Community Brag Posts

I saw this table on Pinterest and knew that I needed to have one in my life. I then bought a saw for my husband, for his birthday, and you can guess what happened. We followed the directions, except we made the table and bench a little longer in order to accomodate more people (I wanted at least 12 people to be able to sit at the same table). This was our first wood-working project and we learned a LOT. It took more time than we anticipated but it was well worth it.

This is a great place to put on shoes and hang up your coat. My husband loves it. You can place your shoes on the shelf under the bench.

First time building furniture. This turned out much better than I thought. After this I probably could've build the farmhouse table myself instead of paying way too much for my wood dining table. Only if I have found Ana's site sooner. :)

Having a Kreg jig also made the whole process much easier.

I built this console over about 2 months. I really wanted a barnwood look so I found this lumber place that sells pine that puts it through a machine and roughs it up on one side. I also added my own saw marks to it, screwdriver dents, rake dents, etc. to rough it up some more. Real barnwood is expensive and often isn't straight, etc. and since I was using this in my kitchen as a countertop I didn't want any spaces in my countertop. This was about a third of the price of barnwood. I wasn't sure how the look of it would turn out, but I think it comes pretty close to looking like the real deal! My husband helped me with the sliding door mechanism. We used pulleys for it and cut metal down to size. We discovered that using a nut and bolt on it didn't work, it just loosened and would come off so instead of using a nut and bolt to secure the pulley to the metal, we used a clevis pin and some washers. Works amazing! This was my first big build and I am very happy with how it turned out! Behind the sliding doors there is one shelf each. We have found there is so much room for storage!

I'm a furniture builder now! This is actually the fourth project built from Ana's plans, but the first one complete and gifted. I bought my materials in the morning, and had it together by late afternoon. Now choosing colors, trim and do-dads to embellish was a whole nuther thing. I opted for chalk paint with a wax finish, and distressed her. She has mirrors on both sides as well as two, double hooks for hats, belts and jewelry.

My grand daughter is one pleased princess. Me too! I'm proud of myself.

Thanks Ana for the terrific instructions, encouragement and education you provide.

We built this dog kennel as a donation to a fundraiser for our favorite dog rescue. It was auctioned off at the silent auction and all the money went to the dogs! :)

We used cheap furring strips for the majority of the project. We also had some leftover beadboard so we used that for the sides & back panel. We painted the base antique white and made a nice top out of some scrap lumber & old hardwood plywood. It took about an afternoon to assemble but another few days to sand and paint. We finished it while all 4 sides were separate to make it easier and it was still a pain to paint. This would be a great project to have a paint sprayer because it is sooo hard to avoid drips with this design.

The whole piece cost us almost nothing to make and we love how it turned out. We need to make ourselves one for our dogs!

The best part of this project was seeing it go home to someone who loves it and all the profits go to the Basset Hound Rescue!

Thanks Ana for the plans we couldn't have done it without you!

My bed frame dimensions were 60 wide by 80 length. So that is the inside demension after assembly. My headboard posts were cut to 54". Headboard panels are 31.5" (11- 6" boards). My posts were made from combining two 2x4s together. I plan on mounting the metal bed frame to the inside of the bed rails.

We are going for a rustic look in our teen sons bedroom. He has some large books that will not fit onto his bookshelf so a pallet wall shelf seemed like a perfect solution.

This project literally took five minutes. If you don't have a sawsall it would probably take around 30 but still pretty quick.

Starting to get colder here in SC. I know the northerners will scoff at me but I'm a wuss when it comes to the cold... and I want my warm garage spot back. That means cleaning up my scrap wood and finishing the big projects that won't fit in my little project/craft room. So the past few weekends I have done a few scrap projects that had been on my mind for a while.

First was shelves for our oddly shaped walk-in-closet. Most of the wood was salvaged from my old dresser/armoir with a splash of scrap whitewood boards to finish it up. I love being able to see everything right when I walk in now.

Second is a simple tie rack for Mr. Lodise so he doesn't have to put them on a coat hanger any more. One more step to getting everything in the closet more visible.

Third is a holder for my hair dryer and straightening iron so they don't have to take up counter space anymore.

Best of all my car now fits in the garage again :)

My husband was able to build this no problem from the provided instructions! We used beadboard over plywood for the headboard and footboard. 

I built this as a place where my husband can store his keys and wallet. This table has nice, clean lines. The simple angles fit with the many pieces of Asian décor that we have.

Followed the plans closely. Used a roman ogee bit to add a decorative edge to the top. Used strap style hinges instead as well.

I haven't decided yet if I am going to use the under portion as storage or not, so I am leaving it unfinished until then. The plan was perfect for my house as the laundry room is relatively small. In order to make sure I didn't have to lift anything major in case the washer/dryer needed cleaning/repair behind them, I modified the plan to include 2 4" static wheels from the Home Depot. I am going to skirt the pedestal later, but needed it framed and functional for the dleivery of the washer dryer. instead of using 4x4 for the uprights, I laminated 2 2x4's and lapped the joints for additional strength. I also made the pedestal 22" total in hieght as I am 6' tall and wanted to minimize bending (spinal surgery 2 years ago)

Even the delivery men were impressed as I was able to pull the pedestal out for them to easily lift the washer and dryer on top of it and slide it back into place. The pedestal is perfectly stable and doesn't move at all during a wash cycle. I still plan on securing it to the walls once the drywall is completed with a pair of L brackets.

My first Ana project- took the spa bench and added doors. Thanks for the easy-to-use plans, Ana. Still learning, though- I ended up buying three sets of hinges before I was happy!