Community Brag Posts

Fancy X Farmhouse Table

Submitted by Loaded918 on Sat, 03/14/2020 - 12:01

This is my first big project. It took about 5 days with the help of my 3 yr old little boy. I made a couple of modifications. I took the size down to 6 ft to fit our current dining room. Essentially I just took 24 inches off of the table top and the long cross braces. For the diagonal cross pieces, I just clamped the wood on the side and marked where the cut was needed. Somehow though, I ended up needing 8 2x4’s... It turned out a lot better than I expected. Although I wish it was explained how they attached the table top. I ended just screwing in from the top. Wish there was a way to avoid this, and the ensuing shown screws, but it will do for now!

Built from Plan(s)
Estimated Cost
~120
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Dark Walnut
Recommended Skill Level
Intermediate

Playhouse loft princess bed

My daughter was turning 4 and we were expecting our 2nd child in a few months and needed her crib/toddler bed back to start setting up the nursery. After googling fun big girl beds for a few weeks i came across the plans for the cottage bed and decided to sit down with my husband and decide if we could build her this bed. by building instead of buying the bed of her little girl dreams we were creating many fond memories with her and a real attatchment to it so she would actually sleep in it. We went through alot of the other brag posts first and picked out a few things we liked from each and made a few modifcations. I felt the spindles around the bed needed to be taller to keep her from falling out of the bed. We also made a door way under the slide that is now a little secret fort for her to go in and read her books and have quiet time. Under the steps my husband made a closet for her dress up clothes utilizing as much of the space under the bed as possible as it takes up most of her bed room We painted the back wall under the bed with chalk board paint to give her a art space under there as well. In the end it took us about a month to build the bed working on it on the weekends. We spent around 500 dollars including the purchase of a few tools we diddnt have and needed like the kreg jig and all the paint and princess decals. She loves the bed and my very amazing handy husband has been approached by many friends and family members to make one for their children as well.

Built from Plan(s)
Estimated Cost
500$
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Valspar paint
Recommended Skill Level
Intermediate

Comments

birdsandsoap

Sat, 05/19/2012 - 19:37

I love the little valance over the window, it looks so cozy. You've got one lucky girl. The picture with all of the princess dolls on the steps is adorable.

Rustic X Book Case

Submitted by Casey R on Mon, 03/03/2014 - 09:33

I wanted to build something a little bigger than the Rustic X Console table. So my wife and I came up with the plans for this 5 shelf "Rustic X" Book Case. Took me about 20 hours to build over a three day weekend.

Estimated Cost
$120
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Rust-Oleum Stain Onix
Minwax Helmsman Spar Urethane
Recommended Skill Level
Intermediate

Comments

HuskyBlue

Wed, 04/16/2014 - 08:18

What dimensions did you end up using?- the proportions look great! Even the shorter legs look great! And did you just use 2x6's for your trip on the top? We would love to follow your design to a t!

HuskyBlue

Wed, 04/16/2014 - 08:37

We were thinking of increasing the overall height to 84" and the width to 48" (keeping the depth) but weren't sure if that would mess up the ratio.

Bown

Tue, 08/27/2019 - 17:53

I think your looks much nicer than the original due to the finished top. It looks complete with the way you've made the overhang. How much of a overhang is it? 

I love the rustic x console and coffee table but hated the bookshelf due to the odd looking top, thank you for your inspiration! 

Geo Dresser

Submitted by Anonymous (not verified) on Sat, 11/04/2023 - 14:44

Bedroom dresser made from Ana White’s plans! Absolutely love it and it was easy to build!

Kristen Kobeszko

Rustic X Console Table

Submitted by jwerne2 on Wed, 03/05/2014 - 12:55

My husband built this Rustic X Console table to plan. We love it so much he is now building the coffee table and end tables to match (and I may convince him to build the bookcase too!)

Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Rustoleum Dark Walnut, wipe on satin polyurethane, furniture wax
Recommended Skill Level
Intermediate

Alexia Bench modified

Submitted by rkyount on Sat, 06/04/2016 - 15:35

This was a very quick and easy build that was completely finished in an afternoon. My Kreg jig was loaned out, so I have exposed fasteners, but I prefer to let them show instead of filling the holes. I built this with 20" legs to make it a little taller and more comfortable for my height. I also prefer straight lines and angles, so I changed the trim pieces a bit to suit my style. The hardest part was getting the drawer slides lined up. The finish is Rustoleum Heirloom White with a coffee colored glaze. The picture makes one drawer look darker, but it's really just a shadow. I'm in love with this project!

Built from Plan(s)
Estimated Cost
$65
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Rustoleum Heirloom White with a coffee colored glaze
Recommended Skill Level
Beginner

Modular Desk System

deskMy home office remodel was inspired by a post from Ana White a few years ago. For this project I ended up using IKEA bookshelves and cutting the tops off and flipping them upside down. I used some crown mounding to cover the base of the cabinets on the tops. The desk top bases are file cabinets I found at the office supply store and the desk tops are edge glue pine. Overall I think I only had to make 8 cuts for the entire project. Saving me a ton of time and money. Thank you Ana for all of the wonderful post!

Mark Danreiter on Facebook

sandbox

This is the first thing I have ever made out of wood in my life! I'm a quilter, I have never even used a screwdriver, but I followed your plans exactly and made this for my grandchild! I am so proud of this sandbox. (I did talk the guy at Lowe's into making the woodcuts for me).
Thank you so much for this plan and thank you for making it so easy to follow. Sherry

Built from Plan(s)
Estimated Cost
$60
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
was told to wait to paint for six months because pressure treated wood needs to dry out
Recommended Skill Level
Starter Project

Kendra Side Table

Thanks for the GREAT plans. Slightly modified to allow more space on the top shelf.

Estimated Cost
40.00
Estimated Time Investment
Day Project (6-9 Hours)
Recommended Skill Level
Beginner

Comments

Linda7

Sun, 03/09/2014 - 15:23

Lauren,
They are found on this site called the "Kendra Storage Console". Click on "plans" in the tool bar above, type in that title, then hit "apply." The original plans will pull right up.

JoJo Lynn

Thu, 01/29/2015 - 20:01

I too was looking for the plans on this and i clicked on plans but when i entered Kendra Side Table it came up as no results found. Is this not the name listed above? Am i doing it wrong?

Jodi

Queen size farmhouse bed with storage

Submitted by fdfp84 on Wed, 06/08/2016 - 17:11

I made the bed  from the plans on this site, I made the drawers using a dovetail joint.Took a little longer because of that. 

Estimated Cost
cost was around 350.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Beginner

Comments

Fireplace Mantle

Submitted by advanlente on Sat, 03/28/2020 - 11:37

I really wanted a mantle to hang our stockings and to have some decorations. When we moved in there was just a shelf above the fireplace which was fine but I wanted to make more of a statement. This was a pretty easy project after all of the math was calculated. I made to follow guidelines for the fireplace as well. Thanks dad for that :)

Tryde Coffee Table

Submitted by JHughes on Sun, 05/27/2012 - 15:00

Tryde coffee table pattern with added magazine rack. We used pallet wood which was sanded but still retained it's rustic appearance. Dark walnut stain was used to finish!

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Dark Walnut Stain with Satin Polyurethane
Recommended Skill Level
Intermediate

Comments

Armless Sectional Bench

Submitted by seaweed805 on Wed, 03/12/2014 - 21:14

I built four pieces of the sectional (1 corner, 3 reg) It took me a long weekend, I would come and go so actual hours are hard to estimate. For the stain I used steel wool and vinegar, followed up by strong black tea. Teak oil was used for the sealer. The second photo is a picture of one stained chair approx 30 mins after stain applied, the other one has no stain yet. The pillows I sewed myself, outdoor fabric is from Jo-anns (use the coupons!) and inserts are from ikea. The only large investment were the cushions! Pine Wood - FREE. My dad works for a lumber company. Outdoor fabric - Between $6 and $10 a yard Pillows - $3 for small, $6 for large Cushions - $29 each **my picture wont display correctly even though uploaded correctly!!!

Estimated Cost
$200
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Steel wool and vinegar, followed by strong black tea. Finished with teak oil.
Recommended Skill Level
Beginner

Comments

Full Size Storage Bed

Submitted by duchamp6 on Sun, 06/12/2016 - 20:57

My daughter turned 10 this week and we did a room makeover for her birthday. She is in LOVE with her new space. She has been sharing a bunk with her 6 yr old brother. We told her when her 2 yr old brother climbed out of the crib that she would get the baby's room and the boys would then bunk together. Well, he climbed out as they ALL do. 

Built from Plan(s)
Estimated Cost
$75
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
I used Behr satin finish white with primer and applied it with a sponge.
Recommended Skill Level
Beginner

Comments

Rustic X Coffee Table

Submitted by B.W.Martin on Thu, 04/16/2020 - 20:46

I used the Rustic X Coffee Table plan to make a living room set. I added a 3.5" deep lift top storage area out of plywood, and also used plywood on the bottom of the table as well instead of 1" by 12".

Built from Plan(s)
Estimated Cost
$50
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
I used an eggshell antique white for the paint. I used a minwax pre-stain, one coat of minwax honey stain, and two coats of minwax polyurethane.
Recommended Skill Level
Intermediate

Modern Farmhouse Entryway Console

Submitted by Anonymous (not verified) on Sat, 11/18/2023 - 12:28

Built 2. Stained one Briarsmoke the other to be determined. Thank you Ana for the inspiration and plans!

Tim Basoco

Comments

Joss' Big Boy Bed

My building write-up goes with the post for the plans. The only thing I need to add here is the change I made on the toddler rail. The first one I did wasn't quite long enough for my little guy. He's quite the squirmmy bug at night, so he kept slipping off the bed with the shorter one. He never just really fell hard, but it was enough to wake him up a few times, so I added a little more length to the rail and it seems to be working much better. I'm excited to see how this bed will evolve :) Hoping to make a few additions to it a little further down the road!

Estimated Cost
$450
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Distressed a few shades of blues and greens of interior flat paints. Wiped on a light coat of a satin poly for the top coat.
Recommended Skill Level
Intermediate

10 Cube Shelf

Submitted by john.h on Sun, 03/16/2014 - 18:38

Expanded the 6 cube shelf to 10 cubes, beefed up the feet a little and fancied up the top to more closely match the picture in the plan page. Just joined a couple 1x8's and cut to length for the top.

Used the Kreg Jig to make the shelf box and face frames - biscuit joiner for top.

Built from Plan(s)
Estimated Cost
150? had some leftover material and spent a little extra on finishes.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
primer/spray paint
Recommended Skill Level
Beginner

Comments

rwkaupas

Wed, 11/26/2014 - 05:32

Hi John- this is exactly what I'm looking for- did you by any chance save your modification measurements and cut list?  Also- I'm considering putting a 50 inch tv on the unit- would you recommend additional support?  Thanks for any help.

 

Back