Community Brag Posts

Made with love in the dead of winter

Submitted by Anonymous (not verified) on Tue, 10/18/2016 - 19:20

This the is first time I have ever built a peice of furniture.  My best friend made all of her furniture in her house using her kreg jig and visiting Ana's website.  I ended up building this in her garage since I was still in an apartment at the time.  It was a total labor of coldy freezing love.  :D  Now I want to build EVERYTHING!  We had to adjust some of the numbers on the plan and it cost a little more than $75 but totally worth it!

Built from Plan(s)
Estimated Cost
$75+
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Cabot Interior Wood Stain - Base Dark Walnut and Top Midnight
Recommended Skill Level
Beginner

A patio-sized picnic table with detached benches

Submitted by Emillie on Thu, 07/16/2020 - 10:43

We needed a long and narrow table for a patio, so we designed a table to fit! This simple Trussel table is made out of constructional lumber for an affordable outdoor dining option. Small enough for our tiny patio and large enough to comfortable seat 6, it is the perfect table!

Estimated Cost
$80
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Benjamin Moore Semi-transparent stain (Fresh Brew) and varnish.
Recommended Skill Level
Beginner

Collapsible Table for Craft Fairs

Submitted by Anonymous (not verified) on Mon, 06/03/2024 - 08:58

My wife wanted a collapsible table for her craft fair sales. I put a wooden dowel in the opening for her to drape packing paper over and hooks on the sides for gift bags. Easy plans to follow and it turned out great!

Todd Martens

Built from Plan(s)

my new coffee table

Submitted by danolenar on Mon, 09/17/2012 - 23:39

i used the a modified rustic x coffee table plan. i did not use the x and used kiln dried 2x4s for most everything except the bottom shelf i used 2 1x12x4 because they are $6.50 each compared to $20-25 each for 8ft and i cut the 2x2 out of the kiln dried 2x4s there was a fair amount of waste but the kiln dried 2x4s are much nicer to work with then green 2x6s.i stained in a red mahogany stain and gloss brushing lacquer. The top took 8 2x4s cut to just shy of 48" do i could get two from each piece. i shorted the table frame to match. if you are using green wood like i did on my first table the rustic x console table you will notice cracks forming in knots especially. using kiln dried lumber is recommended to ensure your project will last.

Built from Plan(s)
Estimated Cost
$38
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
red mahogany and gloss lacquer
Recommended Skill Level
Intermediate

Sewing Desk: From Plain Pine to Antiqued Blue

This desk was originally my great aunt's sewing desk. After 47 years it's been passed down to me. I decided to paint it blue with a chalkboard paint top. I antiqued it using my little sander and some Minwax Red Mahogany stain. I spray painted the drawer pulls to update them and finished everything with Minwax Furniture Wax on the blue and chalk on the chalkboard finish. Now I just need to get up and sew.

Estimated Cost
$15
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Zinsser Bull's Eye Primer, Valspar paint, Minwax Stain and Furniture Wax
Recommended Skill Level
Intermediate

Easy, Economical Garage Shelving from 2x4s

Submitted by Anonymous (not verified) on Sat, 10/22/2016 - 09:07

We needed some more storage in our basement so I made these shelves.  They are 10 feet long.  I couldn't get the 10 foot long 2x4s into the basement through the house, so my husband helped me slide each board through a tiny window one at a time.  I also decided to paint the shelves to make them look nicer since they are in the finished part of our basement.  Overall, I think they turned out great and they can hold a lot more than I expected.     

Estimated Cost
$150
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Glidden Gel Paint - Antique White
Recommended Skill Level
Beginner

Comments

Farmhouse Table - No Pocket Holes Plan

Submitted by mcronin on Sun, 07/19/2020 - 07:48

The published plans for this were great. This was my first attempt at a project like this. I have always liked the idea of dining at a large table outdoors and the farmer's style is appealing to me. I adjusted the length to fit my deck, but also made a few changes for aesthetic purposes. I notched 4x4s rather than join a pair of 2x4s for the legs. Added caps to the screw holes rather than filler and used pegs to secure the top planks in addition to screws from the bottom. The frame and top were stained/sealed with Cabot Australian Timber Oil.

Estimated Cost
$200.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Cabot Australian Timber Oil, Natural
Recommended Skill Level
Intermediate

DIY Little Kids Picnic Table

Submitted by Anonymous (not verified) on Fri, 06/07/2024 - 07:27

When I built the little kids picnic table, I substituted 1x4 lumber, except for the top slats, the seats and the cross supports. The measurements needed to be adjusted of course. It was a fun project to build. The plans were clear and easy to follow.

Rick

Built from Plan(s)
Seasonal And Holiday

Daybed- Our First Project

Submitted by chowie on Wed, 09/19/2012 - 13:52

This was my and my husband's first project and it was easier than expected. There were slight imperfections with the drawers, but they were hidden by the faces and trim. It was our first time using a Kreg jig and we LOVED it!! We will be building furniture for Christmas presents this year, we are hooked!! The project took one weekend to build, and we spent around 4-5 hours a day.... remember we are newbies so we had to refer to the plan ... a lot! We went with the plywood top and it is sturdy and we can't wait to paint it and get it looking like a finished product. My husband was testing the daybed sans mattress.

Estimated Cost
$150 including hardware
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Gloss Valspar paint in white, with minwax poly acrylic in semi-gloss.
Recommended Skill Level
Beginner

Comments

bhoppy

Mon, 09/24/2012 - 07:15

This looks great! I can't believe it was your first project!

Rustic X Coffee Table

Submitted by chulmer on Fri, 07/18/2014 - 11:33

Easy and fun plan for a great looking coffee table. I changed the top a bit by adding two 2x2's and a 1x3 in the center, the five 2x6's looked a little plain to me. I also added an X in the front, I don't know why but really I really like it, almost gives it an open storage feel. The strain is "weathered gray" by rust oleum.

Recommended Skill Level
Beginner

Comments

Sofa Table with Granite Top

Submitted by Redleg189 on Tue, 10/25/2016 - 11:49

Built using the Simple, Cheap znd Easy Console Table Plan. I utilized a scrap piece of granite for the top that I cut to size and polished and poplar wood that I had laying around the shop.

Estimated Cost
$40.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Valspar red antique paint and finishing wax
Recommended Skill Level
Intermediate

Tall Wedding Planters

Submitted by swhitead on Mon, 07/20/2020 - 10:14

Made the planters to hold flowers for a small garden wedding. Used 3-1/2" wide fence boards as my HD was out of standard 5-1/2" boards. Used 11 boards for finished height of 38" top was 18" wide, bottom 12-1/2" using a 4° angle. Ripped fence boards to size to use in place of 1x2/1x3 boards. Added center trim as on another brag post, as well as, framed the top to finish off the planter.

Built from Plan(s)
Estimated Cost
$20 each
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
None
Recommended Skill Level
Intermediate

Comments

Heavy Duty Bed

Submitted by Anonymous (not verified) on Sat, 06/08/2024 - 09:27

I wanted a heavy duty spare room bed but didn’t want to pay a mint… so I built one.

RosieOh

Built from Plan(s)

Cyndi Console Table

Submitted by handydaddy on Sun, 09/23/2012 - 18:41

Here is my version of the Cyndi Console Table. Made from poplar with oak backing. Took me about a week working on it in the evenings.

Estimated Cost
$150
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Stained with a custom Sherwin Williams stain and a minwax poly on top.
Recommended Skill Level
Advanced

Comments

Rustic X Kitchen Island -modified

Submitted by MaryMurray on Sun, 07/20/2014 - 10:24

I made this rolling kitchen island out of pine using plans found on Ana White's website. For the top I wanted to do something different. I found a tub of wooden blocks in the storeroom; they belonged to my husband's grandfather.

The blocks were made out of all different kinds of wood. I used a plywood base and simply glued them on then added a pine edge. I love the way it looks!

The back is open halfway so that when it is pulled out it can be used as a desk or small table.

The stool is from Ana White as well.

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Special walnut
Recommended Skill Level
Intermediate

Fancy hall tree

Submitted by Anonymous (not verified) on Fri, 10/28/2016 - 11:06

This was the biggest project I had ever built at the time. I was so happy with how it turned out!! 

Built from Plan(s)
Estimated Cost
$100
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Beginner

8 Foot Picnic Table

Submitted by milleall on Wed, 07/22/2020 - 12:07

My teenage son and his father took over the bulk of the building duties this time. We chose to use treated lumber as untreated lumber with finish applied doesn't do well in Michigan weather in my experience. We made it more beautiful by using the treated lumber in cedartone. We used pocket holes to attach the top and seats to the supports to make for a smooth appearance. This is one large and heavy table! The plans were accurate and the build was fairly simple, but having many hands made working with the large piece easier.

Built from Plan(s)
Estimated Cost
$150
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
None
Recommended Skill Level
Intermediate

Comments

Seasonal And Holiday

Danielle's Tab-top Curtains

Submitted by zigmommy on Tue, 09/25/2012 - 22:24

I just swooned when Ana posted her Tab-top curtain tutorial! I decided right then and there I'd be tackling all of the window treatment-less windows in my new home using her instructions. I'm no whiz on the sewing machine but I couldn't be happier with the way my curtains turned out!! No joke, if I can do this, so can you!!

I made the green shelf in my living room all by myself a couple years ago from Ana's Painter's Ladder Shelf plans. :-) It used to be red but I refinished it to match the decorating scheme in my new house. I love how everywhere you look in my home you see some piece of furniture or project that came about as a direct result of finding and embracing Ana's DIY spirit!! My curtains are no exception. :-)

I've made the curtains for my living room and my bedroom, and I just started the set for my boys' bedroom tonight. I've gotten better with each set, and this third time around I'm pretty confident in what I'm doing. Lucky for my kids, they're going to get the best set, lol!

I'd already been agonizing over what to do for curtains in my bedroom and I fell instantly in love with the fabric Ana used for hers. I already had bedroom linens that would match perfectly so I went ahead and snagged a few yards. All three of the fabrics I've used have been in the Waverly Home Decor line. The patterns are fun and modern, the price is right, the quality is great and I've always been able to find the perfect design. I usually buy from Fabric.com as it tends to be cheaper once you search for readily available online coupons.

I've really enjoyed making my window treatments! I get to have exactly what I want, in a better quality for a better price than I would ever be able to find in a store. It takes me about a day to finish a set (or at least the first two did) and I have relished the excuse to watch girly movies or listen to music while I get these babies sewn. I've had my first two sets done for 4 & 6 months respectively and they still bring me such joy every day.....give it a try, you wont regret it!!

Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Beginner

Comments

marypoynter

Thu, 10/17/2013 - 01:14

Its better to have a window blinds than curtains when your window is made of glass but anyway its a nice bedroom of Danielle.

Rustic x coffee table and rustic x console table

Submitted by Anonymous (not verified) on Fri, 07/24/2020 - 10:31

Made exactly as according to Ana Whites plans. Easy to build and very pretty once completed

Estimated Cost
180
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Espresso with varathane and lacquer on top and base is a light blue stain
Recommended Skill Level
Beginner
Back