Community Brag Posts

This was a really fun starter project for me. I've never made furniture before and I ran into some issues, but I learned a lot and enjoyed myself! My husband and I live with my Father-in-Law who has all the tools I needed (though I'm going to purchase my own later on).

The stool and table plans are here: http://ana-white.com/2009/11/plan-kids-large-storage-play-table.html . I modified it slightly because I was using scrap pieces (two doors from a particle board wardrobe). I don't like particle board... but I figured since it's my first try, I wouldn't waste any cash since I had all the stuff here, even the nails and screws.

So I made the table about 2 inches shorter and the stool 1 inch shorter. I also used a rectangle top for the table with one side flush against the table side so I could put the set against a wall (i.e. three sides have overhang, the 4th is equal with the legs).

I painted both sets a dark red orange (my husband's favorite color) and let my daughter put her handprints all over in white paint . She LOVES it. And despite the 'wood' I used was particle board, it's pretty strong. I'm pleased. I will probably make another one with stronger material in the future.

Oh there were a lot of holes and such from the used board and some breaks from being thin, crappy board, but I was able to use filler one a lot of it and glue too. It's hard to tell it was a beginner job from a few feet away! Haha!

Used 2x4s for the top instead of 2x6s. All the shelves are 1x2s. My first attempt at a door and drawer - it kicked my a**! 

Top stain: Minwax Golden Pecan

Then Minwax Polycrylic 3 coats

Had to build something to go with our brand new OLED TV. Combined Ana's 'Grandy Sliding Door Console' with a modified version of these modern barn door plans found at https://howdoesshe.com/build-a-fixer-upper-style-modern-barn-door/ from @angelarosehome to make the finished product shown here. My wife loves it (the pup doesn't mind it either)! 

I recently built the Parson Tower Desk (which I see is no longer here on the site). I built it up 3 tiers vs. 2 tiers as the plan called for. Using the Kreg Jig this desk came together like a charm. It was the first piece of furniture I've ever built. Following Ana's plans was so simple. The part that took me the longest was painting it.

I built this Taylors console table and barnwood frame for my guest room which also contains my double Lydia daybeds! The room that Mary built...

I made these two tables for a coworker who lost her home in the Valley Fire in California in 2015. She only had owned her home for 71 days and she lost everything. So, I thought I could make her some furniture as a very small token. They took me just half a day to build. I love this hobby.

   The only thing I did different from the plans was to add 1bys to the face of the drawers and put removable dividers inside of them. Also I tinkered around a bit with miscellaneous little trim pieces you can pick up at a home improvement store. I decided to spray paint it with rust oleum silver lilac, I'm not exactly crazy about the color, but besides that I'm happy with how it turned out.

I am so grateful for this site and the detailed plans. My youngest daughters bedroom is super small and had very little room to play. I have been wanting to get or build her a loft bed, but most sites wanted money or the beds were very generic. I started this project on Christmas break thinking that I could get it done over the holiday. After about 10 trips to the hardware store and working on it periodically, it was finally finished in March. Both my daughters love it. My oldest now want one, but I think her room is more of the fashion of an industrial looking metal one. I did make some modifications to the front as I did not want to close it in, making here room look smaller. We have put up curtains that she can close. She will sit for hours reading and playing underneath. I have gotten lots of comments from friends. This was a tough but good starting project. There are some things that I would do differently, small things. Thanks Anna for your website. Now, on to a bed for me. No, it will not be a loft bed. Thinking of a platform bed.

My husband and I worked together to build this spice rack with the plan from ana-white.com. The instructions were very clear and easy to follow.

As you can see from the photo, we haven't hung it on the wall just yet. We have a narrow galley kitchen in an apartment, and I won't be able to get a good photo of it once it's hung.

Thank you, Ana, for inspiring us! We have picked out several more plans to build.

Sarah Hughes

I just loved this shelf that I made 10 of them for family for Christmas! We made the original size but decided to size it down by a third. :)

This was constructed out of solid black walnut from a tree that grew in our homeowner's association area. A neighbor and I had the tree sawn into planks, which we air-dried for a year, and then divided up the wood. So this really is an "all natural" project.

Finally finished my first build! This was initially meant to just be a file cabinet but by the time I got a little over half way through we got rid of our huge office desk to make a guest room and decided that I should a top to the file cabinet to make a small desk to go in our living room. It's a perfect fit! This definitely took me longer than I had expected thanks to a lot of cold or wet days, a busy schedule and a lack of a garage. If it wasn't light out and dry I couldn't work. In addition, since this was my first build, I had to learn a lot of skills, buy a lot of new tools (Christmas helped) and fix a lot of mistakes (not to mention the untold number of trips to the hardware store). However I am so excited about how well this turned out I am already halfway through building a set of night stands and my "to-do" list is very, very long!

The bed was a great project to start with. Very easy to follow instructions. I was a little worried that the bed was going to be too big, but once my husband and I got it together it was perfect. I used the metal frame that the bed already sat on, so I didn't need supports. I added a special touch for my husband since it was almost our anniversay. It's barely noticable but I carved our initials into the footboard. He loved it! After I completed the bed I moved on to the table. I forgot to take progress pictures. My next project I will be sure to do so. This was a joy to build. I still can't believe I made these beautiful peices! One more bedside table to build and my room will have all new furniture. Thank you Ana for the plans!! It's going to be tough to figure out what to build next. so many plans to choose from! :)

Built this off another plan

Built from solid walnut milled from a tree that grew nearby.  Had tree cut into slabs, air dried the wood for a year, then planed into boards for use in the project.  Rabbitted the supports rather than depending only on screws.  Finished with tung oil and clear polyurathane.

We followed the plans exactly. I I got 4 separate square cushions at Hobby Lobby, got the fabric there also. My friend sewed the cushions for me (so sweet!) because she knows I can't sew=)

I found the little side table at a garage sale for $3 and painted it white to match. I love this piece on my patio...it's great for reading, or to sit and sip coffee or a glass of wine!

loved the challenge first project ever, my suggestion to anyone buy the kreg jig best thing since sliced bread