Community Brag Posts

Double Lounger

Submitted by Celeste808 on Sun, 05/19/2013 - 07:47

Super easy project! Love it and made it in a weekend (taking breaks of course). Did paint all the pieces before assembly to make it easier, and added little pieces to the sides to make it resemble the West Elm Double lounger. Total cost for the wood and hinges was $50! Compared to buying it at $549... Im in love with what I made! Thanks again Ana for an amazing plan. Now to work on the cushion <3

Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Valspar Outdoor White Paint
Recommended Skill Level
Beginner

Comments

spiceylg

Tue, 05/21/2013 - 04:41

Want to build one of these for sure. Question, especially since it's double width.........will those 1" width legs hold all of that weight? They look so thin.

In reply to by spiceylg

Celeste808

Tue, 05/21/2013 - 16:19

I thought so too! But its really solid. Looking at the West Elm version it has the same size legs. I might beef them up though just to give me more piece of mind! But so far so good.

spiceylg

Wed, 05/22/2013 - 03:17

Cool, but then I thought the West Elm version's looked so thin, too, lol! When we built the outdoor sectional, we used 2x4s because several people we know, well let's just say extra support was needed! Be sure to post the pics of it with the cushion. Will you be making it?

In reply to by spiceylg

Celeste808

Wed, 05/22/2013 - 17:49

Ill be making the cushion here soon, I found its really not hard at all and then you can get exactly what you want. I plan on using the same fabric will all of my DIY outdoor furniture. Will post once its done ;)

Seasonal And Holiday

Bunny trug

Submitted by KTKing on Tue, 04/07/2015 - 08:47

This was my first wood working project. I made this bunny Easter basket for my son's first Easter. Everyone loved it. I can't wait to try other projects!

Finish Used
Varathane in bleached blue
Recommended Skill Level
Starter Project

Custom grandy

Custom 75" grandy

Estimated Cost
$275
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate

Comments

rust0r

Sun, 07/23/2017 - 08:18

That is beautiful!! What color is the base? (Brand and color)

 

What wood/stain did you use on the top? I love how it contrasts itself, would be great for other furnature choices as well.

 

Thank you

rust0r

Sun, 07/23/2017 - 08:24

That is beautiful!! What color is the base? (Brand and color)

 

What wood/stain did you use on the top? I love how it contrasts itself, would be great for other furnature choices as well.

 

Thank you

Flip Down Wall Art Desk

Submitted by Anonymous (not verified) on Mon, 10/04/2021 - 16:45

Followed the plans, made a few mistakes but my son and I like the overall result. Thanks Ana :)

Built from Plan(s)

Comments

entryway bench and shelf

This was a little more difficult than we anticipated but totally worth it. We shortened the width to fit our space, and kept the sides straight instead of angled, just for simplicity's sake. The Kreg jig really came in handy here. We anchored the shelf with cabinet screws and will be adding small L brackets at the top into the studs. With a tall toddler at home we are being extra careful.

Estimated Cost
~$125
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Rustoleum Kona Brown (not spray) in semigloss, rolled with foam roller. Used a white primer underneath-not sure if really necessary.
Recommended Skill Level
Beginner

Doll baby beds

My Grandaughter wanted a Baby Bed for her dolls. I made one for her. and one for a little friend of hers. I just used 2x2's and plywood, then used rattle can spray paint to finish.

Estimated Cost
$30
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
white Krylon spray paint
Recommended Skill Level
Beginner

Comments

DIY Pixel Mario Wall Art

I love it when I can combine woodworking and geeky things. The classic Super Mario Bros was my introduction to video games, and thus 8-bit Mario will always have a special place in heart. <3

I have a tutorial on my blog on how to make the pixel Mario. I also made a video tutorial. WATCH IT HERE.

 

View in YouTube.

Estimated Cost
$10. I purchased two 2x4s and purchased CA glue. The rest of the supplies I had on hand.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Watco Danish Oil - Medium Walnut
ECOS Paints Woodshield - Special Walnut
Homemade Red Dye
Recommended Skill Level
Beginner

Comments

Storage shelf

Submitted by Anonymous (not verified) on Mon, 10/04/2021 - 18:45

We made smaller versions of your 8 foot shelf. The plans were perfect. Thank you very much

Built from Plan(s)

Comments

Nightstands for Christmas

Submitted by ambermae on Thu, 03/10/2011 - 06:21

I made this pair of nightstands as Christmas gifts for my husband in 2010. They were my first project and I'm pleased with how they turned out!

Built from Plan(s)
Estimated Cost
$80
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax stain plus Tung Oil
Recommended Skill Level
Starter Project

Kids Adirondack Chair!

Submitted by briane0398 on Fri, 05/24/2013 - 07:31

Over the last couple of summers I was attending a lot of my friend’s kid’s birthday parties. As a way to make something more personal I started making these chairs that I found on Ana’s website. They were a huge hit and pretty soon people were asking me to make more.

Built from Plan(s)
Estimated Cost
30
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Spray Paint
Recommended Skill Level
Beginner

Tryde end table

Submitted by mdbennes on Mon, 04/13/2015 - 10:37

I built this table in about 3 hours with 5 2x4s yellow pine for the total cost of around $17 total...thats not including the kreg jig screws or stain.  I deviated from the original plans for the top to try something different with the 45 degree mitre cuts.  It came out great but I had to review a youtube video on making the kreg pilot holes at the 45 degree angles to attach the corners together.  I then cut the (4) 2x4s to fill out the top and used kreg jig screws to attach.  Very nice instructions by Ana and after posting to my FACEBOOK page, I'm getting orders!  :)  

Estimated Cost
18-20
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Minwax Early American stain...then Minwax Polyurethane 3 coats.
Recommended Skill Level
Beginner

Landry Hamper Dresser

Submitted by old_man on Sat, 08/12/2017 - 15:46

So the GF at the time was not happy I was still living out of landry hampers. I promised here I would do something about it. This is what I did. The top hamper is used for soiled clothes, once it's full you simply remove it and bring it to the landry room. The rest just store clean clothes. Simple and effective. 

 

The hinges and latches are just outdoor gate hardware found at any of the big home improvement stores. The wood is just construction lumber. 4X4 for the frame, 1X6 strapping for the panels, and I think there are some 2X4s and 2X2s for the rails. Overall it took me a weekend and then some. I had to build it in two pieces to get it out of the basement, it is really heavy. I used higher quality hampers that had the regidity needed to be able to slide partially out and not buckle. 

Hardest part was figuring out the dimensions. How many 1X6s would be used vs how wide the hampers are. 

It's still being used over a year later. 

Estimated Cost
~75 due to high lumber costs in my area + cost of hampers
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax stain and water based poly.
Recommended Skill Level
Intermediate

Plant, shoe and bag stand

Submitted by Anonymous (not verified) on Tue, 10/05/2021 - 02:39

This is a stand I made for my sister who wanted something at the front door to put her shoes and shopping bags

Who's Afraid of the Simple Bed?

Submitted by QueenMahin on Thu, 03/10/2011 - 21:11

Building Ana’s farmhouse doll bed went so well that I felt ready to take on a full-sized bed.

Each project seems to come with its own set of lessons. I learned the hard way about the “Measure twice, cut once” rule with a couple of “oops” cuts that sent me back on another trip to the Blue store.

Sourcing untreated 4×4′s was also an issue. I ended up gluing and screwing 2×4′s together to use as the headboard and footboard legs.

The biggest issue, though, was my own fear. Sure I hit some stumbling blocks during the build, but resolved them and got the headboard and footboard all put together… and then choked. Who the heck makes her own bed? Is this really going to work? I delayed and delayed the final steps of screwing the siderails to the legs and attaching slats until I finally had to give myself a stern talking-to and a self-imposed deadline! Has anyone else ever been scared to push through to the final steps?

OK, here goes! I wasn’t sure that I understood the step about toenailing lagbolts through the end of the cleats into the legs until I got out the drill and tried it. Yup, it worked just fine! Next came the slats, and then when I hoisted the mattress on and saw that I had built a bed…. Well, I don’t even know how to describe that feeling of success and empowerment. Wow!

Ana, I wish I could thank you for all that you do.

Estimated Cost
$100
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Paint or Stain Color/Type:Minwax American Chestnut
Finishing Technique: Was stuck in indecisive mode for a while and sanded and stained and sanded and stained, which resulted in a kind of weathered looking finish. Not what I thought I was going for, but now I count this as a success story and I love it!

Recommended Skill Level
Intermediate

Fancy*farmhouse table and benches

Submitted by Michael M on Mon, 05/27/2013 - 08:52

Used pressure treated (copper) and will allow to fade to grey with sun and sea air. Built to enjoy PEI mussels, lobster and beer in the open air and not too worried about the finish or surface. The table took 3 hours, start to finish - benches x 2 took longer at about 7 hours. Am getting a little lateral movement with the benches so will replace the 1 x 3 spacer with 2 x 4 and may add a diagonal 2 x 2 support as well (to match the table). I don't have/didn't use a Kreg so that may be the issue...?
Plans on Ana White are fantastic - I made the see-saw this weekend too in about an hour....thanks!

Estimated Cost
$120 in wood and $20 in screws for table and benches
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Outdoor table and seating
Recommended Skill Level
Intermediate

Farmhouse Bed

Submitted by leannb on Sun, 04/19/2015 - 20:30

Built from the King Farmhouse bed plans

Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate

Comments

mtz_lin

Tue, 11/08/2016 - 10:49

Did you use a metal bed frame or did you make the side rails and frame? i am curious how high my mattress will sit above the footboard because I want to make the side rails and use slats. I have a boxspring that I will be using.

DIY Kitchen Island

Submitted by CustomPulp on Wed, 08/30/2017 - 12:16

Island dimensions Bar 36" deep x 50" wide, counter top height and base has 24 inch depth. I was lucky enough to have the walnut donated for the project which I cut into 1" stips and glued together butcher block style. Also put a 1 1/4" band of walnut around countertop for appearances and to help strengthen the top. The base was made with pine and painted turqoise. The double waste basket was another touch I added. Thanks for looking.

Estimated Cost
base with lumber, door hardware, double trashcan hardware, corbels, paint $250.00. Pricing the Walnut if not donated, would have added another $300.00 to the cost of the project.
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
tung oil on top. Lowes Satin finish Valspar for the base
Recommended Skill Level
Advanced

Comments

Adirondack Chairs

Submitted by Anonymous (not verified) on Tue, 10/05/2021 - 08:19

This was a fun and simple project. One of my first attempts at making outside furniture and it was nearly perfect the first time....why?... the plans were so easy to follow, the techniques used were not demanding, and the tool selection was ideal for my workshop. I put them outside and I have had good reviews, and requests, for these chairs.

Comments

Seasonal And Holiday

Storage Daybed - Lessons Learned

Submitted by QueenMahin on Sat, 03/12/2011 - 05:12

Hello Builders!

I made this bed for my daughter right after finishing Ana’s Simple Bed for myself. This bed is great because it is cool-looking (the most important factor for my middle-schooler) and because it adds tons of storage space (the most important factor for me, the mom!). Ana has this bed marked as easy, and it was easy. After working on the Simple Bed with lots and lots of cutting and gluing and nailing, I was amazed at how quickly this bed started looking like itself.

As a newbie builder, I read and read and re-read Ana’s plans and the comments on the plans and any similar plans until I feel comfortable. The Storage Daybed is just three separate benches that sit side-by-side and the mattress just lies on top. Somehow, when digesting the plans, I was really confused about the divider in the middle of each bench, but eventually the light bulb went on (the divider is necessary to support and strengthen the top, but the end result is that there are three cubbies in the front of the bed and three cubbies in the back – perfect for storing off-season clothes).

So I went to the Blue home improvement store and decided on birch plywood. Special thanks to Jen for working up the plywood cutting layout that Ana included in the plan. I don’t think I could have figured out how to get the pieces cut without you. The associates at the large home improvement store were very nice, and they offered to make the cuts for me even though they said that they really weren’t supposed to make “project cuts”. The problem was that their cuts were oh, so bad! They marked out all of the cuts at once, which doesn’t account for the sliver that the blade takes out, and when measuring they didn’t even have the tape measure blade flush against the top in the first place.

On my other projects, I made plenty of mistakes. But they were my mistakes, you know what I mean? On this build, I spent so much time trying to fix bad cuts. But it’s my fault. I was concerned, but I second guessed myself and didn’t speak up while they were cutting. I ended up having to cut a thin strip of plywood to lengthen the side of one of the benches, and had to sand and sand and sand. Also ended up having to re-cut the dividers.

Oh, well. I got a little life lesson in assertiveness, and I got to add a circular saw to my toolkit! After all was said and done, this really is a great bed, and it made my heart glow to hear my daughter going around telling folks: “My mom is making my bed!

Built from Plan(s)
Estimated Cost
$150
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Glossy white paint on the trim, flat white on the sides and top. We're debating about repainting it in a bold color.
Recommended Skill Level
Beginner

Puzzle Bookcase

My Hubby and I built this bookcase on the livingroom floor on mothers day morning! It was so simple and fun. I had all the wood cut at Lowes and we just had to put it together and paint it!

Built from Plan(s)
Estimated Cost
175.00
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
paint
Recommended Skill Level
Beginner

CUSTOMIZED FARM TABLE

Submitted by dogg29er on Fri, 04/24/2015 - 12:02

This is a customized version of a farmtable that my wife found here! 

Estimated Cost
$300.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Miniwax - Espresso, Black and Poly Sealant.
Recommended Skill Level
Advanced

Comments