Community Brag Posts

First piece of furniture every built. I added some quarter round and 1x4 blocks. Finished with a grey stain and paste wax. Everyone asks me is where did I buy it and how did I afford it.

I modified the factory cart coffee table plans to make a coffee table with a removable top for storage. The result was more Pottery Barn than Restoration Hardware. I put a piece of plywood on the bottom, to make an enclosed box. Then modified the frame under the 1x6's of the top, to make it fit snugly in the opening of the top of the box. The sides of the box were 1x12's I had leftover from another project. Actually, everything was leftovers, except the 1x6's for the top, and the castors. The 4 inch castors were painted flat black with high heat wood stove paint (also a leftover from refinishing our pellet stove). I used smaller castors, since the table was already taller than the original plans.

This was something I had always wanted to build for my nieces and nephew! it was a blast to build and see it come together. Two people working on this job is best. I loved the look of being able to open the doors top and bottom! I added the awnings above all the windows and doors to prevent as much water going into the playhouse as possible. The roofing was a little overwhelming at first but as we got going it turned out just fine! I wanted to lantern in the front to actually light up but I didn't want to run electricity so I got the lantern and put a motion sensor battery light on the inside and it works great! I also put one on the inside for more lighting there too, along with 3 battery "candle" lanterns. For the inside decoration I went with a wood land theme, put a growth chart on the inside wall to measure their height each year, and even made face masks! This is always and ongoing project for me seeing as how i'm always adding something new. The little ones love coming over and getting mail in the mailbox. Thanks Anna for the playhouse plans! I'm excited to see my nieces and nephews imaginations grow with all the possibilities the playhouse brings!

I included some pictures of very rudimentary drawings I did of all the cuts of wood you would need to build these if anyone wants to take a stab at it.  The drawings are rudimentary but you can definately build from them

Another idea I got from the kentwood posts.  Actually this was a brag from another user that got the idea from the kentwood nightstand post.  So I took to building it.  It is built out of solid pine.  For middle shelf and bottom shelf are cut from 3/4 thick plywood as my local store didnt cary pine large enough for the shelves and I did not feel like gluing slabs of pine together.  Though I ending up putting slabs of pine together for the top, because I wanted that to be pine like the rest of the nightstand.  I drilled a few pocket holes in each piece of pine.  Glued the edges and screwed them together with pocket holes which worked out great and I didnt have to clamp and wait for them to dry.  The inlay on the door is something I found at my local home depot.  It I glued it on and put a couple of pin nails around the eadges.

I finished the night stands with a cream white latex paint and glazed over the paint with valspar antiquing glaze which gave it a great ages grayish look.  Then sprayed it with a couple coats of Varethane Soft Touch Matte Polyurethane.  Which I dont recomend using.  I only used it because it was the only matte poly I had laying around.  If I were you I would opt for a much better poly to go over waterbased paint like General Finishes High Performance Poly.  The top I stained with General Finishes java gel coat and Gel coat poly.  I wasnt digging the way the gel coat looked on the pine nor did I like the color of the stain paired with the color of the nightstands.  so I have since then sanded off the gel coat and stained the top an onyx which to me looks a lot better.  Sorry I do not have any pictures of that.

Toy chest for our daughter.

My wife wanted me to build her a coffee table that looked like an industrial cart for about the last year. I saw this plan on the Ana White web site, and it was just what she wanted. The hardest part of this was finding the wheels for the cart.

I had this wine refridgerator that my wife gave to me years ago for a birthday and it really needed a home since it's been sitting in the corner of our dining room for several years.  After seeing some of the adaptations of the Printer Cabinet, I decided to try to modify if for my use.  I put pencil to paper and came up with a two sided design that would hold the refridgerator and all of our wine/bar glasses as well as some liquor.  It came out much better than I expected since this was my first real go at making any kind of cabinetry.  Measure twice, cut once really works.  I am eager to start my next project.  Thanks for the inspiration!

Ran on the wood through planer to get rid of that rounded edge stud look on the wood. Fun little project.

I had a friend doing a class for a church activity on refinishing furniture. I think she mentioned to our leaders that I build furniture so two weeks ago she emailed me to see if I would be willing to participate and take a little time to talk. I said of course, and then in my true fashion of loving a good get-together and having a tendency to overdo things, I said, "we could even do a little project too".

I went onto this site printed off 5 projects under $30 and let anyone that wanted sign up. I figured the easiest way to let people build a project in an hour and a half was to pre-cut and pre-drill everything (Thank you to my new Kreg jig that let me rock that part out no problem)

I ended up cutting and drilling for 26 orders!!! EEK! I was a little like a mad hatter running around helping people that had never even held a drill before (so please excuse the LACK of pictures, including none of me doing anything at all :( ) But I think it turned out awesome and everyone was so excited.

I just wanted to post this as a little tribute to Ana for all the amazingness that you are. Thank you for helping those scared to even start.

King Storage Bed with a built in bookcase as a headboard. Tons of storage space and turned out great especially at night.

I made these tables using the rutic x end table plans. The finish I found on shanty2chic.com

Just acute rustic X console table I built!

my first build

Happy International Talk Like a Pirate Day!

Thank you, Joanne, for designing this fun to build trunk. It enabled me to use pieces of odd scrap wood and a weathered old belt and make something fun and functional of them!

Followed the directions fairly closely except for a few things. cut down on the 2x2 supports for the 2x4. It kinda just seemed like overkill. Also, we added a block under the top and bottom of the 2x4 so I wouldn't have to screw in from the top. I wanted it to look more professional than that. The last thing I did differently was I used step dowels and a lot of wood glue to keep the 2x6s on. Overall I'm pretty happy with the result. I think it looks very good. Thanks for the plans!

This is my second woodworking project. I picked up this hobby with some spare time and with my tools that were collecting dust after I completed most of my home renovations. Cost: $80 wood ($35 just on plywood) $35 hardware (2 recessed handles and 2 drawer pulls) $20 finishing products $40 lego baseplates On the lego baseplate side, I stained but only poly'd just enough so that the border around the plates would be covered. Baseplates had to be cut in order to get the custom size I wanted. The "play area" on one side of the table is 20 inches x 13.75 inches. Each side of the table is made with three 10x10 inch plates. Two 10x10s are side by side. The other 10x10 was cut with a razor to make it into two 10 x 3.75 inch pieces. I cut the plates so that I always had a "smooth edge" on three sides. I affixed the baseplates with epoxy. Simply butting up the baseplates does not work as the gap between plates is too small. To get the proper size, hold the baseplates together with lego pieces. Wipe any excess epoxy with mineral spirits. (Note: I tried liquid nails first on a test piece. The glue heats up after application and slightly warped the lego baseplate. Not recommended). The "mom side" of the coffee table has two recessed handles. The handles on the "lego side" are made with lego bricks. I drilled a tiny hole in the lego bricks. I threaded 50 lb fishing line through the lego brick to the hidden recessed area of the "mom's side handle" and tied off the line in there. Project took me over a month of time (probably 20-25 hours of labor). It could have and should have taken less, but I'm a newbie and am very cautious with my work.

Chevron kids table