Community Brag Posts

Farmhouse Nightstand

Submitted by RenoRustic on Tue, 05/12/2015 - 10:17

I built this nightstand when my wife and I purchased a new bed. We had to rearrange the bedroom and as such, I no longer had a desk or table on my side of the bed. I wanted something "country" style and after searching through several different plans I found a brag post that fit exactly what I was looking for. Well, technically, I found the original Farmhouse Bedside Table plans and modified them to fit what I needed. It wasn't until after I completed the project that I realized there was a "Mini" version as well. What can I say, I'm not that great as using search. I actually built this over a year ago at this point, and it was the second project I ever built. I learned quite a bit on this project, including the fact your project will only come out as good as your lumber selection! This build actually created my addiction for DIY and woodworking. Thank you Ana!

Estimated Cost
$40
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
I used Minwax Special Walnut for the entire project, then painted the base and drawer Behr white (their basic white off the shelf, I didn't have the paint mixed) in semi-gloss. I antiqued everything for a more rustic look.
Recommended Skill Level
Beginner

Comments

Home Depot Adirondack Chair

Submitted by Seth on Wed, 06/12/2013 - 12:07

A few weeks ago my wife said she needs a footstool for our rocking chair while she rocks the baby to sleep. Being a sneaky husband, I quickly began planning to build her one because I knew I wasn't going to be able to find anything commercially sold that matched our baby room colors. A week later I have 2 Adirondack chairs, a table, a bunch of tools I didn't have before, and no footstool.... So about the chairs...The plans were super easy and well thought out. I learned a few things about cutting angles, which if you look closely you can see the seat portion does not extend to the front legs. Instead of wasting more wood, I simply adapted the plans. This makes the backs of the chairs sit upright more, but I actually like it because I have a bad back. We sanded it with 150 grit sand paper, and should have done a second sanding with a finer paper, but we didn't. I primed the wood with a basic multi purpose primer and then painted with BEHR outdoor white semi-gloss. I wanted to seal it with a poly, but Home Depot did not recommend sealing with with Poly, and I could not find a Poly in Home Depot that did not warn AGAINST using it on painted surfaces. Oh, and make sure you wear eye protection! Dust in the eyes is brutal. Fortunately I have a kind wife who washed them out for me. :) Now I have a nice pair of clear glasses.

Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
BEHR white semi-gloss exterior paint

They only needed 1 coat of primer and 1 coat of paint. This paint was really thick.
Recommended Skill Level
Starter Project

Comments

Small / Short Shed with doghouse...

Submitted by drowland on Fri, 12/22/2017 - 05:19

I needed a shed to get my outdoor and seldomly used equipment out of my gargage.  But I needed the shed to be small so it doesn't take up too much space in the back yard and my HOA will not allow it to be taller than my fence.  So I needed a small/short shed.  I didn't use any plans, but it would probably have been quicker if I had.  I did it with free time during a week, but could probably be all completed during a weekend.  It was probably a few hundred total.  I tried to reuse existing hardware/wood where possible.  I'm a cheapskape.  Here's my blogpost I did with additional pictures...

https://drowland.wordpress.com/2017/12/22/small-short-storage-shed/

You can see I also added a matching doghouse. 

Estimated Cost
$250
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
none. I want to stain it when I stain the fence. The siding is the same as the fence so It should match perfectly once stained.
Recommended Skill Level
Beginner

Shoe dresser

Submitted by RoseOfShaz on Thu, 07/04/2013 - 15:26

I didn't build this shoe dresser because I particularly needed one, but it looked so lovely that I couldn't resist.

- I modified the plans by building 3 bins instead of 2 so it could hold more shoes.
- I decided against the dowel stick and opted for hinges instead, which were surprisingly not too difficult to assemble. I found that I didn't even need the magnets after installing the hinges as the doors stay closed.
- I used 7" chains on both sides of each bin instead of a belt to make it extra sturdy.
- I added two back legs.

Et voila! This is the end result. I'm very pleased.

PS. Those flopping bins are a pain when you're trying to build!! An extra pair of hands is definitely recommended.

Built from Plan(s)
Estimated Cost
$150 (with extra bin)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Walnut (can't remember the exact name of the stain, but it's the one Shanty 2 Chic always uses!)
Recommended Skill Level
Intermediate

Comments

SoCaliforniaMel

Fri, 07/05/2013 - 22:49

Pretty :) Good Job. Now if I only had the space for one thats 10 rows high :P I like the stain color too. Shanty 2 Chic always uses Rust-o-leum. I think its called dark walnut. Dont quote me though. I love the stain and spray paint combo colors they use.
~Melody

Addison’s room

Submitted by aderosa on Thu, 02/01/2018 - 12:45

It was time for Addison to get a big girl bed. We used the Kentwood design and the trundle bed plans. 

Estimated Cost
140
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Valspar cabinet paint
Recommended Skill Level
Beginner

12 ft farmhouse table with extensions - reclaimed wood

I had no experience building furniture prior to this project but I wanted a 12 ft outdoor table and could not find one.  This tables center section is 8 ft and was built roughly following the plans for the farmhouse table.  I added two 2 ft extensions at each end making the overall table 12 ft.  The extensions included aprons so when installed they look to be part of the table.  The extensions just plug into the end apron of the center section with 2x4 oak braces which engage in the apron and under the table approximately 2 ft from end.  There is no visual sagging of the extensions. I finished the table with Sikkens DEK finish.

 

 

Estimated Cost
The lumber was reclaimed and cost approximately $400 for this project.
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Sikkens DEK transparent
Recommended Skill Level
Beginner

Bedzilla

Submitted by pmarchino on Sat, 02/17/2018 - 19:28

We had bought a house in New Mexico that was sadly lacking for closet space, as well as square footage for furniture. I was looking at Ana White's website, and saw the plans for the Farmhouse storage bed. It was good, but needed some steroids. I got out the calculator, and started upsizing EVERYTHING. What happened was, BEDZILLA!! King sized bed with 12 giant drawers. I also added lighting to the headboard for reading. It was a blast to build, and I was very pleased with, and proud of the finished product. 

Estimated Cost
Good question!
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Polyshades Pecan
Recommended Skill Level
Intermediate

Simple bench from pallets

I had some left over wood from pallets and I really liked the look of the simple outdoor bench. One pallet was made out of some type of red colored wood and I decided the slats for the seat would look good in the red colored wood. The rest of the bench was from a lighter colored pallet. I used nails and glue to attach the seat slats so that my daughter could help. She loves to help, but does not like my drill even if she has hearing protection. See more at http://www.makeitlovely.com

Estimated Cost
Free
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Minwax Early American wood stain (1 coat)
Recommended Skill Level
Beginner

Golf Club Locker

Utilized the plan for the Locker Book Shelf-Full Size and modified it a bit to convert to a golf club locker. Definitely keeps all the clubs, shoes, and accessories organized and eliminates the clutter. My wife loves it, course she added the baskets, which makes it look awesome! Actually this is how I stumbled upon Ana White's website. I was looking high and low for a plan for golf club lockers, and found Ana's website as part of the process. Best google search I've ever done!

Built from Plan(s)

Comments

Modern Farm Table - Dark Stain

Submitted by nittle on Thu, 07/25/2013 - 22:27

This was my first project. I learned a ton through the process. Ana's directions were very easy and straightforward.

I purchased the wood (Doug-Fir) from Lowe's and cut it at home with a circular saw. I filled the gaps in the table/benches with a crystal clear silicon caulk - I have mixed feelings about this, since it dried kind of shiny. The coats of polyurethane helped to dull the finish a bit. For the stain, I used Rustoleum Kona, and Minwax Helmsman Spar Urethane Semi-Gloss for the finish.

Like others have suggested, I built the benches first, then the table. This was a great tip, since you can learn the design on a smaller model before tackling the beast of table (it's heavy). I also added some horizontal supports on the ends of the tables/benches, not in the original plans. I just duplicated the end aprons of the table and countersinked/screwed them in at an angle.

Cutting and building the project didn't take nearly as much time as the sanding, staining and finishing. The back-end part of the project was very detail-oriented and stretched out over several days.

Overall, very pleased with the finished project. It was very empowering to know that I can build something like this. Thanks Ana and all of the others with their tips and suggestions! My wife and I know have a long list of other projects to tackle :)

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Rustoleum Kona Wood Stain and Minwax Helmsman Spar Urethane Semi-Gloss for the finish
Recommended Skill Level
Beginner

Picket Planter Boxes

Submitted by JaxCopper on Mon, 05/09/2022 - 19:09

Thanks Ana, I built your planter box, actually built 2 of them, one for each mom. The were a huge hit and I already have people asking me to build them one.

So loved building this planter box. Thanks for all you do for your fellow woodworkers!

Dale G
Callahan, FL

Comments

Greenhouse

Submitted by Anonymous (not verified) on Wed, 06/01/2022 - 06:08

I am so in love with my greenhouse, it is amazing the plans were perfect and it went up without any problems, your designs are amazing and beautiful. We are going to do the chairs next!!!

Built from Plan(s)

Comments

Northern Wisconsin White Pine Bed and Dresser

In need of outfitting the spare bedroom for overnight guests I came upon this site and found the storage bed plan we liked.  After building the bed of course a dresser was in order.  My sawyer has some northern white pine that came from the Wisconsin Northern State Fair grounds in Chippewa Falls.  Having never worked with white pine before I found it rewarng and was happy with the finished product.  Hope our guest enjoy it as much I had building it

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
A self leveling poly finish by General Finish.
Recommended Skill Level
Intermediate

Farmhouse toddler bed

Submitted by Lukilla on Fri, 11/30/2018 - 18:37

Our little guy decided at about 2 years old that his crib just wasnt going to cut it anymore. My wife and I had a blast throwing this together. A good tip is to use leftover pieces from the headboard to cut slats.  We love our wood projects, check out our facebook page. Wyvace woodworking.

Estimated Cost
100
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Minwax jacobean/espresso mix on the platform. Red mahogany on the headboard
Recommended Skill Level
Beginner

Christmas Tree Shelf

Submitted by bknjohnson on Fri, 12/21/2018 - 10:24

I found the Christmas tree shelf plans and since I had drawn my wife's aunt's name for this year I knew she'd appreciate this build.  I chose 1x6 top choice pine and a wider piece for the base since she may decide to set this on the floor instead of hanging it.  I also had some oak plywood I used for the back.  I screwed all the pieces together, countersunk and filled the screw holes with wood putty.  The paint I used was Benjamin Moore, the color was Balsam (567) and I really like how the color came out.  I painted the back and the bottom with standard black interior paint just to protect the wood a little.  I coated it with a couple of coats polycrylic and bought a couple of Christmassy items for the shelf to get her started.  Can't wait to see what she thinks on Christmas day.

 

This can easily be built in less than a weekend depending on your skill level.  I had to recut one of the boards when I caused some damage while putting it all together.  The sanding, painting and finishing takes as long as you want depending on the finish and care taken.

Built from Plan(s)
Estimated Cost
Less than $30.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Benjamin Moore paint (Balsam) and Minwax Polycrylic.
Recommended Skill Level
Beginner

Twin Over Full Bunk Bed

Submitted by Anonymous (not verified) on Tue, 08/30/2022 - 15:21

Utilized the plans from this website to frame out the general idea, but as typical with my projects, I took it to a little further and utilized more traditional joinery (mortise & tenon, oak dowel pins, dado). Guard rails are bolted with carriage bolts. Hand planed all boards and added chamfers to every edge (zero sandpaper). Both beds are joined together with 1 inch oak pins (x4 legs). Each bed breaks down very easily by knocking out the three 1/2 pins that join the legs to the stretchers (x4 legs).

Both beds were built out of structural southern yellow pine lumber. The boy's bed was merely varnished with Danish Oil (dark walnut) all over - on Southern Yellow Pine, this color choice gives it a rustic look. Girl's bed was two toned: painted white and stained with Varathane (Kona), to give it that country look.

I think the total installed cost of the beds was just over $300 - $350 for the lumber, oak pins, any hardware, and finish material. This was a while back, so with lumber prices high, I'm not sure that's easily done anymore. But, it's solid as a rock and will last an extremely long time for our family.

Great project. Thanks for the ideas! Steve

Modern Adirondack chair meets Shou Sugi Ban

Submitted by Anonymous (not verified) on Wed, 09/14/2022 - 15:17

Made one change to plans. I used 2x6s for the arms. I used the Shou Sugi Ban burning technique to finish the 2x4s and 2x6s. I stained the back and set and the applied a couple coats of poly. Love the chairs! Building a couple more sets for around the fire pit. Thanks!

Comments

Mudroom Hutch

Submitted by Anonymous (not verified) on Fri, 11/18/2022 - 09:51

I have been dreaming of this project for YEARS! I used shelfhelp to design the shelf size and the open bottom mudroom plans with matching hutch and the plan with lift up boot storage for inspiration. I still need to add trim but I'm so excited I couldn't wait to say THANK YOU for all the inspiration and help! We absolutely LOVE it!!

Comments