Community Brag Posts

This is my first outdoor furniture project, learned much from Ana's plan and my own mistakes. Used Cedar as material which total to ~$500 and ~$200 on cushions found as discontinued items from AtHome.

Projects
* 2x4 Outdoor Sofa https://www.ana-white.com/woodworking-projects/2x4-outdoor-sofa
* Essential Wood Outdoor Chair https://www.ana-white.com/woodworking-projects/essential-wood-outdoor-c…
* 2x4 Outdoor Coffee Table https://www.ana-white.com/woodworking-projects/2x4-outdoor-coffee-table
* 2x4 Outdoor Side Table https://www.ana-white.com/woodworking-projects/2x4-outdoor-side-table
* Modern Cedar Outdoor Storage Bench https://www.ana-white.com/woodworking-projects/modern-cedar-outdoor-sto…
* Tongue and Groove Ottoman Tray https://www.ana-white.com/woodworking-projects/tongue-and-groove-ottoma…

I took the Tryde coffee table plan and made it taller and wider to fit our dining room space! It turned out way better than expected!

We built this bed actually from a few different styes from this website. We didn't really like the cut out that much - but we loved how low to the ground it was. So we combined the farmhouse bed, with this bed with a west elm bed to come up with this style. I can be happy to say we've sold over 40 of these beds from Double - Kings! We use 2x3" slats for the base. Super strong! Our frame is made out of 2x12's and then the headboard is attached to the base. This is our personal bed & we're so in love with it!

I made this bookcase out of solid hard maple lumber. The project was more expensive because I chose to use this wood. It also took more time because I had to do a lot of sanding in order to finish it with shellac and paste wax, but I think it was worth it. I altered the plans and made the bookcase 5' tall instead of 6' as it would have been a little large for the room I put it in otherwise. I used a kreg jig to create pocket holes on the undersides of the shelves so that I did not have to drill and make holes on the sides of the bookcase. I also used L and T brackets on the back to hold the whole thing together.

I combined the full-sized Hannah canopy bed plans with the Farmhouse Storage Bed with hinged footboard by birdandsoap here: http://ana-white.com/2011/07/farmhouse-storage-bed-hinged-footboard . Decided not to taper the ends of the 2x3s. There's so much storage underneath!

I gave away my outdoor furniture in need of something for that space.  This plan is perfect with added outdoor matress and Curtains so I can lay down on the summer.

My granddaughter wanted a lemonade stand and it had to be easily portable. I used Ana White’s plans, made it a little taller (30” counter height, 65” total height), added hinges so the top drops down, and wheels on the back side so you can tilt and pull it behind you like a suitcase. Added a hook for a cutting board and hooks for a bungee strap to hold the cooler, pitchers and supplies inside while you haul it. A sign for her and sissy, some painted wood decor and we’re all set. Just add lemons!

Our friends and my co-worker, Tommy & Susannah, got married back in November and for their wedding gift I said that I would build them a coffee table. They liked the look of my original one that I built but wanted is square like the one I did for my sister. However, their living room space was not that big, so they wanted scaled down version. They wanted it 2 1/2' x 2 1/2' and similiar in color to the ones that I had already done.

Not to be say how cheap I got the wood for their wedding present, but the wood for this was not very much at all. Especially since I got the 4x4's in the culled wood bin for $1 each, and only needed 2! Total cost of wood was $17.50! Add in the screws, stain, staining materials and you are looking at around $30.00 max. Now my labor for this project was priceless, so was very expensive wedding gift!!!

As an Ana White newbie I was excited (to say the least!) about my first real project.

It was also my proving ground. My Hubby said that if this went well, I could feel free to build an office desk... pergola... coffers in the dining room... whatever! He was floored and impressed beyond words!

I have included a before picture of our entryway and also a view from our front door, so that you can see how much of a presence this has in a room. I love it absolutely!

I made mine a bit deeper in the seat (about 20") because my husband has size 15 shoes that needed to be hidden. I also added a shelf for more shoes (which was easy and also where I tried out my new Kreg Jig). That tool is pretty darn sweet!

I decided to use hefty planks for the seats as well and reinforced them with a bit beefier legs, as my husband and his family are all nearly 7 feet tall. (just in case - you know!)

Mine is a bit shorter in length than Ana's... but all in all pretty similar. These pictures don't show all the holes filled in yet (as I ran out of putty) but that will be done next week. It looks pretty polished where I have filled them in though - paint is a wonder at hiding things.

My tearful thanks to Ana for making this seem so completely "do-able" for a woman! I was feeling pretty low before building this - but I have to say that working with wood is a REAL confidence booster and it feels so satisfying when you see the finished result. The JIG is a bit intimidating till you get used to it - but then it's so cool! Love it!

I started this on a Sunday night and finished on a Wednesday night.

I will be building again very, very soon!

My wife wanted a built in shelving unit for all of her Fiestaware.  I couldn't find anything that worked so I looked for large hutches instead.  I found a nice design on Ana White and saw some other modifications from other posters - came up with what you see here.  Turned out well.  I never worked with Blum hinges before so that was a learning experience.

this is a staple of mine, one that I love and my nieces do too. Every time a niece, so far 5 have got them, I have them all ready, built, sanded, primered, and an activity that we do together, is paint the beds whatever color the girls want. They love it, we also sew a mattress, 2 pillows, and they get a crochet blankie to take. Really great bonding time! Also made 2 for the make one, take one campaign of Ana's. These are the cutest, sturdiest beds I've ever seen. And yes, every niece has climbed into their beds to "test" them out :)

Great plan!! Easy to build and very sturdy. The only modification I made was to use 1x8's for siderails and raised the frame about 3 inches to make more room for storage. Thanks!!

So this project took quite a while for me to finish, but I didn't cut any corners and expanded a bit on the basic plans that were offered.  Some notes on changes to the project:

• Instead of leaving the gap in the bottom and middle shelves, I used a second 1x10 and ripped it down to the exact width I needed so that it would be flush (this was done for the bottom shelf and the middle shelf.
• I added 3 supports in Step 5 at the back to provide additional support for the middle shelf.  
• For the top, instead of 2 2x10's, it is 3 2x8's ripped down to 6.25" each, then edge glued.  A brace was then added to the bottom and used to attach the top to the main unit.  See the pictures for a better description.  
• I also edge glued the doors out of 1x6's in order to get the dimensions I wanted.
• I used a 1x3 at the bottom to give it more of a sturdy look
• OK, so the big part that people complained about the original plans were the lack of information on how to do the rails.  I cheated and contacted a metal fabricator to make them for me.  Pricing was consistent with what you would find online for similar barn door hardware, but it definitely turned out better than me trying to do it myself. 
• The stain is Minwax "provincial" and I used a wipe-on poly to coat it.  For the top, I used 400 grit sand paper between coatings, and let me tell you, you can see your reflection in the finished product.  Turned out really well!
• My only regret is that I used project boards for the two end pieces, and so they don't quite match the remainder of the project.  I would have edge glued them just like I did the doors given the chance to do it over. 

Anyway, enjoy!

I love this design and have made several for family and for sale. This was the one I made for Ana's promotion, Make one, take one. This is the one that was given to charity, Wings. this is a house in our area for battered women and their children. As an ER nurse who sends patients there, I realize the importance of a well made doll bed, (Doll given as well) 90% of the time these kids have to leave their homes with nothing, no toys, no clothes, and I hope seeing this doll bed would help some little girl forget about the trauma she's been through, if only for a little while, and let her be a little girl again.

Started by making these bunk beds for my 9 year old and then I made another for my 6 year old. I couldn't help myself, so I made 12 more for other people to give as Christmas presents. Thanks Ana!