Community Brag Posts

Outdoor Sofa

Submitted by Anonymous (not verified) on Sun, 04/23/2017 - 15:02

Modifed slightly to make a sectional.  Used extra cushion for an Ottoman.  Added an additional board behind/beside cushions to hold them firmly in place. (2x2)
Purchased 9' boards instead from our lumberyard.  Cushions from Lowe's, throw pillows from WalMart/Canadian Tire. 
 

Estimated Cost
Approx. $700

Cushions from Lowes (7 sets at $80)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Dark Walnut / Old Master's Dark Walnut Gel Stain
Recommended Skill Level
Beginner

Rustic x Bench Minus the X

Submitted by sraper2 on Mon, 03/18/2013 - 18:59

Built this mostly out of scraps I had in my garage. I had to get a few pieces but it was an easy build. I left out the x but I will probably be adding it soon and putting it out on my front porch once it warms up. For now it's filling a big empty wall in my living room!

Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Kona stain. Still need to poly.
Recommended Skill Level
Beginner

Kitchen Island - minus the drawers

Submitted by bensona on Tue, 01/27/2015 - 12:41

Found this plans for the Gaby kitchen island and fell in love. So, I decided to try my handy work at it one weekend.

Built from Plan(s)
Estimated Cost
$80
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Cabot water-based stain Paprika. Shellac sealer
Recommended Skill Level
Intermediate

Comments

Blanket Ladder

Submitted by Anonymous (not verified) on Wed, 04/26/2017 - 12:01

Used 2x6 boards on the outside to give it a bit more depth, mounted the rungs at a 45 degree angle and used a pocket hole jig so no screws show. Height is 5' and left a bit more room on the bottom so I could cut it shorter if I ever move. Sanded it down and applied stain and a polyurethane coat to finish and protect.

Built from Plan(s)
Estimated Cost
$30
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Kona
Recommended Skill Level
Beginner

Bench to Table conversion

Submitted by Donna_Led on Fri, 04/09/2021 - 15:22

We made two of the Picnic Table to Bench units in the month of March. The second one is in the bottom part of the picture hidden by the wood rack. I took the picture from our upstairs porch. My husband is still amazed that we accomplished this. He is not a DIY'er. We built a new house in 2016 and had a bunch of leftover wood sitting on our (unfinished) basement floor. We managed to build our benches mostly from that wood. We did have to buy 3 more pieces to finish the second back/tabletop. Then we got the balance of the wood moved out to our storage barn. The color is deck stain from our porches. I chose 20 hours as our time frame because the used wood required a lot of sanding and prep work. Our time frame was probably about 3 weeks but we are 68 and 73 years old and were really in no hurry. The plans were very simple to follow. We made them 6 feet long.

Estimated Cost
Nearly free except for the big bolts and three 2x6x8ft boards. We had everything else.
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Solid deck paint from Lowes in a cedar color we already had.
Recommended Skill Level
Beginner

Comments

Flip down kids table

Submitted by EDanido on Thu, 03/21/2013 - 04:22

I saw this plan a couple of months ago, and knew right away that this is what we need for our kids - their old table was always filled with papers, crayons and they never had enough space to store whatever they did.

I made the table longer so that it would be enough for both of them, and added foldable legs to support the table top.
Since I didn't find the right hinges for the legs, I used a piece of 1x1 with wood dowels which are attached to the inner side of the legs when unfolded.

Built from Plan(s)
Estimated Cost
$ 40 - but I had to buy the wood for the table top twice...
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Walnut stain
Recommended Skill Level
Beginner

Comments

sawdust

Fri, 03/22/2013 - 16:08

Well, I now know what I'm doing tomorrow! I'm going to make a small hinged one to go in our entryway because we have nowhere to put stuff while we're getting our shoes on. Yours looks great!

Rustic hall tree-bench

I built this in a weekend. I used the Kreg pocket hole jig to build frame and also secure back panels to side rails. The bench is 4' wide and almost 6' tall. I put the coat hooks on either side of the top rails.

Estimated Cost
$140.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Flat white covered w/ semi gloss urethane
Recommended Skill Level
Beginner

Comments

Large Porch Bench - NW Indiana

Submitted by Anonymous (not verified) on Sun, 04/30/2017 - 17:37

Instructions were very easy to follow. I got wood at Home Depot and had it cut to size there as well (fit better in car that way). Without help it will take longer than if you can get a person to help out. I needed to go buy a Kreg jig, Kreg nails, and a c clamp. I used chalk paint from Joanne's. Done in 2 days. 

Estimated Cost
$55
Estimated Time Investment
Day Project (6-9 Hours)
Recommended Skill Level
Beginner
Seasonal And Holiday

Modern Adirondack Chairs - First Project

Submitted by Anonymous (not verified) on Fri, 04/16/2021 - 06:32

I ended up painting them a Bright Blue and Bright Red like crayola colors and I forgot to take an after picture but I was so excited about this because it was my FIRST time building something with wood. My husband made the table with the scraps I had leftover.

Comments

Modified Bench for backyard camping

Submitted by Keith on Sun, 03/24/2013 - 11:44

My family and I really enjoyed camping last year and with the addition of another child we will not be able to get out this season. So, I modified the simple bench plan to create a comfortable seating area while we "camp" in the backyard. With the money I saved building vs. buying, I was able to purchase a new miter saw and sander and still save a ton of green. I plan on building a couple side tables to complete the set. Thanks for the site Ana, it helps make our home more warm and affordable.

Built from Plan(s)
Estimated Cost
$100 a bench (most of the money in the cushions)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Sprayed enamel paint with a spar varnish
Recommended Skill Level
Beginner

Comments

Farmhouse headboard

I built this headboard a while back but just never got around to posting it.  I distressed the wood, painted it mint green and applied a chocolate glaze. 

 

 

Estimated Cost
$100.00
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Mint green and chocolate glaze
Recommended Skill Level
Starter Project

Comments

Adirondack Chairs

Submitted by Anonymous (not verified) on Thu, 04/22/2021 - 10:17

I originally made the Adirondack chairs in a Beach style, then I made them matte black for around the fire pit. I modified the design a little, making the arms wider (to accommodate food and drink better) and fanned the back a bit. Everyone loves the look and how comfortable they are, as well as how sturdy they are. Goodbye to those plastic chairs that break.

Thanks for the great project ideas during the quarantine.

Estimated Cost
$70/each
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
FLat Black spray-paint, and High Gloss Bright Colors brushed on (then Turtled Waxed so the chairs dry quickly)
Recommended Skill Level
Beginner

Comments

Benchwright Coffee Table

This is a replica of the Pottery Barn benchwright coffee table.  I altered Ana's plans slightly by changing the design of the legs to be 2.25" by 2". I added full extension drawer slides.  The finish is a combination of transtint shellac base coat, gel stain, transtint dye, and poly. 

 

 

Built from Plan(s)
Estimated Cost
$250.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Intermediate

Comments

coloradonp

Sun, 01/31/2016 - 18:56

Hi! The finish is absolutely gorgeous. I was wondering if you could give a little bit more detail on which products you used for the finish. I've only used oil based stains and I'm not quite sure what the transtint dye is. Thanks!

Little girl hideout

Submitted by Anonymous (not verified) on Sat, 05/06/2017 - 15:20

I changed the entrance from the front to the end and added the steps.

Built from Plan(s)
Estimated Cost
$500
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Gel stain with General Finishes Arm R Seal
Recommended Skill Level
Intermediate

Adirondack Love!

This was my second build ever, and I'm so extremely satisfied with the entire process! Ana's plan was super easy to follow, and I couldn't be more proud of how they turned out!

Recommended Skill Level
Beginner

Comments

Upcycle Lead Glass Window

Submitted by LARMO on Sat, 03/30/2013 - 08:17

This was a recycle from a window replacement project on my 108 year old home. I removed the leaded glas window from the top of a 4.5 by 4.5 street facing window with a reciprocationg saw, attached a 1x4 pine board with trim screws on the ends and trim nails on the mid-portions. Painted it with satin black with a sweep of gold and pewter for a little dramatic effect, purchased a heavy weight mirror hanging plate and attached to the wall and window back. I'm thinking of backing it with a mirror to improve looks,

Estimated Cost
$15.00 $3.00 for paint, $3.00 for pine board, $9.00 for hanger
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
1 can of black satin with gold and pewter overlay paints
Recommended Skill Level
Beginner

Comments

JoanneS

Sat, 03/30/2013 - 09:39

This is just lovely! What a wonderful use for a piece of history, it's now a one of a kind piece of art, and an instant heirloom!

Flip up desk

Submitted by Anonymous (not verified) on Tue, 05/09/2017 - 17:09

I'm in love with the way these turned out!  Thanks Ana!

Estimated Cost
$150 (incl finish)
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Stain in Gunstock, varathane polyurethane
Recommended Skill Level
Intermediate

Step stool

Submitted by brittrad14 on Sun, 05/09/2021 - 10:22

Love, love , love this step stool. It’s perfect and relatively easy to make.

Estimated Cost
$10
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Wood finish early american
Recommended Skill Level
Starter Project

Comments

Shirley Table

This is 2 different shirley console tables .  I did both out of pine boards and golden oak stain.  One I used wax on and the other poly.  

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Golden Oak, Poly on one of them. Wax on the other.
Recommended Skill Level
Intermediate

Farmhouse Desk with Wormy Chestnut

Submitted by csolanzo on Mon, 05/17/2021 - 10:37

I just completed my first build (#AnaWhiteFarmhouseDesk). It has a ton of mistakes, but they are my mistakes to learn from.
1. Measure twice cut once not measure once cuss twice.
2. Cutting 2x4s in half does not make a store bought 2x2. Which is really 1 1/2 x 1 1/2. Who determined that we would measure wood (used in carpentry which requires very precise measurements) and just round up? Awwe, they'll figure it out!
3. Steelwool & vinegar stain with a black tea conditioner provide a beautiful aged wood appearance, but when using different types of wood it is nearly impossible to match (maybe even store bought stains are like that, too.)
4. When your 95 yr old grandfather (how freakin' cool is it that I have a 95 yr old grandfather... With a planer no less) tells you to catch the "wormy Chestnut planks" on the other side (okay... I'm bragging about getting my hands on wormy Chestnut for my desk top) remember to bring you own PPE because at 95 he doesn't require ear protection and doesn't give a frog's fat a$# if sawdust shoots in your eyes & nose... What's the problem???? He never had a new pair of shoes until he was in the military serving in world war 2 so what's a little sawdust?
5. Sometimes you just need to ask for help from your trusty uncle! Thanks to my uncle Nathan (Lord do I love this man!) I finally, with his help, completed the build by assembling the desk top yesterday. I was so afraid of screwing up my gold desk top (aka wormy Chestnut)
6. Mistakes... Do not fear them, but rather embrace them because that is life's playground where learning happens.
7. Learn from others. Thank you Ana White, Woodworking for beginners members FB group and YouTube!

Built from Plan(s)
Finish Used
Steelwool & vinegar stain with a black tea conditioner provide a beautiful aged wood appearance for the body.

Desktop and shelf hardwoods were given a few layers of had rubbed poly.