Picnic Table
8’ x 3’ Table
8’ x 3’ Table
This was really my first build and it stemmed from not being able to find the kind of beds I wanted for my girls. My brother helped me cut the wood and assemble the first one and my husband and I did the second together. It was so rewarding to make them and I love how they turned out! You can store so much and they are sturdy pieces. My girls love them too. (bedding is from Pottery Barn) I would stay this is a beginner's project. You don't need any specialized tools. it was a lot of fun and now I'm it itching to buy a Kreg Jig so I can complete many more projects!
After making the Kendal dresser for my cousin, she ask me to build her the small farmhouse table to put next to her glider. I had to make it smaller to fit her space but the plans were so easy to follow and just as easy to make the adjustments. Ana's plans are user friendly like that.
I also made the $10.00 ledges so the little guy can have a place for his stuffed animals and books.
The stain I used was the same as the Kendal dresser so it all matched beautifully in the room. I think this is about the 40th piece I've made from Ana's website since discovering it in January of this year. Am I hooked? I'd say so! Great plans!
My next project will be the toddler seats painted like animals from Killer B Designs that were featured today. I love them!
bonjour j'ai réaliser ce projet avec du bois de charpente (récupération) , projet très facile à réaliser avec peut de matériel, le plus compliquer à été de transposer les dimensions de pouces en cm. est-il possible de recevoir des plans en cm ????
I made a few modifications from the original plans as I wanted to have some visibility into the cabinets. I used natural pine and finished with a tea, vinegar/steel wool solution to give it the reclaimed wood look.
Wed, 08/17/2016 - 23:42
Would you have plans available for the modifications that you made? This is beautiful!!
Mon, 07/22/2019 - 10:52
Do you have plans for the modifications you made on the doors? Thank you
Variation on the Farmhouse Table plans. Built from knotty pine and finished with Minwax Early American stain.
Followed the plans on the site but made it 3" wider to better fit our electronics.
I loved the junior loft bed plan and it was customizable and much cheaper than at the furniture store.
We ended up buying a thicker mattress than expected and adding an extra 2x2 with wood letters we got on sale at the craft store. Originally their was about a 5 inch rail over the height of the mattress and the letters made it more around 9-10 inches. We attached the letters to the wood first with glue and nails through the bottom and then screwed the board to the bed rail.
My 3 year old loves it!
I built these shelves in an afternoon and they were really simple. I'm fairly new to building and using powertools so these are quite an accomplishement!
Mon, 01/19/2015 - 17:13
Gorgeous! I love the stain! This is a beautiful project!
In reply to Gorgeous! I love the stain! by Ana White
Wed, 01/21/2015 - 06:04
Thanks so much! The hard part is picking the next project!
loved building this ! plans very easy to follow
I built this new workbench for my garage to accomodate my table and miter saw and to add some stowaway storage and I cant tell you how much I love it, especially with being able to pull the tables out to make an outfeed for the tablesaw. I altered theplans a bit to shorten the entire length by nearly 1.5 feet and instead of the board mounted tool space I added my bench vise to this gap and use shelved underneath for storage. The plan was simple to follow and allowed me to build a bench that all of my neighbors talk about now! Thanks so much Ana!
We LOVE our finished bed. We started out to make the Farmhouse Queen Bed but decided after completing the headboard and footboard that we wanted some storage with it. We made the frame from the Farmhouse Storage Bed plans without the actual drawers. We wanted a more open look to the storage. We are pleased with the way it turned out and love that Ana shares these wonderful plans online. Thanks again Ana!
My daughter and I built this out of the old framing that was pulled out of the house (fir) and some leftover wood from a friend's house build a few years back. If the cushions are lifted up you will see the old electrical wire holes! I shortened the set by one seat so it would fit the patio space. The cushions are from Ikea and fit perfectly. I also modified the coffee table so it was the similar proportion to the full sized set. Thanks for the very approachable plans Ana! Excuse the water all over the area in the pics. We have water dogs and they seem to like the sectional too!
Very easy. Thank you!!
Ripped a 2x4 down the middle for the legs and bottom rungs, so custom 2x2s. 1x2s for the mid and top. Biscuit jointed and edge glued 12x12 Hard Maple Top. Glue and pocket hole joinery.
I got the plans from Anna White $50 beginner farmhouse table build. Changed from a 6 ft table to a 5 ft. Built in a few hours but took longer to paint than anything because it took 2 coats.
Thu, 12/28/2017 - 16:23
Hi,
I really like the colour you chose! Did you use "SPF" lumber or something else? I am using SPF, so I am curious to see what the stain will look like once dried, etc.
Thanks again,
- Mike
Hi friends!
Jen Woodhouse from The House of Wood here.
After sharing my new dining room, I got a lot of requests for plans for my dining table, so I’m thrilled to finally deliver. The box joints on the legs add just the right amount of detail to this dining table, don’t you think?
Be sure to tag me @jenwoodhouse if you share photos of your build on social media. I'd love to see it!
You can get all the details for this build on my website jenwoodhouse.com
My first project where I made the whole thing by myself! My friend and I each loved this idea and so together we each made our own version! It was just what I needed for some bathroom beautifying in a small space!!
This was something I had always wanted to build for my nieces and nephew! it was a blast to build and see it come together. Two people working on this job is best. I loved the look of being able to open the doors top and bottom! I added the awnings above all the windows and doors to prevent as much water going into the playhouse as possible. The roofing was a little overwhelming at first but as we got going it turned out just fine! I wanted to lantern in the front to actually light up but I didn't want to run electricity so I got the lantern and put a motion sensor battery light on the inside and it works great! I also put one on the inside for more lighting there too, along with 3 battery "candle" lanterns. For the inside decoration I went with a wood land theme, put a growth chart on the inside wall to measure their height each year, and even made face masks! This is always and ongoing project for me seeing as how i'm always adding something new. The little ones love coming over and getting mail in the mailbox. Thanks Anna for the playhouse plans! I'm excited to see my nieces and nephews imaginations grow with all the possibilities the playhouse brings!
Thu, 09/12/2013 - 14:04
This is like the picture perfect childhood for me. I LOVE it. Great build!
Tue, 07/29/2014 - 14:04
So I had a hard time figuring out which house to build for my daughter and your house gave me such inspiration! I cannot wait to make this for my little girls 2nd birthday. She loves play pretend. Thank you for your inspiration!
Total cost $87. This project was very easy and did not take much time.
Since we don't have a garage or any really good place to keep our tools, they end up all over the house while we're working on a project. So, we decided to build a cabinet that would look nice in our house, and also house our tools. We chose the armoire plan because it has plenty of space.
This project took us forever, so it's hard to really estimate the actual working time. We began working on it back in June, then we were evacuated because of a forest fire.... By the time we got back into our house and we were organized again it was the end of July.... and now finally the end of August it's finished. It took us a while, but it's a great addition to our house!
We modified this cabinet by using 1/4 inch beadboard backed with 1/4 plywood for the doors. We also modified the size of the armoire to make it deeper.