Outdoor 2x4 sofa
We finally got our outdoor porch cleaned out and needed some additional seating. Loved all the different designs based on Ana's 2x4 sofa. Used Cedar boards instead of Pine.
We finally got our outdoor porch cleaned out and needed some additional seating. Loved all the different designs based on Ana's 2x4 sofa. Used Cedar boards instead of Pine.
I used this wonderful and easy plan to make a leaning hall tree for this awkward space in my dining room. Finally solved an 8 year old problem of what to put in this space! Thanks for the awesome plans!!
I wanted a kitchen table that was bigger than the one we had from Ikea, but the Farmhouse Table was too long. So we modified the length, left off the stretcher, and painted it a bright blue! The major lesson learned in this project was to be sure to store boards carefully. We bought the lumber, cut the boards, and then didn't work on the project for a couple of months. Even though the wood was in our garage, some of the boards warped a bit, leaving us with bends and curves to deal with once we started to build. Luckily, things came together, but there are many more imperfections in this table than would have been there if we'd built it sooner. But we still love it!
I used an all oak wood with a maple inlay on the table top to give it a different grain pattern and stand out a little more than just one type of wood. My wife wanted 3 shelves so she could display all our babies photos in our living room, toys on the bottom and odd storage in the middle. The way I figured to find the height of the second shelve was because we have a scentsy warmer and the basket we use to hold the scents I made to just fit under the table top. I also went with a fancier router-ed edge to the top which has three grooves instead of your normal round over or just square. I used a lot of kreg jigs to put this together and the two bottom shelves are free floating without a support beam. The way I did it made it really sturdy with clean lines on the peace. I sanded the whole project to 400 which made it feel like glass. If you would like to know more ask questions. I love to do this type of stuff.
Fri, 10/18/2013 - 01:46
I just finished a second, smaller version of this one for one of my friends who just got married. I also inscribed their names and date they got married on the bottom. I made it look like a carving in tree. It was pretty cool.
This is project #3 for me. Went together pretty easy. I originally made it for my living room but my teenaged daughter likes it so much she is begging for it to be in her room. She helped me stain it so I guess I will give it to her. I love Ana, I love the plans, I love feeling so empowered!
Built by Richelle Munro
"I love all your plans, and I have made quite a few of them now! This is one of my favourite! I used old barn wood for the top, and ship lap for the bottom and doors!"
60” round 1.5” concrete top.
No modifications to the base.
Used Behr water based stain (Early American)and wood conditioner.
Beyond pleased with the results:)
Mon, 11/08/2021 - 16:06
Thank you!! It turned out better than I had hoped. Now every time I see it, I smile. Thanks for the base plans🍻
This was our first project. My husband and I took the Farmhouse bed plans and modified them to look more like the Hudson Bed from Pottery Barn. This is a King size bed with removable side rails and under bed supports so that it can easily be collapsed for moving.
I love this table. I needed a little console table for my bedroom, and this was a prefect fit. It took me a day (not including buying the lumber), and it was fun to build. This was the 2nd project I have done, and I am really proud of it! (PS i found one on the pottery barn website that looks very similar for $600!) I spent about $50 on lumber, and already had the rest of my materials:)
Mon, 06/10/2013 - 16:05
Great job! I love that stain! How come you did not use pocket holes to attach the board so there would not be any visible screws? I love this table though. I saw the plans last week and want to build one next!
In reply to Great job! I love that stain! by Officer_Dad
Tue, 06/11/2013 - 08:11
Thanks! I like how the stain turned out too:) As for the screws showing...well.. I didn't want to buy any extra tools- and i have no idea how to make pocket holes yet haha. This is only my 2nd project. But I really don't mind the screws showing.
:)
It was a bit tricky putting it together in my limited space closet but I got it all done! Loving it! It also forces me to make up a capsule wardrobe and clean out my closet as there isn't room for everything. Thanks Ana!
A great one board project using some left over cedar that was collecting dust. Using a 1/2" round over bit I eased the outside corners as well as the drawer sides. I find that the drawers will slide easier with a slight round over applied. I left the cedar without a stain and two coats of satin clear.
Sat, 11/04/2017 - 19:29
Great job on this project! The router detail is beautiful, and the unique shaped pulls are awesome!
JoanneS
This was what I built for my daughter during quarantine! I had never used a Kreg Jig before and now I love using it!
I built the Full Storage Bed using Ana's plans! It was very easy and I love the storage space! You can see it and my modifications at our blog http://www.shanty-2-chic.com/2011/03/crates-for-storage-bed.html
I have been wanting to build this piece for some time now. This is actually a Pottery Barn piece that is now discontinued that I modified here and there. I added a "flipper door" which opens and slides back into the cabinet. Adjustable shelves throughout. I used solid alder and alder plywood for material. - Brad @timberandsoul www.timberandsoul.com
Sat, 05/16/2015 - 14:52
that looks great! I love seeing your brag posts! You make really great quality furniture. :) Hopefully one day I get to that point :)
- Used a router to cut a dado slot for the vertical boards to slide into the 4x4 posts so I would not have to screw them in from the outside
- Used a router to round over the edges to make the post toppers.
- Used router to give a shaped edge to the top horizontal planks
- I bought the finials for the post tops
Anna made it easy to build. I did change a few things to fit my dining room but I think it turned out great.
Thanks Anna
Shawn Roleson
Tue, 11/16/2021 - 12:29
You did a stunning job on this build, thank you for sharing!
Wed, 11/17/2021 - 09:52
Love the chunky legs on this table! Beautiful job, thank you for sending in a brag post!
These cost about 10 bucks a piece as she said. This was my first project. Not too bad.... obviously not perfect. But I learned a lot while doing this...
These took me a weekend to do... probably 6-8 hours.
When I took this I was still working on filling the ledges with photos... dont mind the craziness! :)
I scaled down the large rustic x bench plans to create seating for my grandkids at the new kid's table.
Wed, 05/20/2015 - 08:46
I really like that bench. Especially how beefy it looks scaled down like that.
I got the plans from Anna White $50 beginner farmhouse table build. Changed from a 6 ft table to a 5 ft. Built in a few hours but took longer to paint than anything because it took 2 coats.
Thu, 12/28/2017 - 16:23
Hi,
I really like the colour you chose! Did you use "SPF" lumber or something else? I am using SPF, so I am curious to see what the stain will look like once dried, etc.
Thanks again,
- Mike