Reclaimed Wood End Table
I've taken quite a bit of time building this project. My goal was to use all material we had here so, I had to cut down 2x4's and 1x6 tongue and groove. I am proud of how this turned out, now to build it's match.
I've taken quite a bit of time building this project. My goal was to use all material we had here so, I had to cut down 2x4's and 1x6 tongue and groove. I am proud of how this turned out, now to build it's match.
I started with Michaela's Kitchen Island plan, but reduced the dimensions and material sizes. I used 2x2s for the legs and 1x3s for the rest of the project. Everything was kreg jigged together. This project would've taken less time but the drying time for the stains ate up work time! :)
My version of the rustic rolling kitchen island. Really can't do the x's yet. It's all leftover wood and counter top. I use my other one similar to this as a coffee station.
Made by my husband.
Mon, 09/26/2011 - 01:21
Love this! I also want to build this headboard and finish it in a bright white. One question- how did you secure it? Is it in any way attached to the wall or the bed frame or is it just leaning there? Thanks, and great job!
On this project we modified a few things like the arm rests which we cut at an angle to keep kids from pinching fingers in there if someone decided to move the bench back on them. We also modified the size which we made 6'x4' to maximize play sand space and kid space. Therefore this made our benches bigger so that big kids (my husband) could sit on the benches and play in the sandbox. Yes there was talk about putting cup holders but I won the conversation by mentioning sand in his drink and we would have to do a sippy cup. We notched out the handles instead of installing handles which made it look sleek. We used the template from the hinge so it matched the shape....clever huh? We decided to primer and paint this one sandstone in the brick and mortar sample book by Behr and had them put it in an exterior paint color for us. We used a wagner paint sprayer which made the project fast at the end. Overall still an easy project for anyone. I do suggest pre drilling all holes first before screwing in screws so the wood doesn't split when doing the slats on the top.
Wed, 04/08/2015 - 12:41
I was wanting to make a big one like a 6ft by 6 ft and was wondering how long you made everything.
My Second DIY project! It turned out PERFECT :)
Mon, 12/14/2015 - 11:34
Well done, It looks terrific! I like the stain color very much.
This project was simple and my husband didn’t have any issues following the plan. We did have to use an extra 2x4, because we didn’t cut the long pieces first. Cut the long pieces first, use the end pieces to make the smaller ones. :)
A farmhouse table I built based on one of your inspiration projects! All by hand and chiseled myself 😍
Thu, 12/29/2022 - 11:13
Thank you for sharing, such a beautiful handmade piece!
Using this plan I built my lounger with some changes, mainly adding lawn mower wheels to one end. The cushions I made have a mesh bottom to let the cushions dry faster, and zippers so they can be removed and machine washed. More details on what I used and many more photos on my blog.
Tue, 09/20/2011 - 12:49
I love the idea of the mesh! It would work as a great bench when you need more seating too. I think it'd be nice with huge wooden wheels also.
I made this bench for a friend who had a very specific space that needed a bench. I had to make it so that there was about 30 inches of length on top but with enough room on the inside of the cubbies for 10-11 inch baskets but also had to make it so there wasn't enough space for a dog to get its head into the baskets when they were put into the cubbies. So it took some thinking with the math, but ultimately, I think they turned out great and the 10 inch baskets she bought work perfectly. I made the legs with 1x3s instead of 1x2s for extra support (and that's also what I had in my scrap pile). I left it unstained because my friend is going to do that part. This took about 3 hours to plan and build. I used the kreg jig to hide pocket holes to attach the legs to the top and bottom and also to attach the inside divider to the top of the bench (I used nails to attach the inside divider to the bottom).
Used 2x4s for the top instead of 2x6s. All the shelves are 1x2s. My first attempt at a door and drawer - it kicked my a**!
Top stain: Minwax Golden Pecan
Then Minwax Polycrylic 3 coats
Adjusted the dimensions to make it smaller. I used scrap plywood and mdf for the base. I used oak for the top. I routed the top instead of using edge trim. I added a USB charging outlet on the table top that plugs into an outlet.
I built this tall farm table for his new home. They love it and now need to get more furniture which I will over time build for him. Therefore, more to come.... I love your plans and keep them coming.
My DH and I built this using the side tower plan. It was about $50 in materials, including the birch 1/4" plywood we used for the back. We made it 48" tall and 24" wide. I finished it with a charcoal grey water based Minwax stain, and then sanded that out to bring out the wood grain more. I topped it with two coats of wipe on poly, also by Minwax. It was not too hard to build and was pretty fun actually. I am just glad that it actually looks like a piece of furniture and not some boards screwed together. I kind of want to do one with red stain now to make it look like barnwood, hmmm...
This is my latest project and my first project post on my new blog. I've included some step-by-step photos on my blog. I'm using this kitchen island as a craft cart in my craft room. This project was so fun and easy to put together. I love how it turned out!
Wed, 10/02/2013 - 06:52
We have a small house and my craft closet shares space with well other household stuff. :( My sewing table is the computer table when my self employed husband doesn't need to work. Your work has give me a great idea for a roll away craft table. Something like this could really work for me. Thanks for posting it, and good work!
Thu, 10/31/2013 - 19:10
I'm in the middle of making one of these also. I had to shorten by 4" so it will fit where I need it to go. I love the color you used. I might need to try that with a dark stained top.
I made these two tables for a coworker who lost her home in the Valley Fire in California in 2015. She only had owned her home for 71 days and she lost everything. So, I thought I could make her some furniture as a very small token. They took me just half a day to build. I love this hobby.
Tue, 12/22/2015 - 05:57
Your co worker is very lucky to have a friend that will go above and beyond to help them. You do beautiful work.
Wed, 12/23/2015 - 05:34
I agree with the above comment. These are beautifully made, and a very thoughtful gift for your friend.
All pine stock from Home Depot. I had to mill some ofvthec2 x 6s to get straight edges for the top. Dark walnut stain. 3 coats varathane. Came out great! Thanks for the plans Ana!
I modified the plans for the farmhouse hall tree to build this for our entryway. The farmhouse hall tree was a perfect base plan for this project! We went from a mess of jammed in jackets and piles of shoes to a clean and organized entrance! Thank you so much for providing the original plans! We love this!
This is absolutely the first thing that I've built and I have the bug now. Having been recently laid off, this project peaked my interest from a creative and financial standpoint. Handmade gifts are the best and I've long been a paper-crafter. This was a birthday present for my daughter that would be something that she would love and that her friends wouldn't have. The challenge was impossible to resist. Aside from not mastering wood filler as well as I would have liked, I could not be happier with the way it turned out. Ana's plan was super!
Comments
Cindy from Indiana (not verified)
Tue, 09/06/2011 - 09:45
Love it!
Great job! I love how this table turned out - especially for the price! Really well done.
JongPogi
Sun, 01/20/2019 - 12:39
finishing
Hi what color di you use on the top?
JongPogi
Sun, 01/20/2019 - 12:42
finishing
Hi, can you add details on how you achieved that finish when you get a chance? like colors of the paint and how many coats.. thank you.