1. Home

Community Brag Posts

DIY SLIDING BARN DOOR

To date this has been my favorite and fullfilling DIY project!! Skills were learned, $$ was saved and it looks fabulous!!!   It wasnt easy but it wasn't impossible.  April WIlkerson provides a detailed tutorial on her website along with a fantastic youtube video on her channell. I hope this inspires someone else to take on this challenge!!  If you have any any questions please feel free to ask me!!  Enjoy.

Blog Link
Sliding Barn Door
Built from Plan(s)
Barn Door
DIY Pallet Sliding Barn Door and DIY Track - Feature from AKA Design + Life
Estimated Cost
$100
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Special Walnut, Minwax gray, ragged white followed with a satin poly.
Recommended Skill Level
Intermediate

Best Lounger Ever

Submitted by teeninyg on Sun, 08/21/2011 - 13:37

This was my second project from the site. I wanted somewhere to read my book on the back deck. This chair is perfect. When I get tired of reading I can lay it down and take a nap. It is very sturdy and easy to put together. I do recommend using pocket holes to assemble it. I found it much easier.

Built from Plan(s)
Modern Single Outdoor Chaise Lounge
Estimated Cost
$70.00
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
I sanded the seat and sides of the chair. Then stained it with oak and finished it with polyurethane.
Recommended Skill Level
Beginner

Aquarium stand for the snake cage

My husband and I bought a milk snake a few years ago. We had the cage sitting on our kitchen table. My husband was up north visiting his family and it irritated me. So I went out to the garage to see what we had. We had some tongue and groove and some misc. Pcs of scrap pallet wood. I slapped the stand itself together in a day. 3 years later, I completed it with the live edge shelf trim and the canapy, again using live edge. The pine log Pcs are left over from our basement knee wall ledge. 

Estimated Cost
$30
Finish Used
Left raw. The live edge is coated in thick polyurethane to keep the bark solid and complete.
Recommended Skill Level
Beginner

Craft and Homework Table

Submitted by Anonymous (not verified) on Fri, 11/18/2022 - 13:31

I used the plans for the modern craft table for this build and I had some curly cherry laying around begging to be use so I used that for the top.

Built from Plan(s)
Modern Craft Table

Comments

8x10 Shed - Built by Julia Eliopoulos

I made your 8x10 shed! Turned out so well, thank you for the amazing plans.

Julia Eliopoulos

Blog Link
Julia Eliopoulos
Built from Plan(s)
Classic Shed Plans

Comments

DIY Greenhouse

Submitted by Anonymous (not verified) on Fri, 03/03/2023 - 16:02

Thank you so much for the plans. We enjoyed building it. We love it!!!

Built from Plan(s)
DIY Greenhouse

Comments

2 X 4 Adirondack Chairs and Tables with a Twist

Submitted by Anonymous (not verified) on Wed, 05/31/2023 - 15:59

I had a bunch of my old skis that I had used as a display wall in my chalet that I needed to do something with, and this was a perfect solution!

Built from Plan(s)
Sturdy Adirondack Chair Plans with Back Leg and Footstool
2x4 Outdoor Side Table

Comments

My First Project (Home Depot Inspired Bookcase)

Submitted by C.Lang on Tue, 01/31/2012 - 19:26

My wife was watching TV and she saw a Bookshelf on a Home Depot commercial with diagonal shelving. She kept telling me how much she wanted a bookshelf like that. So, for my first wood project ever, I decided to try and tackle it for her. It is slightly over 7 feet wide and a little over 6 feet tall. I am currently trying to learn sketchup8 to create plans for this project.

Unfortunately I didn't use a certain plan from Ana's site for this project, but you can find any bookcase plan and place the diagonal shelves in place of the horizontal ones.

Estimated Cost
about 500 ( because I am a novice. Im sure someone with more experience could build it for much less depending on type of finish)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Benjamin Moore Black with a pearl finish
Recommended Skill Level
Starter Project

Comments

loniwolfe

Tue, 01/31/2012 - 21:02

So you totally just solved my no fireplace dilemma! I think I'm going to take your design here and leave an open space for some electric logs. Thank you so much for sharing, it is really stunning!

C.Lang

Wed, 02/01/2012 - 06:10

Those were challenging because, as I stated before I am not even a beginner. I was going to try and use my little trim router to cut them but I learned quickly routers cause much saw dust. I don't have a router table and my router is small. I decided to use my miter saw. I measured out where the slots should go and Cut the outside boarders of the slots with my miter saw. I don't have a jig saw either so I chiseled the the remaining piece to form the slot. I then used my small trim router to smooth out the slots. After I got in a groove it went pretty fast. It was a lot of Slots. Like I said before, I am very new and I know there are easier ways to do this lol. Just a hint..If you ever use interlocking slots and plan on painting the project, I wouldn't make the slots exact to the bare wood. The primer and paint add to the thickness of the wood so it is important to take this into consideration before cutting the slots. Again, very new to this.

Guest (not verified)

Wed, 02/01/2012 - 06:28

I don't think that you can say that your "new to this" any more. You cut your teeth on quite an ambitious project. You did a fantastic job! And just wait till you learn sketchup, the FUN you will have! Keep up the great work and keep posting! Can't wait to see your next project!

Robohead

Wed, 02/01/2012 - 12:32

I've never seen a diagonal bookcase before, but I like this one. You'll never have to worry about straightening books that have fallen on their sides either.

Debi G

Sat, 02/04/2012 - 15:22

This book case looks truly expensive! My excuse is always a lack of tools, but look what you did with what you had! Everything is square and precisely done.

C.Lang

Sat, 02/04/2012 - 19:26

Thank you for your kind words. I appreciate all the input I have been getting. I look forward to posting more projects and getting more ideas.

katiesommer

Tue, 02/07/2012 - 12:16

I really hope you post your plans! You did a nice job. I'd like to use a very scaled down version of this to make a wine rack in an open cupboard we have over our sink. Might have to pick your brain later. ;)

mrs2tone

Tue, 02/07/2012 - 20:25

I saw the same commercial your wife saw, and kept trying to describe the bookshelf to my husband. Now I can show him. Thanks for posting,and I hope you figure out Sketch Up so we can see your plans!

C.Lang

Wed, 02/22/2012 - 20:33

I have started to figure it out a little bit. I thank you for the comments and am close to finishing the plans. Again thank you for your comments

Guest (not verified)

Fri, 02/17/2012 - 14:15

My daughter loves to read, I am going to see if my husband can turn this into a headboard.I will post pics if it turns out! Great Job!

C.Lang

Wed, 02/22/2012 - 20:34

That would be an amazing project. If your husband does convert it, I would love to see the final results.

Emily Mazzone (not verified)

Wed, 04/04/2012 - 11:09

And I second the headboard idea!

Angela Merrill (not verified)

Thu, 05/10/2012 - 17:29

Wow! That is wonderful...I have a similar one that I LOVE and wanted for years. It was in the Pottery Barn Catalog and OUTRAGEOUSLY priced...I don't remember exactly the $$. When "Hold Everything", a subsidiary of PB, went out of business, I got the second to last one they had in stock for $200. AND...When I saw the HD commercial I realized I might be able to make a more custom version someday. Your story inspired me to plan something, and also to perhaps even open up and learn SketchUp which I downloaded months ago...Look forward to more projects!

Tausha (not verified)

Mon, 10/15/2012 - 20:33

Well it's crooked. LOL Jk I think it is insanely awesome! I hope my first project is even half as good!

alu906

Mon, 07/15/2013 - 10:09

Great beautiful first build! Thank you for this great idea that triggered an idea for myself. Going take this format, and adjust the dimensions to fit as a wine shelf.

DIY Pergola

Submitted by Anonymous (not verified) on Fri, 06/30/2023 - 11:15

I built this pergola in 3 days and added mason jar solar lights.

Vonda Jones

Built from Plan(s)
Weatherly Pergola

DIY Wood Outdoor Chair with Deep Seat Cushion

Submitted by Anonymous (not verified) on Thu, 08/10/2023 - 12:27

Using just basic tools, I was able to build this super comfy outdoor chair for the fraction of the cost. With a couple of modifications, Ana White's design plan made for a perfect fit for the new deep seat cushions I had found on fb marketplace.
 

Blog Link
Simply Marmee
Built from Plan(s)
Essential Wood Outdoor Chair Frame for Deep Seat Cushion
Seasonal And Holiday
Spring
Summer

Farmhouse King Bed Frame

Since developing a love for woodworking I’ve began building things for other people. This particular bed frame I built for a couple who are rebuilding their home after it unfortunately burned down. It’s a beautiful farmhouse home out in the country, and this bed frame fits perfectly in their new home.

Blog Link
https://m.facebook.com/story.php?story_fbid=163507021682162&id=105399090826289
Built from Plan(s)
Farmhouse Bed - Standard King Size
Estimated Cost
$250
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
I used minwax pre-stain to prepare the wood. I then stained it using special walnut by Varathane (got it from The Home Depot). Finally, I finished it using a clear satin polyurethane by Minwax.
Recommended Skill Level
Beginner

Outdoor Pergola with Seating Built-in!

Submitted by Anonymous (not verified) on Sun, 08/27/2023 - 12:14

Pergola outdoor room plans modified to make side seating instead of side tables. Left sides open. Added cute crochet swing bench. Anchored to concrete slab with iron plates and added decorative wood ties that match footing. I've gotten so many compliments and no one believes I made this!

Kristen P.

Built from Plan(s)
Pergola Outdoor Room

Comments

Seasonal And Holiday
Spring
Summer

Kennedy's Christmas Surprise

Submitted by Anonymous (not verified) on Mon, 01/20/2020 - 07:37

My granddaughter had been wanting a loft bed for well over a year. We decided after a year it wasn't just a phase so I went to Ana's website and got the plans. Can't thank you enough Ana! Easy to follow instructions, sturdy finished product and most of all a VERY HAPPY granddaughter! We call that a Win/Win.

Built from Plan(s)
How to Build a Loft Bed
Estimated Cost
$170
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Valspar White
Recommended Skill Level
Beginner

Twin Raised Planter Boxes

Submitted by dave92082 on Sun, 04/29/2012 - 18:46

This is a build of the Raised Planter Box design by Tracy. While it is a fairly simple plan, I would still call it intermediate. One thing to note is that the bottom Cross Supports are listed in her plan as 46" when they need to be 47 1/2 to match the side panels. You can see in the picture above, I laid the incorrectly cut piece on top of the correct one that is screwed in.

Built from Plan(s)
Cedar Fence Picket Raised Planter with Shelf
Raised Planter Box with Bottom Shelf
Estimated Cost
Around $50 each ( a little less not counting hardware)
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Going to prime and paint soon.
Recommended Skill Level
Intermediate

Comments

tracysmith

Sun, 04/29/2012 - 20:34

Thanks Dave for posting the pictures.. I see what you did differently from my plans and I think the way you did it was MUCH better. Congrats on the build, they look great!!! I'm going to rearrange my plans to make the changes and post the correct measurements to reflect that.

Modified L Shaped Desk

This was my first woodworking project in a couple years. I modified the size to make it about 60" on each side. Now that  I am working from home now due to COVID-19 for the foreseeable future this has been perfect to use in order to have two monitors and enough room on the sides for other work. 

Built from Plan(s)
L shaped Double X Desk, Featuring Handmade Haven and The Rustic Barn
Estimated Cost
70
Recommended Skill Level
Beginner

Comments

Deck Chair

Submitted by bigskygirl on Tue, 05/29/2012 - 12:44

I used the plans for the simple outdoor lounge chair and just made the arms wider, the cushions came from Target.............the dog loves it !

Built from Plan(s)
Simple Modern Outdoor Chair
Finish Used
Benjamin Franklin oil based Dragons Breath
Recommended Skill Level
Beginner

Comments

Londons91 (not verified)

Sat, 07/28/2012 - 18:06

My husband and I love to sit outdoors and read with a hot cup of tea. The wide are will be perfect for us. Would you mind sharing the cost of your project?

Camey21

Sun, 09/14/2014 - 22:04

Hi!  I would love to make this patio set but I am having some trouble with cushions. I noticed that Ana stated this chair will use a standard size 20x20 cushion.  On your notes it says you got your cushions at Target, are they 20x20, I love the deep cushions but cant seem to find any that sized. Are yours 20x20, or did you modify you project? If so, what dimensions did you use? Thanks so much!!!

Camey21

Sun, 09/14/2014 - 22:05

Hi!  I would love to make this patio set but I am having some trouble with finding cushions. I noticed that Ana stated this chair will use a standard size 20x20 cushion.  On your notes it says you got your cushions at Target, are they 20x20, I love the deep cushions but cant seem to find any that sized for the bottom ones. Are yours 20x20, or did you modify your project? If so, what dimensions did you use? Thanks so much!!!

Back