Guitar Stand
![](/sites/default/files/Guitar%20stand%201.jpg)
Built this guitar stand basically by using on-hand materials left over from another project. Used 1x12's; 18" tall fir for sides and back braces (cut at 5 degrees on each side). Added felt strips to protect the instrument.
![](/sites/default/files/Guitar%20stand%202.jpg)
![](/sites/default/files/Guitar%20stand%203.jpg)
Built this guitar stand basically by using on-hand materials left over from another project. Used 1x12's; 18" tall fir for sides and back braces (cut at 5 degrees on each side). Added felt strips to protect the instrument.
Absolutely love how this table turned out! So much fun building it with my daughter and teaching her how much fun it is to hold things!
I used cedar left over from a bar my husband made in our kitchen. I didn't have to purchase any materials as I used his left over pieces.
I didn't like my ledges with the back board, and I wasn't too keen on making the key holes. Instead of 24 inches I made my shleves 1 ft. long. I also laid the spacers so that the distance between the top and bottom of the ledge was less than the plan called for. This allowed me to attach a wooden strip (7.5 x 1.5 cut from the cedar 1x4 that I ripped on the table saw) to the wall that the barn beam shelf slips onto and anchors the ledges instead of using the key hole hanger.
This coffee table was my first build. Its a blend of mulitple coffee table designs by Ana White.
This was made using your plans as a start.
The client wanted extra long , and adjustable shelves. It's almost done.
I had to modify the drawers a little because they wanted more under storage, and I had a tough time with the flush drawers , so I slightly modified that as well. So thanks for my first advance build :)
Built the benchright table with a few modifications. Finding straight or even somewhat straight 2x2's is near impossible so I used top choice 2x4s. I used a chain and a turnbuckle instead of the black iron pipe. I painted the hardware with copper spray paint. The stain is ebony miniwax water based stain. Let me know what you think, I'm open to suggestions.
Fri, 02/01/2013 - 19:44
The ends drop slightly, it's agrivating me to no end. I'll fix it.
Fri, 02/01/2013 - 23:37
Looks great. I love the copper, wouldn't match my wifes decor/color scheme but it looks awesome. Amazing job
I made this one huge! It is 6 feet by 6 feet. I handpainted the birds, and I used Ana's technique for painting on the letters.
Wed, 12/23/2015 - 11:47
How amazingly gorgeous is this?!? Great job, I can't believe I didn't see this sooner. Love the huge size in your room!
I used 2x2s for the base and stained them ebony. The top is made of 2x6s stained weathered oak & dark walnut. Caution: no matter how perfectly square your base is, if your top is even remotely warped/twisted, it will pull the whole thing out of whack. The base is not strong enough to fight the 2x6s.
Made this for my little ones. They loved it! Merry Christmas!! <3
My grandson loves Lego's. So for his birthday I built him a Lego table. The top is reversible so it can be used for other activities when not playing with Lego's. It also has 6 storage bin's that slide out. I also built a stool that looks like a Lego. It has storage and it's on wheels.
Mon, 03/09/2020 - 17:09
Love the design with the storage bins for easy storage.
We used the plans for the Fancy X Farmhouse Table and made some modifications to fit our space. Our first mod was to make it only 65 in long ... which meant the angled pieces in the middle aren't there any longer as it would have been too busy. The second mod we made was anywhere it stated to put 2 2x4s together we replaced it with Douglas Fir 4x4 (found at our Orange store).
We remodeled our house and now had a new 9x6 master closet to fill. During construction I saw this design on ana-white.com and liked the style, but wanted to customize the layout. I found an online closet designer and played around until I found something my wife and I liked. We ended up with a 9 foot long his/hers double hanging on the ends and a long hanging section in the middle. And on the other side 8 feet of shelving (leaving about a foot for other storage).
I bought the pipe as a 10 foot pipe to be cut and threaded (for free by the store). I did have to change the design a little because the store cannot thread pipe less than 14 inches. So I ended up replacing the short pipes and T's with 2x4s. That made it a little cheaper and I still like the end result.
We stained all the wood using Minwax "Early American". This probably accounts for most of the build time.
Then I put together the supports and brought them into the closet to add all the pipes and slats. I started with the wall for hanging. And later did the shelving.
Here's another forum with more pictures of this project:
http://woodworking.formeremortals.net/me-mo-community/#/discussion/866/…
I followed the plans exactly, and added the headboard at my daughter's request. My brother recently tore down an old fence, and I pulled this gate out from under a brush pile. I strengthened it with lots of screws and cut each side to bring it down to the same width as the bed. The whole project cost me somewhere around $150-160 because I literally had nothing but a drill. I had to buy everything from screws to nails to wood conditioner, etc. Not bad for a truly "from-scratch" project.
Thu, 02/07/2013 - 22:23
Beautifully done! And a real bargain at that price, even if you did have to buy just about everything.
This was my second-built project after finding Ana's wonderful site - the first being the Rustic-X coffee table. After learning how to use a miter saw, jig saw and kreg pocket hole jig for the first time by watching Ana's video tutorials as well as several others available on the web, I built up the confidence to attempt a media console for my three video-gaming boys.
I pieced together a design plan for the console using the general design of Ana's Apothecary Console Plan, together with the incredibly helpful plans and instructions detailed on 2Crafty4myskirt.blogspot.com. Kind of like mixing together pieces of different recipes, I was able to create a design that had the length of Ana's console, plus 2Crafty's wonderfull side-storage doors for all of the boy's video games.
As set forth in detail below, I used Ralph Lauren's Carbon paint for the entire unit, and Minwax Red Chesnut Wood finish to distress the edges. I used Pecan Minwax Polyshades Stain & Polurethane for the table top. One of the most helpful pieces of advice from 2Crafty was to leave attachment of the back and top of the unit until they are separately painted and stained.
I finished the false fronts with antique copper (bronze) cabinet label holders (2 1/2") which I purchased online at D. Lawless Hardware online.
As a beginner, I had a steep learning curve in learning how the tools worked (safely), and so it took me about 40 hours all in to finish the project. While my sons helped along the way, my husband didn't actually set eyes on the project until it was complete. He was stunned at how beautiful it was - and that I had in fact created what he calls the "center-piece" of our family room from a pile of lumber purchased at Home Depot. He is full of helpful suggestions of what I should make next!
Thank you Ana for providing me with the tools, skills and confidence to produce a piece of furniture that I am very proud to point to and say "I did that!"
We were given this fireplace insert and need something to house it. After searching the web, we decided that Ana's faux fireplace design was our best option. We modified the measurements to fit our needs and added a wood stained top to serve as our "mantle". We are thrilled with how it turned it!
My daughter had been asking for a loft bed that she could place a futon under. This plan was exactly what I needed! I made the bed taller so she would be able to stand under it (we have 10’ ceilings - old house). And, I replaced the ladder with a staircase with built-in cubbies.
This was our first project of 2020 and we started it during the first part of the quarantine, so it got named “Project COVID-19.”
Sat, 01/09/2021 - 09:49
Great mods making it higher and the stairs look great too! Thanks for sharing:)
Ana's $10 ledges. In Colorado, they cost just a couple bucks more at $13. Thank you, Ana, for helping me see just how easy these shelfs really are!
This is a miniature version of the Man Crate, measuring 6” x 6” x 4 ¾” tall, made from 1/2" and 1/4" scrap birch plywood, with added hinges to make a lift-up top.
This is going to be a gift - - I’m going to send it filled with candy.
The girls and I are all in! We just started our build for the Playhouse Loft Bed. Wish us luck!
AlphaPilot
Thu, 04/06/2017 - 07:29
We finally finished our project and the girls are enjoying it!
Redrew plans to accommodate an approx 1/2 sized Benchwright Coffee Table. Decided to make it slightly less farmhousey in style. Used poplar for the carcass and hickory for the shelf - 3/4 inch -and table top -1 1/2 inch. 1 1/2 inch was really too thick for the top, it looked too chunky so had to deceive the eye by making a 1/2 inch roundover on the top and a 45 degree bevel on the under edge. I do not recommend using hickory, it’s a heavy, difficult wood to work unless you are an experienced woodworker (I am not!) with good sharp tools and not to mention expensive! The table top caused me all sorts of grief.
Comments
dmcpheters
Thu, 05/28/2020 - 17:37
Very nice and well designed…
Very nice and well designed. Thanks for some ideas!