Community Brag Posts

using the gaby kitchen island plan from ana white I built this over 2 weekends, taking my time! We needed a new, larger side wall island for our laptops, phones, junk, etc and we couldnt love it more. The martha stewart drawer pulls add a nice touch and it all came together quite nicely for our purposes. Thanks so much for taking your time to post such great plans!

Coffee Table built from these plans: http://www.ana-white.com/2012/07/plans/rustic-x-coffee-table

Media console built from these plans: http://www.ana-white.com/2015/08/free_plans/grandy-sliding-door-console

We needed a new table for our growing family but didn't want to spend a fortune.
Found this website, explored some plans & fell in love with the Providence table & bench.
It is great!!
We used the Rustoleum stain in Kona as well & did 3 coats of polyurethane. Unfortunately, the table is VERY rough to the touch. And I can see it becoming a problem. We can't wipe it with a damp paper towel as the roughness shreds the paper towel. Any help here would be greatly appreciated!!!
We think sawdust & debris settled on the table when we stained & sealed with the polyurethane. We did not sand in between polyurethane coats either.
If there's an easy fix (or do over) here, please let us know!
Otherwise, it is such a great piece & has already received many compliments!
We'll be sure to refer to Ana White's site!
Thanks so much!!

I made this version of Ana's Reclaimed Soda Crate as Christmas gifts for my kids' teachers. Less than $6 per gift! Full instructions can be found on my blog at www.dropdeadthrifty.com

Variation on the Farmhouse Table plans. Built from knotty pine and finished with Minwax Early American stain.

We made this bed after making the farmhouse bedside tables. So now we have a whole new bedroom set for probably less than $600. We love how it all turned out, and the plans were so easy to follow. We built both projects from Ana's book and plan to build a lot more from it too!

**In the book the plans are for a queen size bed, we modified it to fit our King size**

We added a piece of plywood to the back of the headboard and footboard and stained them so that it would cover all the pocket holes. Also, we extended the very top piece of wood that is on both the head and foot boards so there was a two inch overhang instead of just one.

This bed is so sturdy! I think if a tornado ever blows through we could just hang onto the bed and we wouldn't go anywhere! The side rails also give it a nice finished look even though they just essentially cover the box spring and bed rails. The bed still sits on the metal frame that is bolted into the headboard.

Check out the bedside tables we made to go along with it!
http://ana-white.com/2013/02/farmhouse-bedside-tables-2-toned

I changed a few things and it's not 100% finished, but far enough along for some production to start.  It takes a LOT of dirt to fill this and I only made it 400mm high. 

This is for a full.

This is our very first Ana White project! We are so happy with how it turned out and have definitely been inspired to continue to create. Plans are already in the works for matching end tables, a dining table, and a bookshelf! We used cedar for this table. The stain was MinWax American Walnut, the slight red hue is from the wood only. We finished it with polycrylic because we didn't want any ambering. I think we probably spent about 6 hours doing the actual building A lot of that was spent trying to get the table top boards flush against each other. Any tips for picking straight pieces would be very helpful!! I would suggest cutting and screwing together on the same day do boards don't start to dry out. The rest of the time was really about doing test staining, waiting for coats to dry, etc. We did this in our basement so having water base stains was really key.

Made a few changes to the cuts on the supports as I made a mistake on the mitres.  However, it worked out and added a different look than the plan's design.  (notice pointed mitres on supports)

Wanted to make our friends who were expecting a nice gift that would serve them for many years to come. Used a Kreg Jig (greatest tool ever for amateur carpenter or wood worker!!) for most of the joinery. Wanted it to have a bit of an older look to it.

Table was really fun and difficult to complete.  It took me about 30 hours to complete.  However, it is a real hit in the neighborhood.  I used pine and some of the material was really soft and difficult to sand/finish.  Decided to paint the pedestals chalk white (wife's inspiration), which was a really good choice.  Fitting the center sections of table top to frame was most difficult aspect of project.  Thanks Ana for the inspiration!

Johnny Wilson

Shelbyville, TN

Apothecary Console

My master bath was in desparate need of storage, and as usual, it was Ana's site to the rescue.  I built this Ladder Shelf exactly from Ana's 'Painter's Ladder Shelf' plans.  I built and had it painted in about 2 days.  Now I finally have a place to store towels.  Thanks again, Ana!