Community Brag Posts

I started to build these crates as storage for my oldest daughter's room, but I never got around to finishing a second. Halloween was coming on fast and I had about 8 pallets in my backyard. I debated tearing them apart and building another crate, or using them to create a graveyard.....

The graveyard won, and I ended up doing a picket fence, a casket and headstones with the pallet pieces. The crate fit right in to the decor, so it has now become a halloween decoration instead of a storage solution for my daughter's room. It even got a lid!

My grandchildren needed a table that they could use for blocks, coloring, trains and just all around fun so with the help from my 4 year old and 3 year old Grandson's we created the perfect table from the rustic x coffee table plans.

I used the plans from Michaela's kitchen island, but modified the top. Instead of 2x4s pine studs, I used black walnut boards a friend of mine had lying around. They were ~1x8" boards so I ripped them to ~4" width and ~60" length. They were a little warped so I glued and screwed them togther using a Kreg jig (best tool ever). This made a huge difference and there was only minimal gaps (1/16") between the boards. I ended up borrowing a belt sander from another friend to take out the 1/16"-1/8" lips in the boards. First time using a belt sander and it took a few minutes with 80 grit across the grain to get a level surface. Used 120 grit paper with the grain to smooth out the scratch marks from the 80 grit. Attached the top to the base with screws, finish sanded with 220 and 320 grit, cleaned up the dust with a tack cloth and then applied a few coats of polyurethane. For the drawers, I couldn't find 21" slides so I ended up modifying the drawers for 20" slides. Another fun and satisfying project!

I never thought I would have been able to do this. Thanks Anna! This was my first time building anything. It was a great learning experience. My husband was a big help. He got me comfortable with operating the power tools and assisted me with attaching the posts. This project took a lot longer to put together because I have an extremely active two year old. :-) So I had to do this when pee wee was napping or preoccupied. Originally I wanted to stain the wood Espresso but for some reason I couldn't find Espresso stain sold anywhere in Vegas. I took a swatch down to the local paint shop to have it matched but when the second coat of stain was on the footboard I realized it was not at all the color I had in mind. I had to resand all of it down and the second time around I went with a primer and espresso spray paint. I had a boxspring so instead of making the makeshift boxsprings I found the design in another plan for adding the strip to the sideboards so that slats could be laid down for the boxspring. It turned out amazing! My next project is the farmhouse nightstands. I can't wait!

I decided to build bookshelves on either side of the fireplace, where it was just drywall. I wanted them to be flush with the wall, and the garage is behind the wall. So, I built them into the garage.
I put headers above where the bookshelves would be, and framed the back side in the garage with just 2x4's. I used full sheets of bead board to cover the backs and sides, and tops. Then I bought pre made shelves and put them up using quarter round to support the shelves on all three sides.
I then bought a door frame kit that I liked, that came with fluted pieces for the sides and top with decorative squares to put at the corners. I caulked and painted it all once it was built. I used a circular saw, framing nail gun, compressor, trim nail gun, chop saw and a hammer total. It was a pretty simple project but has made the space much more useable and pretty. My next project is to build a mantle and surround that matches the bookshelves.

This is my build of the sliding door console. I built this for my wife after she insisted we needed this for our dining room. The build overall was pretty easy, after my wife decided to change the paint color 3 times (yes, after we had bought the gallons, and I had it completely painted every time). I will say though that if you plan on painting this then you should use plywood for the front facing boards of the frame. I built mine over the course of about a month and after I had painted it I noticed significant wood shrinkage on the areas where boards came together. Plywood shrinks minimally if any at all so it should take care of that issue.

P.S. Don’t mind the unfinished construction in the background, we are in the process of installing bigger baseboards, and the planked walls are still unfinished.

Picnic table

I took this project on not sure how it would come out and I am very happy with the results!!

I wanted to create a library table (big desk) for my two youngest boys so they would have a craft/homework space. I liked the plan for rustic x console so I adapted it to make this 7 ft desk. Kids love it so much I couldn't even get a picture of it before they started using it.

Enjoyed this project. Already have a request to build a whole set. 

I absolutely love how this turned out! Great plans! I used a lot of old wood my grandfather had so this project was extra special. 

11' Rustic Farm Table made out of 2" rough cut pine. Used a couple different plans from here and just kinda made it work to fit the space. Used a power sander to add some character and to smooth it out and wear it down in spots. Some of the wood wasn't as bluish gray, so I soaked steel wool in white vinegar and brushed it on, seemed to help a bit, especially on the fresh cuts.

I had so much fun doing the prototype of the pirate’s treasure trunk, I built another one today! It was a super-fast build, and I did some things differently today which really speeded up the finishing process.

The first difference on this one is the use of the ½” x 2 ½” angle. It’s the next size larger than the one from yesterday. Instead of using the screws that came with it, I used some 1 ¼” Kreg screws. The hardware and screws are painted with some gloss black paint. I think it made for a sturdier hinge, so I’ll be doing them that way from now on. I also made a little “gasket” out of felt to go behind the bracket at the bottom where the pivot screw is attached. I’m hoping this will protect from friction over time.

For the finish, I started it with the gray wash just like the original. For the walnut glaze, instead of mixing the Minwax Express Color with mixing glaze, I just diluted it with some water. This dried much faster, but it gave the same look. I added 2 coats of Minwax oil modified water based poly before attaching the hardware. I still used the super glue before attaching with the furniture nails, but skipped the mod podge step, and just went over the hardware and keyhole with an artist’s brush and some poly.

All the wood was scrap and the finishing materials were left over from other projects. I bought the corner brackets and the larger angle brackets this morning at Ace for $7.50. These pieces cost a little more than Lowe’s, but Ace was closer so it saved me a trip.

There's another one of these in work (a lady’s trunk) which I will post later.

I built this Fancy Hall Tree with cherry hardwood and cherry plywood. The lower bench is done with rabbet joints and dados instead of pocket hold screws but the upper portion is all pocket hole screwed together but instead of laminating a large piece of plywood tot he back I cut individual panels and dropped them into rabbets like a picture in a frame.  The supporting wings are connected to the base and the back panel with pocket screws as is the panel to the base.

For years I have wanted a dining room table with benches and after searching the net for plans for my husband to make it happen, I found Ana's site and knew that it was a possibility to build it and that it didn't have to be a project only for my husband. My husband built the table and my first build was the benches. My husband found a couple of wrought iron balusters that he used at supports on the table legs. We used 2 x instead of 1x which gave it a much bulkier look.

I had an old bookshelf in the garage.....wobbly and just not having any justice. I took it apart and turned it into a play kitchen. Used the plans and modified to what wood I had available from the shelves.

my second Projects))))

This project was fun. The hardest part was trying to find barn door hardware. I did end up finding one on amazon but it was still too long and had to cut it down. Very doable in a weekend.