Community Brag Posts

This took about a week to complete.  I modify the original plan to include "built in" dressers and a night stand type of dresser.  The night stand has shelves built on the side.     Two beds were built of different configurations.  

We modified the plan and made many changes along the way and here’s our finished island. We’re thrilled!

I built a smaller version..THank you so much Ana for the plan. This one is only 2 ft tall and 22.5 inches wide..Perfect size for my 2 year old.
I added a hook to hang my daughter's doodle and on the other side, I added an aluminum tin(wrapped in a scrapbook paper sealed with mod podge) so she can put her magnetic letters/numbers on there. Added this little crayon holder as well. :-)

The ongoing saga of our cruddy old kitchen is finally over, for the most part. We attempted the quick fix and failed and now with a little time, knowledge and cash we think we finally got it right. Our ceilings are lower than the average house so we couldn't buy stock cabinets. We custom made everything and added some accessories. All thanks to Ana-White!! You are so awesome!!

For more photos etc... just visit:

http://buckleyjournal.blogspot.com/2013/07/kitchen-reno-redo-20.html

Built this from Ana's plans over a weekend and spent a few nights painting/staining/finishing. We decided to use a true quarter sawn red oak for the top. This is not a cheap wood (~$180) for the top alone, but I wanted it to be solid and thick. It is extremely hard so you will not want to use this if you don't have the necessary tools, like a table saw. It is usually purchased rough cut, which means the width can range in size by inches. You will need the table saw with a sharp blade in order to cut it down to matching widths. For the stain we used a General Finishers gel stain in Java from Woodcraft. That was followed with a General Finishers Gel topcoat. This is an excellent topcoat as we have 0 scratches in almost 6 months of regular use. My wife painted the base in a Cream Puff color from Behr I believe with a dark stain glaze, followed by a wax coat. This is a solid table that cost a fraction of what this would be in the stores. Most of our friends think we bought it! Thanks Ana! 

Thanks for another great plan! We wanted to replace our King sleigh bed with a Panel Headbord to free up some room in our master. Off to Pinterest I went to find a picture of what I wanted Hubby to build. I was excited to find that Ana-White had tackled this project because I knew there would be a great, well written plan to follow!

When I first found Ana's site, I fell in love with this project. I knew it was one I had to 'work up to'. I got a few projects under my belt and then I tackled this one. I am so pleased with how it turned out. No, it isn't perfect...but I made it :) Thanks for the great plans and inspiration Ana!!!

They were simple to make and the plan was easy to follow. The only modification I made was adding the 1x3 topper in place of the longer legs sticking out of the top.

This was my first woodworking project. 

Followed Ana’s plans except added custom bottom rail for door stability and handles to guide the doors. Top rail was made rather than purchased.

This was my first project I did this many months back and I have just now started to put up brags after getting into building furniture for about 8 months now. This project was much easier than I expected and I did the build out in about two hours. When I did this project all that I had tool wise was a mitre saw, a drill, and a tape measure so if you want a project that uses minimal tools this one would be a great one to start with! I think that I spent around $125 on this bedside table and that number is a little bit higher because I used all premium wood because it was my first project. I stained it with Jacobean oil based stain and then I used the polycrylic finish (both by minwax) which turned out great I think!

We wanted to transition our two year old out of the crib and skip the toddler bed and this worked perfectly. 

I made the cuts over a lunch hour and assembled in one night. 

If you have never used a pocket jig, just practice on a piece of scrap. Also make sure you consider how you will attach the rails before beginning. Depending on what you use you may want to make the headboard more narrow to accommodate for the rails not being flush with the insides of the posts. 

I made steps out of the scraps from the outer rails and the slats. Our little guy loves it!

Built from full size bed plans from Jen Woodhouse. Very happy how this turned out. 

This has to be one of our favorite Ana projects so far! And our first using the Kreg Jig - which I now love!
Much to the dismay of the neighbor kids next door - it's not a candy stand. Nope, for now it's destined to be my little red potting bench.

My son wanted a bigger bed so when his friends and cousins sleep over they dont have to squeeze into his twin. My son is 12 by the way, so when I got a king I gave him my queen. I needed to raise it up because I knew I wanted to build a trundle to put under it. This bed is pretty heavy, very sturdy (even with 5 kids sleeping on it or jumping on it) I took the idea from my Malm bed from ikea but its a lot heavier and stronger

After moving to our new home, we needed an entertainment center to house our TV. I had build a DVD/Bookcase several years ago and I wanted the entertainment center to match design-wise. I was amazed how similar the Smith Media Wall is to the bookcase I built years ago--simple, clean lines with the moulding along the top.

I adjusted the plan to fit our TV and went with one cabinet door on each side instead of two. I also used some leftover beadboard for the cabinet panel inserts. I broke the first rule of carpentry and in a rush to finish, mismeasured the side hutch in comparison to the side base cabinet. (I actually had the correct measurements, I just made a calculation error when reading the plans I quickly drew up. Usually, I'm meticulous with plans, but with so many projects to do, I rushed these plans and hopefully learned from my mistake)