Community Brag Posts

I found these amazing tables that i fell in love with! so i decided to take matters into my own hands! i adjusted the measurements to fit my needs and style, and after we purchased the wood, i got to cutting! with a little help from my daddy the project came to life in no time! now i have furniture for my living room that i can completely appreciate and adore forever! i was amazed at how easy this was and how beautiful! and for the price?! theres simply not a store to beat it! and i love all the compliments i get on them and the surprised reaction when i tell people i made them myself! i still plan on building the console table to match!

We made the farmhouse bed with a few modifications. We distressed the wood and did a whitewash finish. Absolutely love how this turned out!

With the condition of our inherited 6-sided picnic table in my mind, the idea of these picnic benches was too appealing to ignore!
I gave away our old picnic table, and bought some cedar 2x6 from the lumber mill down the road. (He had a pretty good price so I used 2x6 for everything)
I decided to make them 6feet long instead of 4, and with an overhang of 8 inches rather than two I was able to avoid making a third leg set.
I got everything cut and gave it all a coat of stain before I assembled anything and then screwed the boards together with cedar deck screws.
I discovered when I had the tabletop bolted on that the 2x6 caused some issue with the tilting, so I had to go back with a handsaw and trim the front top corners of the back legs so that the table could tilt to the bench mode.
I'm still puzzling out why I have a bit of play in the top when it's bolted in either configuration...
Now if only this chilly rainy weather would quit so we could put them outside and start enjoying them!

This was one of the first big DIY projects for my husband and I in our new home. It took us one weekend to complete. The $150 cost includes all supplies: even paint, rollers, wood filler, etc. My husband wanted to get pedestals for our front loaders because he is so tall, but after pricing it out, it would have cost around $550 with tax to get the red LG pedestals. The $150 was definitely worth it and I feel more confident that we can tackle more DIY projects like benches for the deck :) It's not perfectly made, but it's perfect for us.

The rolling bar cart (or BBQ cart) with removable tray is the latest addition to my suite of DIY patio furniture. This site has become a bit of a building obsession with me. Even with the detailed instructions, I still found ways to make this project my own: I added a 3/4" dowel and plastic wheels, instead of wood rounds. I painted all the pieces with primer and exterior paint before assembling it, because it's hard to get paint between the slats, unless you have a spray painter. The white slat design of the bar cart, park bench and matching side tables goes with the white siding of the house for my own patio picnic.

This was my first project, so it took me a while to make since I had to figure out what I was doing. But, it was so much fun and I'm excited to make more!

I sent your plans to my dad, who built a table for my daughter. She loves it! And it goes perfectly with her AG tent.

Needed a table under the TV, and this was perfect. I had to adjust the dimensions to decrease the length 6 inches to make it fit. Used the black tea, vinegar and steel wool combo for stain. Turned out great!

Thanks for the easy plans I was able to build this for my moms table.

This was a super easy and quick project. I actually lengthened it to 36 inches. I can't decide whether I need two ledges or not, but it won't take long if I need another one! My only suggestion- VERY straight boards are a must!

I used the Hailey plans with the following modifications because there's no such thing as TOO sturdy.

Instead of 2x4s on their own, I used the leftover lengths of my 2x6s for legs, joined at the corners (Kreg pocket hole screws) with 2x4s for a chunkier look and a very stable bed.

I made the legs 5" taller than the plans called for. Otherwise, the bed simply seemed like it would be too squat for my tall son.

For the casing/trim, which is pricey, I went to the Habitat Re-Store and found two matching pieces for $3.00 a piece.

I deviated from the plan by adding the trim last, after the headboard was otherwise complete. I had considered painting the casement, but decided to leave it all wood-tone, and I'm glad that I did.

The furring strips at my local big blue box store were so terribly warped that I used pine boards instead. This increased the overall price, but decreased frustration and time spent sanding. I work slowly and deliberately as it is, always worried about mis-measuring, so anything I build takes twice as long as anticipated.

With every project I undertake, my wood filler shows and my budget exceeds the amounts in plans and other brag posts. The bed and headboard combined cost me about $230 to build. That's still a great budget, but $80 more than I'd hoped after reading Shanty 2 Chic's inspiring details.

The stain on this bed is Minwax Provincial 211, and I used three coats of Minwax's water-based poly.

Best of all, my husband and I carried this bed from the garage, up the stairs, around the corner, and into a bedroom while it was fully assembled with legs. (He lost the bet on that one, saying I'd regret wood-gluing it all together ahead of time.)

This took about a week to complete.  I modify the original plan to include "built in" dressers and a night stand type of dresser.  The night stand has shelves built on the side.     Two beds were built of different configurations.  

I built a smaller version..THank you so much Ana for the plan. This one is only 2 ft tall and 22.5 inches wide..Perfect size for my 2 year old.
I added a hook to hang my daughter's doodle and on the other side, I added an aluminum tin(wrapped in a scrapbook paper sealed with mod podge) so she can put her magnetic letters/numbers on there. Added this little crayon holder as well. :-)

The ongoing saga of our cruddy old kitchen is finally over, for the most part. We attempted the quick fix and failed and now with a little time, knowledge and cash we think we finally got it right. Our ceilings are lower than the average house so we couldn't buy stock cabinets. We custom made everything and added some accessories. All thanks to Ana-White!! You are so awesome!!

For more photos etc... just visit:

http://buckleyjournal.blogspot.com/2013/07/kitchen-reno-redo-20.html

Built this from Ana's plans over a weekend and spent a few nights painting/staining/finishing. We decided to use a true quarter sawn red oak for the top. This is not a cheap wood (~$180) for the top alone, but I wanted it to be solid and thick. It is extremely hard so you will not want to use this if you don't have the necessary tools, like a table saw. It is usually purchased rough cut, which means the width can range in size by inches. You will need the table saw with a sharp blade in order to cut it down to matching widths. For the stain we used a General Finishers gel stain in Java from Woodcraft. That was followed with a General Finishers Gel topcoat. This is an excellent topcoat as we have 0 scratches in almost 6 months of regular use. My wife painted the base in a Cream Puff color from Behr I believe with a dark stain glaze, followed by a wax coat. This is a solid table that cost a fraction of what this would be in the stores. Most of our friends think we bought it! Thanks Ana! 

Thanks for another great plan! We wanted to replace our King sleigh bed with a Panel Headbord to free up some room in our master. Off to Pinterest I went to find a picture of what I wanted Hubby to build. I was excited to find that Ana-White had tackled this project because I knew there would be a great, well written plan to follow!

When I first found Ana's site, I fell in love with this project. I knew it was one I had to 'work up to'. I got a few projects under my belt and then I tackled this one. I am so pleased with how it turned out. No, it isn't perfect...but I made it :) Thanks for the great plans and inspiration Ana!!!

They were simple to make and the plan was easy to follow. The only modification I made was adding the 1x3 topper in place of the longer legs sticking out of the top.