Essential Adirondack Chair Two Seater
I followed plans from someone who modified the Essential Adirondack plan to make it seat two. It is a fun and quick build!!
I followed plans from someone who modified the Essential Adirondack plan to make it seat two. It is a fun and quick build!!
Thanks for a great plan! I've been procrastinating in posting, since I have plans to start blogging and wanted to link. Unfortunately, my blog remains a pipe dream as I still can't come up with a name.
The two long ledges were the ones I made (smaller ones are ancient.) These have helped me a great deal in my efforts to pull together/put my own stamp on the most awkwardly laid out and chopped up house imaginable! The 'in your face effect' created by my piling nearly every photo I own on them should be temporary - wall space will open up as other rooms get done. I do think they soften up the gigantic television (Ok, stop laughing. It was worse before.).
While the Ten Dollar Ledges were the inspiration for these, I didn't follow the instructions, since I have lots of leftover plywood and buying lumber when you live in the country and drive a VW Bug is not much fun. I'm very pleased with both the shelves and the garage space their creation opened up. There was a tradeoff, though, as it took me far longer than the hour or two each would have took had I used dimensional lumber. Four inch rip cuts are a pain! (especially since I was a bit too perfectionistic.) But I'm very happy with the results. Thanks again!
Sat, 01/21/2012 - 16:20
Hi - I am SO EXCITED - just made a $10 ledge! I have been wanting a photo/art ledge for a long time and actually purchased one from Pottery Barn which I returned. I hated the finish on it an found it very difficult to hang, not to mention that it was expensive! I had some idea how I might make one but wasn't sure, so went on line looking for instructions. So glad I found yours - it was really easy and looks great. The best part is that you can make it whatever size and finish that you want. Now i have to get busy making art to fill it! Thank you so much for your great ideas - i see quite alot of others on your site that I just might try.
I made it a little different, with a small door on the bottom as a little storage.
I loved making this for my kid, and as my first project ever I feel very proud of it.
I don't remember the exact amount of hours it took because I had little time to work on it (maybe 3 hours/week) so it took quite a bit of weeks to complete but it was really easy and fun! :D
I like how it's tall enough for my 2 year old to play standing, before we had a plastic one that was very very short, also it's sturdy enough for climb on it. xD
By the side I made a super easy, varnished, cupboard, following the same main steps from the stove, I only didn't put a front door and added on one side a towel holder and on the other side a small shelf/bar table
We've built so many of these coffee tables, but this one has got to be my favorite. Isn't the stain so dreamy?
I think the biggest thing about this coffee table is to finish it properly. We like to plane our boards down so it gives it a bit more of a seamless look - but real rustic lovers don't need to do this.
We sanded the coffee table down with 120 grit paper & then stained this table in Sunbleached Oak by Varathane. It's literally the most stunning color. Blends with almost any decor.
Once that was dry, we applied two coats of polyurathane
Elevated loft bed for my two boys! Easy build with the plans from Ana White! I modified this version and elevated it so I could fit my youngest underneath. It was my first time using a Kreg Jig and I’m obsessed now. I would recommend buying top quality wood and increasing all numbers by 2-3 inches to make getting the mattress in easier. I would also recommend a lower profile mattress than I used. Happy Building!
My first project using Ana White plans. Used pressure treated lumber and Kreg pocket hole jig. Cost: $126.
This was a fun and relatively easy project. Thanks Ana for all you do!
Tue, 01/24/2012 - 09:49
This is great. You did wonderful for a first project. I could see this as a kitchen island...Thank you for sharing...
I made this doll closet to go along with the canopy bed. It came out great! I put some pictures of the build on my blog.
I built this workbench in about two hours.
It is a nice, sturdy bench that I plan to use often.
For the top I used two sheets of 1/2" MDF.
I needed a solution to getting my bed back from my children. Since we live in a small apartment, this toddler bunk bed was the best option for our family! We are a military family so I wanted to build something that could be taken with us every time we move. The plans were easy to follow and has such a professional result!
Wed, 10/02/2019 - 18:10
Oh my goodness! I saw your project on Instagram and was hoping you’d share it here too! Thank you so much you made my day!
Not quite big enough for Pizza Oven, but love the plans!
Sat, 06/10/2023 - 07:25
Not quite big enough for Pizza Oven but love the plans!!
My wife and I did this table and stools for our son’s class art project. We did something similar last year and they auction the items off in a fund raiser in March. More details and information on the blog – www.atouchofarkansas.com.
Tue, 07/03/2012 - 09:03
Part of a class I am taking involves this particular subject and I am researching for information to use in an upcoming report. Your post is really helpful; do you have any others on this topic?
http://www.britecarpetcleaners.com/
This project took me a while to do just because I had to fit the time in to complete it. Plus I changed the stairs up from the plan because I didn't like how they turned out. They seemed to sag in the middle when you pushed down on it like a kid would when walking the dolls upstairs. I then tried the 2"X4" method suggested somewhere in the posts but that didn't turn out well either. So I searched online and found Wayne of the Woods website here: http://www.wayneofthewoods.com/dollhouse%20plans.html
Scroll down and find the stair plans I adapted to fit the dollhouse I built. I used scrap 1/4" plywood and 1 1/4" (I think) "L" trim/molding. I think I'm most proud of those stairs! :)
Sat, 12/21/2013 - 14:18
This is beautiful! It's exactly how I envision ours turning out when its done, but gender neutral. THANK YOU SO MUCH for the stairs idea, I really didn't like either other option.
Because we needed this coffee table for a small living room, we scaled the length down a bit from the plans. It worked really well.
My wife and I originally saw this Ana White planked sideboard and knew it was exactly what our dining room needed! We had the perfect spot for it! The plans were generally easy to follow and it was actually my first time installing drawers! It turned out amazing and we all love it! We love the added storage it provides for dishes and other kitchen accessories.
I built this project after my wife saw a brag post from one of Ana White's followers. She was excited to regain some of her kitchen counter space by moving the Keurig machine and Vitamix blender. The build was completed in a single weekend.
Living in a small house, 1100 sq feet, really needed an area devoted to DVD storage, then I thought, why not build my own Entertainment center? This is 1 of 6 pieces.
I altered the plans a bit so this would fit along the wall where we wanted it. I basically shortened the width of the steps. I left the storage under the hinged 1st and second steps but I put in a shelf style cubby under the top step. This worked out to more useable space for us. I used cheap wood and just plained them down. I think I spent around 300 dollars including paint. But I also used a full sheet of plywood on the back as well.
My second Ana project. Only modifications I made where to use 2x10 for side rails with a cleat system. Heavy duty bed rail hardware purchased from Amazon....Used 2 coat stain process followed with matte poly to finish
I built this project in 6 separate pieces before installing it in our home. I pulled the baseboard and attached it to the wall to give it a built-in feel. For the majority of the project, I used 3/4" plywood with the exception if 1/4" plywood for the back of the shelves as well as the centers of the cabinet doors. For the trim, I used select pine boards. I had to work around an airconditioning vent that was in the floor. I was able to divert it to run out the bottom of the bookcase.
This build is loosely based on the Willy Bookcase. I actually found another brag post on the Willy Bookcase that was immensely helpful in constructing my project. I'm so grateful for the brag boards! Instead of fixing all of the shelves like the Willy, I used a Kreg shelf pin jig to make the shelves adjustable. The shelf that lines up with the TV is fixed for stability.
The estimate below covers all of the wood, paint, screws, hardware, etc. For fun, I'm including an in progress photo to illustrate the process. Thanks for looking!
Also, a note - this is a relatively easy project, however, I listed it as "intermediate" because of the cabinet doors. They definitely made it more complicated!
Was in the market for another bed but the prices were ridiculous. Ran across Ana White's site and fell in love with all of the projects and decided to build it myself. It's been standing strong since 2020. Thanks for all of your knowledge.
Comments
Ana White Admin
Wed, 05/31/2023 - 16:29
Cool two seater!
Thank you for sharing, it looks fantastic!