Handmade pedestal farmhouse table
Modified slightly to include just two legs and excluded the decorative pieces for a more streamined look.
Modified slightly to include just two legs and excluded the decorative pieces for a more streamined look.
I started this project by using the mini Farmhouse side tables plan. I added my own herringbone detail on the top that turned out pretty cool. I finished with Italian brass hardware and put a sleek satin Old Masters finish over the whole thing. It's a lovely piece that I really enjoy.
A few alterations to plans….thanks for the inspiration!
For these beds I modified the original farmhouse doll bed plans to accommodate a few more dolls. In the process, I discovered that, while doll furniture turns out SUPER cute, it takes me about the same amount of time to build a little piece as it does to build a big piece, especially when you consider the time it takes to sew the bedding.
I put these together mostly with nails and glue, but used my kreg jig to join the rails to the headboards and footboards.
Wed, 12/14/2011 - 23:05
Hillary you are so inspiring and talented!!! Love!
Thu, 12/15/2011 - 06:00
I love the mods you did on these. For the farmhouse w/trundle, I know you had to raise up the bottom and it looks like you did the headboard sized boards for the footboard and made the headboard w/even longer boards? Then for the bunkbeds, are those all headboard lengths for the head and footboards and then just very long 2x2s for the posts? I am never brave enough to mod anything just yet! I also absolutely love that bedding on the top pic! So bright and cheery!
In reply to Great job! by spiceylg
Thu, 12/15/2011 - 06:51
Isn't that bedding beautiful? I love it. The fabric is from Hobby Lobby. They have so many cute calicos.
Yes, you got the mods right. If I were to do the trundle again, I'd make the headboard longer so that it goes almost to the ground like the footboard, otherwise you can see the trundle.
The bunk was easy -- much easier than the other bunk plans all out of 1x2s. I've made them both now and the farmhouse one just comes together a lot faster (once you figure out the measurements).
Thu, 12/15/2011 - 09:57
I love Hobby Lobby but never think to check out their fabric! Silly me, I'll have to do just that! Okay, thank you for the info. I just noted the additional detail of the feet, how nice! If you don't mind, I'd love the measurement of the 2x2 for the bunks, simply because I'm lazy like that, lol!
Thu, 12/15/2011 - 10:27
The 2x2s are 22 3/4" and the slats in the headboard are 7". I think the bottom of the bottom headboard is around 2 3/4" or 3" from the bottom of the 2x2s. All the width measurements are the same as in the original plan. Also, I used lath strips for the mattress to rest on instead of a rectangle of 1/4" ply -- it seemed easier and I think it was cheaper, too.
Fri, 12/16/2011 - 08:00
You are so right about the time it takes.
I made a stuffed doll and her clothing for a niece, and I could have made myself two complete outfits in the time it took to sew one dinky doll dress.
Tue, 02/28/2012 - 07:40
Hillary how did you do the trundle for the farmhouse single bed. I read where you said you would do the headboard longer,but this is going to be my first build and I need a little more instruction to make the trundle and how long would you do the headboard. Thanks!!!
In reply to Trundle by lmhaney (not verified)
Tue, 02/28/2012 - 09:05
Hey. I made the trundle using 1x3 boards just slightly shorter than the size of the overall bed (so it would fit underneath). I used two 18 1/2" 1x3s and two 14 1/2" 1x3s. I built it using pocket holes on the 14 1/2" 1x3s, screwing into the 18 1/2" 1x3s. Then I attached two 1x2 cleats to the bottom insides of the 18.5" boards so that I'd have a place to set support pieces for the mattress. I attached the cleats with glue and nails, I think, but pocket screws would work fine, too. I used pine lath for the support, attached with glue and staples.
For the headboard, I cut my panel pieces at 7", I think, but I should have cut them at 9 3/4" so that the headboard panel would extend closer to the ground like the footboard panel does. Here is an abbreviated cut list:
footboard panel -- 5 1x3s @ 6"
footboard legs -- 2 2x2s @ 7 1/4"
headboard panel -- 5 1x3s @ 9 3/4"
headboard legs -- 2 2x2s @ 11"
All of the horizontal cuts are the same as the original plan as long as you are using #1 pine. If you are using #2 pine or furring strips, your horizontal cuts will need to be slightly smaller b/c your panel board will be slightly narrower than the plans expect.
Just be sure to screw the side rails of the bed in high enough to get the trundle underneath.
Hopefully that all makes sense! Good luck! Can't wait to see photos!
Sun, 08/05/2012 - 04:04
You think that the hardware store will cut all the peaces for me?
In reply to You think that the hardware by Aida (not verified)
Sun, 08/05/2012 - 06:29
They -might- cut it for you. But based on the experience of a lot of people here, and the advice of some Home Depot employees also on here, it's a mistake to have them do that.
You can do the cuts on your own though. If you can't afford a circular saw, or you're uncomfortable with them, you can buy a hand saw for about $25. It's no good for cutting plywood or MDF, but for solid wood it's hard to beat.
Mon, 08/06/2012 - 19:26
Nope, I don't think they will. And if they did you won't be happy with the outcome. Too many cuts and there's no way they'll get every cut right. You'd be better off finding a friend with a miter saw you could borrow for an hour to get all the pieces cut. Good luck!
Sun, 08/12/2012 - 08:27
Thank you........ I may have to stop been afraid of using this tools and just use it lol............love this bed and my daughter want me to make it for her........ I will post pictures
Tue, 10/29/2013 - 08:53
Just curious if you have ever thought of making these and selling them?? I have been looking for a doll bunk bed for my daughter for Christmas and love this bunk bed with trundle. So thought I would ask if you would consider making one and selling it!!
Sun, 12/08/2013 - 18:07
I absolutely love what you did with the trundle and the bunk bed. You are so talented! Thank you so much for sharing the measurements that you used to make the bunk bed and sharing tips. I am going to attempt to make one for my daughter. This will be my first woodworking project. I am crossing my fingers it goes well. Thank you! :)
I needed some new chairs for my kids play room as the ones that came with a table they received as a gift were cheap and I had reinforced them three different times.
I liked the simple design of them and the cost is right! Mine were a little more as I used 2x2's for the legs and made the body of the chair double-braced as my boys are hard on things!!
My boys picked the colors, which the blue was left over from a room and the red from my older son's desk!
This was a Christmas gift for my youngest grandniece. The doll crib is made from the Fancy Doll Crib plans, slightly modified to be taller and longer. The high chair is made according to plan, except I substituted a 1" x 6" board for the back.
Still need to stain but this was my very first project and it turned out well! The directions are very easy to follow and I am very happy with it!
So...we are 6 people in a 3 bedroom house. We needed more room! Thanks for the inspiration Ana. I think these beds turned out GREAT. And the girls love them!!!
Sat, 04/08/2023 - 15:37
Love what you came up with, plus extra storage! Thanks for sharing.
I made these for my two nieces and soon to be born daughter for Xmas. I used 1" hobby foam for the mattress.
Mon, 12/19/2011 - 14:52
Love the beds and the bedding is super cute! I bet your nieces will love their Christmas present!
Mon, 12/19/2011 - 16:54
Thanks, I hope so too!! Maybe next year I'll make your bunk beds for them!!
I used Ana's sawhorse plans and painted the sawhorses black. I made up a plan for the desk top inspired by some of the farmhouse table plans. The top looks very thick and chunky, but is mostly made from cheap 1x6 boards put together with glue and pocket holes. The ends of the top are made from 2x2 boards attached with pocket holes. The sides are from 1x2 boards - all attached with glue and pocket holes.
For the finish I used a water based stain from General Finishes - Black Cherry. I started with one coat of poly-acrylic and did not like the look. I sanded it back and bit (distressing the edges a bit) and put on two coats of wax.
Just like my previous post on the nightstands, It was cheaper to build a bed that I envisioned instead of searching for something over priced. I found the plans for this bed on the site but made the headboard a little over 6 feet tall. This came out amazing and really compliments the nightstands. I also built the sconces that are centered over the nightstands to keep the tops of the nightstands clean and not cluttered. They also have touch pads for the lights mounted behind the bed to make them easy to turn on and off.
This is hands down the best transformation in any room in my house. Ana, you saved me a ton of money with DIY. I even picked up most of the Kreg jigs along the way which is an added bonus!
Tue, 07/09/2019 - 10:09
What a gorgeous room! The bed is just stunning in the space! Those nightstands and lights are perfect. Thank you so much for sharing brag posts!
In reply to What a gorgeous room! The… by Ana White
Fri, 07/19/2019 - 11:39
Thank you so much! I need to thank you for the plans!
I built this for my little girl for Christmas. I think it is one of the cutest $20 presents I have ever gotten her.
Thanks to my sister in law who made the bedding. I also placed felt squares on each corner to make sliding the drawer out of the wood floor a breeze.
Wed, 12/21/2011 - 20:11
What a lucky little girl to have a momma (or dad??) who can build her such a cute gift. Great job.
Tue, 01/10/2012 - 08:49
Sorry it took me so long to get back with you. I got the plans on Ana-white.com all I did was search for doll furniture.
I started with the doll farmhouse bed. Someone made a super cute version as a dog bed- and I loved it as a mini sofa...
Tue, 12/31/2013 - 09:53
Hi Brad- so sorry for not getting back to you sooner. I saw that you'd left a message, and I haven't had a chance to get back into the shed to check- The seat is only about 5 inches off the ground, and the backrest is about 17 inches.
I hope that helps!
I love this table! On cool winter mornings we fill it with warm water. The built in umbrella stand will be essential once the Texas sun comes out.
Hopefully it buys me some free time to finish some projects!
I already have lots of requests to build more of these for friends and family. I have some edits in mind to make it a little faster and easier next time.
Many thanks to Ana and all the contributers for all the inspiration and tips!
Pretty blue painted finish on simple bed
"Here's a pic of the planter I made! I modified it to fit a 36" planter. I LOVE it. Thanks!!"
Farmhouse style doll beds modified width one less slat.
When I first saw this project I thought it might make a great looking table for our dining room - however after seemingly endless frustration with the 2x10s (and also 2x4s I tried after giving up on the 2x10s) badly warping I eventually gave up and bought a couple of pre-glued pine board panels to use as the table top. I had my heart set on a nice flat dining table and the construction boards just weren't working for that. The base was still made from basic pine 2x4s as per the original plan however.
I shortened the table by about 2 feet so it would actually fit in our dining room, removed the inner angled boards because getting the angles right after shortening the table was being a pain, and added a couple of support boards that run lengthwise under the table top since it's thinner than originally planned.
This project seriously took me about 2 years to make, between all of the re-starts and so on.
Tools used include circular saw, belt sander, orbital sander, router, power drill with pocket hole jig.
Not counting wasted materials, this project probably cost me about $120 between the lumber, the hardware,the stain, the finish, etc.
After all that work and hair-pulling though, in the end my wife says she loves it, so I guess that's all that matters :)
My wife's cousin builtthis table using your plans and we loved it. I wanted a lager table, so I made a few modification. The table top is 5 8 ft 2x10's. I love the finished product. More importantly, my wife loves it! Thanks for the plans!
Combined the 2x4 sofa and 2x6 chair plans. Added the extra 2x6 under the arm rest, to keep future pillows from falling through the gap. Great plans! Thanks!
Mon, 07/22/2019 - 11:54
Love this! The 2x4 arms are so much better too. Thank you for posting!
Wed, 08/14/2019 - 23:38
Thank you! Actually added another couch, two side tables, and a ottoman to match! Looks like it came out of a magazine! Planning on doing one of your bedframes next. Love your site!
Mon, 12/21/2020 - 12:04
@papadog - I love your build and the way you iterated on the plans to make it work best for your specific needs. I'm in the process of building off these plans myself, and the one thing I cannot figure out is how the base of the back is intended to be secured to the sides. In the plans (step 7) it just says "secure to the sides using 2 1/2" screws". Am I supposed to drill from the outside of the sides into the back base? I'd like to avoid that, and based on the pictures, it looks like you have. If you can share how you secured the back base to the sides for your build, I would be very grateful.
Tue, 01/10/2023 - 10:24
So sorry, didn’t know there was a question/response to this! I didn’t secure them. Hasn’t been an issue.