Community Brag Posts

This bed was made from Ana White's plan for the farmhouse bed with storage drawers (twin size). I made this bed for my daughter as her first "big girl" bed. I did modify the plan somewhat to make the footboard taller and act as a bed rail on the end of the bed. This bed came together really well! Plans were great! 

We built the Farmhouse Table using the updated pocket hole plans. We adjusted the size and left off the stretcher board since ours is much smaller than the plans call for.

I built this outdoor sofa out of Blackwood. I tweaked Ana's plan to include a backrest and a support in the front, as my planks are only 23mm thick.

We needed extra seating for friends to come over for football game days, so I took the outdoor chair plans and decided to use it for a den chair. Simple build, but I did add some 1x3 boards on the rails for more comfortable armrests. Add some appropriate color cushions and it's ready for football season! Quick assembly, but as usual, staining and clear-coating took the bulk of the time spent.

I used the main plan for ideas, but opted to use 3.5 inch pickets instead, which allowed for a smaller planter that wasn't as big. Also chose to miter 1x3s for the top which I think really finishes it off. Sanded everything with a belt sander to 220 grit. Used min wax golden pecan plus three coats of poly inside and out. Finished size was about 17x17. Tile spacers work great to keep the gaps even!

$10 Ledges made with 1x3s instead of 1x4s and fronted with cute trim pieces I found at Orange store. Finished with Behr Marque sample paint that didn't make the cut for the hallway walls (color: Gotham Gray).

After searching the town high and low for a 10" high wooden stool, I decided to make one. Ana had the perfect stool pattern to modify for our needs - A little shorter, a little wider.....et Voila!

It's the perfect height for little ones to reach the taps in the bathroom, as well as helping out in the kitchen from time to time. And, the cedar smells wonderful.

Finished height: 10"
Top measures: 11.25" x 16.5" (2 boards, cut 16.5" long + a space in the middle)
Footprint: 12.375" x 17.375"

I also lined up the rails (instead of staggering them), similar to the Harriet Higher Chair plans. The joint will be weaker, but I prefer the cleaner lines on such a short step stool.

Thanks Ana for the great plans!

I completed this project using pine plywood for the body and doors and a pine board for the top. Modifications included omitting the drawers and adding doors instead. Side doors open up to adjustable shelves, which I used the Kreg Shelf Pin Jig to create the holes. The hardest part was fitting the doors. I would suggest waiting until the unit is build, then cut to size leaving space for your paint or polyurethane finish. The hinges are from Lowes and the knobs are from Hobby Lobby. I did add veneer edging to the front as well as the sides of the doors- this was a bit messy and I spent a lot of time sanding off the adhesive that seeped out the sides. I used an old iron I picked up at Goodwill so I wouldn't ruin my clothing iron.

After diving head-first into this website and too many projects to mention, I decided it was about time to have a workbench. I received some free scrap wood from my neighbor so I spent a quick couple of hours putting this together. The plans were great and it went together very quickly. Looking forward to using this for more projects!

I used a combination of the farmhouse table and the tryde coffee table (but on a larger scale). I don't have a Kreg drill or any of that and so I just screwed from the top side down. Since I knew the screws would show, I decided to take a platinum/shiny silver Sharpie to color over the screw heads to make them stand out.

The legs were a 2x4s glued and screwed together. Can't find any untreated 4x4 at the local Lowes or Home Depot, so this was my next best option.

I used a few coats of Rustoleum Dark Walnut and then Rustoleum Semi-Gloss poly.

I have since made a new bench with the same main design, but just to a small scale. Also, I did it opposite of the top. The table is 2x4 with 2x6 breadboard ends. The bench is 2x6 with 2x4 breadboard ends.

This is The Traditional Wood Toddler Bed. Built straight from the plans. Worked out great and my daughter loved it!