Community Brag Posts

I am so excited to have my son see this on Christmas morning. I decided to build in the bottom shelf for more tool storage and I am considering drilling some holes in the sides of the top shelf or the back for hammering in "nails" (or clothespins painted grey). This was my first project without any man-help and I can't wait to get started on the next one! Thank you so much Ana for your designs and more importantly, your inspiration.

We followed the plans closely, and it turned out well for the first project. It was the perfect size for what we needed! My husband had never built anything like this before and after a little research on how to use the kreg jig, he was able to finish it in a weekend.

This was my first bedstand build, and I was pleased with how they turned out! A possible recommendation might be to make your own 2x2's if you have the means, I looked everywhere around here and could only find firring strips. These look ok after a good bit of sanding, but the huge radius edges make for some funny looking joints, and they're super inconsistent dimensionally - like off by 1/8" smallest to biggest, which can make issues with fitting drawers. Another option would be to build the base frame, then make the drawers once it's all together and modify dimensions slightly to match. I would also note to make sure your drawer bottoms are flush with the outside of the drawer side to side, and not slightly bigger at all, it made for pretty a pretty tight fit for the drawers to make it in. Squareness was paid extra attention thanks to all of the good comments on these plans, and I didn't seem to have any issue with drawers fitting as a result, just a bit snug. I would suggest using 1x4 for the drawer frames for two reasons: The first is that the drawers are pretty shallow, and there's plenty of room to use 1x4 instead of the 1x3. The second was the alignment of the drawer pulls and the top of the drawer box frame. Mine ended up right on the border of the drawer box frame in order to get the drawer pull centered. This was a problem as I had to grind off the edge of the interior box frame to get the screw to fit. If you had a 1x4, you could just countersink it without any issues, since it wouldn't be right on the edge of the drawer box. Overall awesome project, and great plans! Thanks Ana!

Simple x bench followed the plans posted below except I shortened it to fit our old table.

We had so much fun making this sofa and chair for our daughter as a last minute Christmas gift. It went together quickly and we are so pleased with the end result. Thanks for sharing your plans just in time for a last minute gift. My daughter was so pleased!

For these beds I modified the original farmhouse doll bed plans to accommodate a few more dolls. In the process, I discovered that, while doll furniture turns out SUPER cute, it takes me about the same amount of time to build a little piece as it does to build a big piece, especially when you consider the time it takes to sew the bedding.

I put these together mostly with nails and glue, but used my kreg jig to join the rails to the headboards and footboards.

I needed some new chairs for my kids play room as the ones that came with a table they received as a gift were cheap and I had reinforced them three different times.

I liked the simple design of them and the cost is right! Mine were a little more as I used 2x2's for the legs and made the body of the chair double-braced as my boys are hard on things!!

My boys picked the colors, which the blue was left over from a room and the red from my older son's desk!

Loved this project!

I made these for my two nieces and soon to be born daughter for Xmas. I used 1" hobby foam for the mattress.

I used Ana's sawhorse plans and painted the sawhorses black. I made up a plan for the desk top inspired by some of the farmhouse table plans. The top looks very thick and chunky, but is mostly made from cheap 1x6 boards put together with glue and pocket holes. The ends of the top are made from 2x2 boards attached with pocket holes. The sides are from 1x2 boards - all attached with glue and pocket holes.

For the finish I used a water based stain from General Finishes - Black Cherry. I started with one coat of poly-acrylic and did not like the look. I sanded it back and bit (distressing the edges a bit) and put on two coats of wax.

Hand painted baby changing station with interchangeable shelves or hampers. Can grow with child into dresser or entertainment center.

I built this for my little girl for Christmas. I think it is one of the cutest $20 presents I have ever gotten her.
Thanks to my sister in law who made the bedding. I also placed felt squares on each corner to make sliding the drawer out of the wood floor a breeze.

I started with the doll farmhouse bed. Someone made a super cute version as a dog bed- and I loved it as a mini sofa...