Community Brag Posts

Kids table and chairs

Great little project. Finished just in time for Thanksgiving.

Andy

Estimated Cost
50
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Mirrowax, polyurethane semi gloss
Recommended Skill Level
Beginner

Comments

JoanneS

Thu, 11/26/2015 - 07:14

You did a super job!  These are absolutely adorable!  Happy Thanksgiving!

Hidden Puzzle Table

Submitted by Anonymous (not verified) on Fri, 03/10/2023 - 12:02

I wanted a table that would protect my puzzles from puzzle piece eating dogs, so I used this Ana White desk plan and built a frame on top to hold the cover panels. The drawer is perfect for holding puzzle pieces during a build.

Comments

Red Oak Headboard with Herringbone pattern

Created a headboard for my guest room bed.  Used red oak slats to create the herringbone effect and regular red oak boards for the frame and legs.  Natural shellac and sealer used as the finish.  No real plans used, but can provide the dimensions to anyone who is interested.

Estimated Cost
$250
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Bullseye Shellac and Sealer (clear)
Recommended Skill Level
Beginner

My fireplace

Submitted by Anonymous (not verified) on Fri, 03/24/2023 - 12:59

My wife wanted a fireplace in our main living room, then we added the shelving on each side

Comments

Outdoor hangout using 2x4 and fence boards

Submitted by sylvialh on Sun, 06/16/2019 - 18:13

Bought enough lumber for one sofa but ended up using old fence boards for the  decking so had enough lumber to make the sectional and a shortened coffee table. 

Great way to save some cash even if u have to buy the fence posts. 

Added a reinforcing piece to the one armed sofa between the legs using a kreg jig to stabilize the legs a bit more. 

Waiting on my foam from Amazon to finish off this project!

Used inspiration from the beer/wine cooler patio table and made the middle of the table removable to add a buck underneath later. 

Note the 5 year old patio set, also an ana white project from back in the day!

Super quick build!

I did find that the measurements for customizing it for your cushion size seemed about 1.5 inches too big for all the depth pieces so I sized down but I haven't received my foam yet so maybe I'm wrong but Smth to think about. I didn't want my cushions to slide around so I took that into consideration when building. 

Estimated Cost
60$ CAD for the high density foam for each sofa (3x24x72) plus throw cushions for the back.

11 2x4x10 - cost varies depending on cedar or PT
Fence boards were reused

Outdoor Fabric to cover the foam
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
None yet
Recommended Skill Level
Beginner

Modern Park Bench

Submitted by Ecorn on Fri, 06/28/2019 - 21:15

This is my second project using Ana's plan. Plans were easy to follow. 

Built from Plan(s)
Estimated Cost
$40 CDN
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
double boiled linseed oil on bench and milk cans. I lightly sanded the milk cans to keep the patina.
Recommended Skill Level
Beginner
Seasonal And Holiday

Modern outdoor chair and loveseat

Modified chair plans to build loveseat. Chairs took one day and loveseat took one day. 

Estimated Cost
Lumber is way more expensive where I live. The chairs were $85 in lumber for both and the love seat was $40 because I had some leftover from the chairs.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Red mahogany stain, then a coat of polyurethane
Recommended Skill Level
Beginner

Comments

jessicawhitlock

Wed, 07/15/2020 - 11:33

I love how you set the cushion down in the seat. What type of cushion did you use? Is it comfortable this way? This looks exactly what I am picturing in my head, but I worry the bar on your legs might be uncomfortable.

Farmhouse Storage Bed = Amazing

Submitted by hechoenwi on Tue, 11/19/2013 - 15:18

We bought our first home this year and I wanted a new bed frame for my new home. This plan was perfect for our narrow bedroom in our small 100+ year old home. It fits right in with the character of the home and provides a lot of needed extra storage. I did try to make the drawers but as the instructions state drawers are tricky for beginners! So for now I will leave the drawers off. This bed is very sturdy. No one can believe I made it all by myself!

Estimated Cost
$200
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Behr Ultra Swiss Coffee with antiqued edges
Recommended Skill Level
Beginner

Comments

Rustic Farm House Table

Submitted by Scotto on Mon, 09/30/2019 - 22:00

First Crack at any wood work since high school. All timber used was reclaimed hard wood, hours of

planing,sanding and clamping (its heavy). A few mistakes but that's learning.

Estimated Cost
$300 Australian
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Estapol - Tung oil
Recommended Skill Level
Intermediate

Modern Cedar Outdoor Storage Bench

Submitted by Anonymous (not verified) on Tue, 05/30/2023 - 16:39

I had built two outdoor chairs with love seat (modified from the sofa plans) with 2x4s. The cushion seats were 24" x 24". Where to store them? I modified the Modern Cedar Outdoor Storage Bench plans to make the box wider, higher, longer to accommodate the cushions. With five boards comprising the top, it's a bit wider than the box so I didn't need to carve in an opening.

Comments

4 sided picnic table

Submitted by Anonymous (not verified) on Fri, 06/16/2023 - 13:59

4 sides for the whole family to sit.

Built from Plan(s)

Comments

Seasonal And Holiday

Farmhouse King Bed - knotty alder and grey stain

This was my first building project! I had so much fun with it ... for a guy that can't even hang a photo on the wall! My dad helped and he had all the tools. I spent a few weekends with him so not only was a good father/son project we had something to show off at the end. I think I've caught the woodworking fever.

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
prestain, weathered oak stain, danish oil finish
Recommended Skill Level
Intermediate

Comments

dentalba

Mon, 12/23/2013 - 12:10

I really like the look of the stain. I would be interested to know what changes you made to the original to achieve this look. Also, where did you find the lumber? I can't find knotty alder around here.

locke1103

Thu, 10/23/2014 - 06:32

Is there a way to find the materials needed and specific instructions on how to make this bed? I LOVE IT!

winnsamuel

Tue, 11/25/2014 - 19:22

Hello,

This is awesome, I've been looking to build a bed frame for my new apartment.  Does anyone know where I can find the plans for this project.

Similar to the person above me, I am new to this and not quite sure what to do.  If anyone can provide me with a little insight to this project I would really appreciate it!

 

Thanks!

Rustic X console table Tv Stand

Submitted by Anonymous (not verified) on Tue, 03/01/2016 - 18:21

I built this for my mom after finding plans online. Since then I have been inspired by Ana and Jacob to build all furniture I ever need from this point on. No more over priced cheap store bought furniture. Thanks Ana and Family for your plans and helping me find peace in the workshop.

Built from Plan(s)
Estimated Cost
$75 with stain and screws.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Golden Pecan from min wax and two coats of poly.
Recommended Skill Level
Beginner

Easy Upholstered bench

Wonderful project! Very fun. Built a bench from scrap 2x4s (left in the garage by our home's previous owner, so they were free!) and a piece of MDF shelving. Perfect for our entryway. The bench itself was incredibly easy to build. The hard part, in my opinion, was finishing it. So many pretty things to choose from! I used a piece of 2-inch foam plus a double layer of batting for the top, some striped upholstery fabric, and 160 nailheads to finish it off. Love it.

Built from Plan(s)
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Minwax stain in cognac, and then two coats of minwax poly.
Recommended Skill Level
Beginner

Comments

Guest (not verified)

Sun, 02/19/2012 - 12:54

Love it! Wondering if I could build it and have some type of slipcover on it. (house with three kids under 5 years old does not go well with permanent upholstery! haha)

Guest (not verified)

Fri, 03/09/2012 - 09:06

If you check out Ana's original plans for the Easiest Upholstered Bench, you'll see that she DID use slipcovers! You could make different ones for each season, or for holidays like Christmas or birthdays...

ehahn1

Wed, 10/30/2013 - 08:36

Hi Katie, I am having a difficult time finding fabric (hard to believe)! did you get yours online? How wide are the stripes? most fabric I am finding is not wide enough to cover the top and sides. Thanks for the help! Great build!

Toy Storage

Submitted by bridge318 on Mon, 12/30/2013 - 14:17

Half of the spare bedroom in our basement is our toy room and I wanted to be able to host visitors without them being overwhelmed by our toys. The units on top are three separate units. We didn't divide the middle unit so we could use as book shelves. The open units on the bottom are tall enough for car elevators, etc. I like the half units on top for the plastic storage boxes where I have craft/art supplies (I don't want my kids getting that when I'm not in the room!). We used white paneling on the back of the shelving. We used a piece of trim on the bottom to cover up the legs, but I wanted to show you that the entire unit does not sit on the carpet. The totes are Martha Stewart brand from Home Depot. (I apologize for the blurriness of the last photo.)

Estimated Cost
$350
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Kilz Primer (1 coat) and High-Gloss White paint (2 coats)
We waited to paint until it was all put together, but if I could do it over again, I would paint the boards before assembling and touch up what was needed. I sanded in between each coat.
Recommended Skill Level
Beginner

Modern Adirondack chair

Submitted by Anonymous (not verified) on Tue, 10/29/2019 - 12:43

Finally built my daughter a chair and she loves it

Built from Plan(s)
Estimated Cost
40.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Patio sitting area
Recommended Skill Level
Beginner
Seasonal And Holiday

Recycled pallet crates

Submitted by tull0032 on Sat, 03/17/2012 - 07:18

I had some left over pallets from another project I was doing and decided to make some recycled wood planter boxes to liven up our decking area. The whole project only took a few hours to make both boxes and used entirely reclaimed pallet wood aside from the two end pieces.

Estimated Cost
$3
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Sanded back pallet wood
Recommended Skill Level
Starter Project

Comments

Corner Cabinet

Submitted by Chuck1522 on Mon, 01/13/2014 - 10:32

This was a corner cabinet I made. The purpose of this cabinet is to be used as a pantry. My kitchen is quite small, and in turn I was always having to sacrifice cabinet space for pantry items. Total man hours was about 20 give or take the occasional trip to HD or Lowes.

I found this project quite enjoyable. I don't have much of a workshop area so space was tight. I had to constantly move my tools around to make room for the cabinet while I built it.

The plans supplied by this website were simple and straight-forward. I didn't need any specialty tools or have to use any weird joinery. All in all I would give this project an 8 out of 10. There were a couple of areas I feel I can improve on.

After having posted this picture on several social media sites my friends took notice, Now I'm getting all kinds of requests. Not sure if I will entertain any. It's just nice to see a vision come to life.

Thanks for the taking a gander at my work.

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Following the instruction on the bottle. I first applied three coats of wipe-on Teak Oil finish (Found at your local HD or big box retailer). Sanding with 220 between each coat. After all those coats were dry, about 72 hours, I applied two coats of wipe-on Polyurethane (again, found at your local HD). Before applying the last coat of wipe-on Poly I lightly rubbed the surface down with 0000 steel wool. This rubbing was done again after the last coat of wipe-on Poly was applied. I really feel this set the piece off and made it that much better. Be advised...I also used a tack cloth to remove any dust and debris between each coat of finish applied.
Recommended Skill Level
Intermediate

Comments

Jake

Mon, 01/13/2014 - 15:50

I also built a corner cabinet from the same plans and yours is by far the best. You obviously have the patience it takes to get the best out of your project. Looking for more from you.

Ill Just Paint It

Tue, 04/08/2014 - 18:33

Thank you so much for your vision! I've been looking for the perfect corner cabinet for at least a year! All the other plans within these plans are ok and would've worked, but I just felt like I wanted something more. I am in love with your doors! They look great! I may make mine a bit larger, but will most definitely add doors the same way you did. Unfortunately, it's not on the top of my priority list, but it will be this summer!!! Great work!

Rachel
www.illjustpaintit.com

balloongal247

Wed, 04/09/2014 - 06:30

This cabinet is beautiful! I love the natural wood look, and I too think the doors looks great.

Simplest Stool (as a water dispenser stand)

I needed a quick project that could easily be modified for my height needs and would make a good temporary base for my new water dispenser. This was perfect!

Built from Plan(s)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Slightly distressed (quick raw umber acrylic undercoat), finished with Benjamin Moore Natura paint (leftover 'perennial' color from a few years back) and gently sanded on edges/corners to allow the deeper color to show through.
Recommended Skill Level
Beginner

Dining Table

Submitted by wgbeecher on Fri, 01/24/2020 - 08:59

 Made this for my Son and His Wife.  They love it.

Built from Plan(s)
Estimated Cost
250.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Gray and PolyWipe Sealer
Recommended Skill Level
Intermediate