided to try the steel wool and vinegar solution combined with the black tea for the finish of this table.  I realized it adds so much richness to the wood, it's incredible.  The stain is Minwax's Dark Walnut and I topped it off with a Satin Oil-based Polyurethane.  The top and legs were also physically distressed using a variety of tools I found in my tool chest. Those included screw drivers, lag bolts, worm hole puch I created out of a leftover 2x4, chains, sanding disc, knife, hammer and much more!  That part, although tedious, was fun as it gave me the permission to bang stuff up intentionally :)

 

For the finish, I first started off by sanding very well, talking hours for the entire table. I then went out and distressed the tops in a very random fashion, trying to not repeat any patterns.  As I was doing this, I was waiting for my black tea to seep and be ready for application.  I poured boiling water in a large Mason jar and added 4-5 bags of black orange pekoe tea bags.  I waited about 2 hours before applying it with a foam brush, very liberally.  I allowed the tea to dry overnight and the following day, I applied the steel wool and white vinegar solution. My solution had been sitting for about 5 days, enough to start seeing a bit of rust in the Mason jar. The rusty solution ended up giving the wood an orangy/redish tone, which when seen under the dark walnut, added lots of depth and richness to the color.  Once dry and the wood had turned greyish/orangy/redish, I stained it using Minwax's Dark Walnut stain.  I did section by section, leaving the stain no more than 3 minutes before wiping dry.  I followed this (once the stain was dry) with two coats of oil-based polyurethane in satin (Varathane (Canada's version of the Rust-Oleum poly). I sanded the poly in between coats with 220-grit sandpaper using my orbital sander.

 

Since then, I have gone out to build about five of these, all in different lengths and sizes, including some with removable bases. The angles in the X's are a little tricky when you don't have plans for a specific size, but I have noted these down based on spacing between legs.  If any of you need andgles for specific table lengths, let me know and I may be able to help :)

 

Let me know what you think and happy building!

Estimated Cost
Table ($100) and bench ($30) in lumber.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Orange Pekoe Tea
Steel Wool (#0000) and White Vinegar
Minwax Dark Walnut Oil-based Stain
Varathane Pro Satin Oil-Based Polyurethane
Recommended Skill Level
Intermediate

Comments

Ana White Admin

Tue, 12/16/2014 - 12:22

I just clicked on your other images, boy would we love to see the turquoise island and that amazing rolling console up close:)!!!!

Dresser with Removable Changing Station Topper

Submitted by BKiel29 on Sat, 03/18/2017 - 07:35

My wife and I loved the look of the Rolling rustic wood dresser.  We didn't care for the wheels so instead I opted for legs, 2.5" long.  I simply made a couple of tweaks to the frames (the bottom 2x2 was shortened to 59.5" and the side 2x2's were extended to 34").  I then built a really simple topper that fits a changing pad and a couple of baskets my wife bought for miscellaneous supplies. The topper is removable so when my son is no longer in diapers, we can simply take the topper off and he can have a flat surface on top of his dresser.  All-in-all, we are all really happy with the end product! 

Built from Plan(s)
Estimated Cost
We used Oak plywood and boards so about $200
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Early American Stain
Recommended Skill Level
Intermediate

Comments

Adirondack chairs

Submitted by Anonymous (not verified) on Sun, 01/17/2021 - 18:39

Thanks for the awesome plans Anna! God bless.

Eddie Jimenez

Comments

Seasonal And Holiday

Dress Up consoles

I have a 2 1/2 yo daughter and a 2 yo niece, so I make most of Ana's awesome plans in duplicate! These are two versions of her Dress Up console, one was for my niece's 2nd Bday, the other I just had to make for my own little Princess!

Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Comments

KellyP

Tue, 06/18/2013 - 15:18

Since you've had experience with both, do you like having the cubby's or do you think it is sufficient without? Trying to decide which route to take. Thanks!

Rustic X Square Oversized Coffee Table

Submitted by Lotus1 on Fri, 12/19/2014 - 18:56

We could not find a large enough coffee table that we wanted so we decided to make our own.  We loved the Rustic X plan and thought if we put two tables toghether we could get the pefect table size for our living room.  Project cost us around $120 and it took us a week to complete, but we are happy with the results.  The color is a dark expresso.

Built from Plan(s)
Estimated Cost
$120
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
The stain is called Kona
Recommended Skill Level
Intermediate

Comments

Farmhouse Table

Submitted by Anonymous (not verified) on Mon, 03/20/2017 - 19:32

I love this farmhouse style. It's 7'x3' and 30" high. I got the plans from Ana white. I just made a few changes. 

Estimated Cost
$85
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax dark walnut/ minwax polyurethane
Recommended Skill Level
Intermediate

My First Bed

Submitted by toolman81 on Wed, 01/20/2021 - 12:10

This was my first bed since we can not find any in stock due to the pandemic. I switched up the headboard legs to 2x6s for a slightly wider base. This helped with the mattress in a box we ordered. I built a simple frame using 2x8s, all basic lumber from the big box store, and used 2x6s for the footboard legs. I built the bed frame just about two inches shorter in width to give it some variation in sight lines. I finished it with basic white enamel paint and put 1x4 slats under the mattress. My wife loved it and it turned out well.

Built from Plan(s)
Estimated Cost
$380
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
White Paint
Recommended Skill Level
Intermediate

Twin Headboard (2) from Farmhouse Plans

I used a combination of Ana White's book, The Handbuilt Home, and her website plans to build TWO twin sized headboards. I did not build the rails and/or footboard, because the room is too small. I simply attached the metal bed frame to the posts of the headboard. My boys love their new beds!

Estimated Cost
$100 (for both)
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Paint
Recommended Skill Level
Intermediate