Big Kids Picnic table. Made this for my daughters and they absolutely love it. Just the right size for a 9 and 6 y/o.
I adjusted the measurements for the console to make a bed bench. The over all length is 66.5", making each horizontal 2x2 26" long. The 2x4 legs are now 18" heigh. Love the end result.
Fri, 01/06/2017 - 19:21
I haven't finished it yet, but thanks for the height modification!
https://mrsonthemove.wordpress.com/2017/01/07/entryway-bench/
In reply to My take on it - as an entryway bench by Cazeliea
Sat, 05/23/2020 - 21:01
Love it!
Wed, 01/22/2020 - 08:14
What are the brown spots on the front of the legs? Are those just glued on buttons?
In reply to What are the circles? by Richard6959
Sat, 05/23/2020 - 20:56
Decorative nail heads. I think they screw in.
Thu, 01/30/2020 - 09:49
What was used for the decorative circles at the bottom of each leg? Its not mentioned anywhere in the plans and I can't tell from the pictures what was used. Please explain. Thanks.
In reply to What was used for the… by Richard6959
Sat, 05/23/2020 - 20:56
Just as a decoration. They serve no actual function!
I changed up the legs because I had a beautiful piece of reclaimed wood I've been looking to use. I did use these plans for the concrete top and it turned out great! Just followed all of her advice. It's very smooth, almost feels like soft cotton, with only tiny bubbles. Thanks for the great plans!
My son chose to make a workbench for his high school theater for his Eagle Scout project, and selected the Ultimate Roll Away Workbench with Miter Saw Stand as the basis for the project. The theater teacher wanted pegboard for tool storage, so we extended the rear legs on each workbench and notched the top to allow them to pass through. We built two frames from 1x3s to fit inside the rear legs, then put a pegboard inside each one.
To secure the extended legs, we added a riser shelf from 1x8s. We put a storage station for drills at one end of the riser shelf.
We also made all the cart shelves adjustable and added an adjustable shelf under the miter saw, and added lighting and power strips.
We left out the panels at the end of the workbench to allow access to the shelves there without having to remove the carts. Once we had constructed it, we added a brace at each end of the workbench to better support the outside front legs.
This plan was the perfect one for the theater, giving a stable work area for the miter saw and allowing for tool and materials storage. The carts can be rolled around to where a work surface is needed. This will come in handy for years of set construction in the theater. So proud of my son and all the leadership and hard work he put into this project!
Mon, 10/18/2021 - 11:54
WOW, that is absolutely amazing, thank you so much for sharing this story!
This is actually my second build. I made my dad some Hyde end tables for his deck at the cabin and they went up in the fall before I could get pictures.
For this, I sold an Ikea kids table to pay for it. Most of the wood I had from my dad's basement and went ahead and bought an MDF table top for $8. I want to save up for the big kreg jig kit. I could have actually gotten two table tops out of one sheet if I had altered some dimensions. But build the base first before I bought the top.
Project itself wouldn't take too long if I had more clamps, and no kids! :) And next time I will be spraying!!!
Built this great pergola from Anna's Weatherly Pergola Plan. I am very pleased on how it turned out. This was a fairly simple build and I added a few of my own touches to it. I used Red Cedar as my wood of choice. I also added a great Olympic Stain + Sealer to help keep it looking brandnew. I hope y'all enjoy the pictures.
Sun, 04/13/2014 - 11:17
I just wanted to say that 4th picture is so cool looking. Love the dark clouds and blue sky. Very nice pergola, by the way.
Plans were easy to follow. After my younger daughter fell down the original ladder, I changed them out with steps. They have a better incline. I finished assembly in day one. Then paint on day two.
The Shelf Help app helped me customize this to my space, the plans were excellent. Thank you!
Sat, 10/23/2021 - 17:14
We are so happy you tried out Shelf Help! It looks amazing~
My neighbors grand-daughter is about to turn 3 and I thought this would make a great present for her.. plus, when she saw it online while visiting me (I was checking the website as usual), she said "Oh, I NEED one of those!". I laughed and then that night went out and checked my scrap pile to see if I had everything I needed to build it.
Hubby and I built this as our first build! It's a modified version of your farmhouse table. We spliced together your farmhouse table plans and a plan for a desk with "x" legs. We modified the dimensions to fit our formal dining room. We just hosted our first ever Thanksgiving dinner at our new home, and fed my whole family on this table. Everyone loved it! Thanks for the inspiration!
Submitted by Valeria Green -
My husband built this table and bench for my son and his wife. He is presently building another by request for a young couple.
After watching your tiny home builds we decided to build our own. It's almost complete:)
Sat, 11/06/2021 - 17:46
That looks beautiful, we'd love to see the inside when it's all done!
This was such a fun and easy build! I love, love, love it! I work at a lumber yard, so I was able to have my awesome lumber guy get me some good straight boards. Straight boards are a must! I had my husband help get the first peices screwed together, but after that, it was easy enough to do myself.I don't have a cool nail gun, but I do have a rockin' hammer drill that did the job. I also don't have a kreg jig (birthday wish!) but using stainable/paintable wood putty, the finish came out great.I used the screws I had on hand, 2 1/2 drywall screws, and 1 1/2 finish nails for the frame.I used 1/4 Lauan for the backing, I painted it before nailing it on.
Super fun easy build. It feels nice to build my own stuff, and my husband it totally diggin' me using the power tools:)
Kyli
We recently got a new puppy and the toys were all over the house. I decided to make a simple yet practical box for his toys....I'm sure the box will be chewed up soon :)
Wood type: Pine
Finish: Water based polyurethane, Minwax walnut stain, white acrylic paint.
Cut List: Only one 1" x 6" x 8' board was needed for this box.
Full detail instructions on my blog:
http://www.woodworkingfourdummies.com/blog/rustic-whitewash-box
Cheers,
Ian
Submitted by Carla Santiago on Facebook -
We did a bench, I got your plans off Pinterest. We just put a slight slant to the back and we love it. Thanks for the great plans.
Our 1x6 cedar fence posts were like $2.39 each, but the 1x4's were $1.17 each, so $9.36 for the cedar plus about $2.50 for the trim. But on the 2nd bed, we opted to use 4x4 @ 8' cedar that I got for half off (@$8) because there were 3 "beat up" pieces left. So our total was @ $13 each.
My wife and I were perplexed about what to get my 2nd daughter for her 3rd birthday. We were also tired of all the plastic around the house. I was browsing and saw your kitchen plans.
Interestingly, one year ago we remodeled our main kitchen when my wife was 8 months pregnant. So we used our kitchen as the model and built a smaller scale version for my daughter. Complete with stainless appliances and accessories. The counter/backsplash was the sink punch out from our main kitchen counters that I kept after I installed them.
My daughter was thrilled with the way it turned out!
This bed was built custom for the girl who ordered it. She wanted both a bookcase headboard on the long side and a traditional headboard. The bookcase headboard could not block the window and needed to have access to the outlet behind the bed. The bed was designed to match a dresser that had already been purchased. The drawers below give additional storage.
This is my first build! It came together really easily. I modified the dimensions to fit my space. I didn’t add the black pipes, simply because I couldn’t find all the pieces, or the corner brackets, and I think it looks great without them. I added a handle (a towel bar I found on Etsy) to pull it in and out. I used rough cut cedar, and have not finished it. I’m not sure if I will. I wanted to spray paint the wheels, but the person that helped me attach them (a.k.a. my dad) was ready to to help me before I had them painted! But I love it, and it really adds functionality and stoage to this little gap between our washers and dryers.
My husband and I worked on this in the evenings. It took us about a month, just because we didn't have the time to devote all at once. We modified Ana's plans for the Apothecary Media Console to accomodate a surround sound bar in the center and to custom fit our baskets. We went with 4 cupboards to keep a uniform look. The faceplates were painted before we permanantly attached them with gorilla glue. . . one of the last steps. The finished cabinet is approximately 86 inches wide by 33 1/2 inches tall by 18 1/2 inches deep.
