TV stand/ Console
Someone had asked me to build them a tv stand and this is what I did. Thank you for making the plans so clear.
Someone had asked me to build them a tv stand and this is what I did. Thank you for making the plans so clear.
Made this unit in 6 sections
(2) End Units = 15" x 14.25" x 83"
(2) Middle Units = 27" x 14.25" x 68"
(1) Middle Unit = 15" x 14.25" x 68
(1) Top Unit = 69" x 14.25" x 15"
Total for the whole unit = 99" x 14.25" x 83"
I used my Kreg jig (K4) for pretty much the whole project. Made all the shelves adjustable also using the Kreg Shelf Pin Jig. Glad I purchased the pin jig because it made the whole project go easier.
What I did different be from the plans shown:
1. The shelves: I used the 1x12 and did add the 1x2 but just made the front go down instead of out to give it a bulkier look.
2. The top: I basically mirrored the bottom shelf that way it would be a flush look.
Thanks for the plans! Modified the scale, really happy with the results.
Using the Michaela Island plans, I modified them for this croquet-inspired island, complete with black iron foot rail, sewing spindle drawer-pulls, and iron-supported cantilevered top. The extra boards making up the overhang are also supported by a trio of 1/2-inch dowels drilled through several of the planks.
The top was stained using several colors, with sanding in-between, and finished with paste wax.
The bottom shelf is supported, albeit not visibly, using a croquet mallet head.
Thu, 12/30/2021 - 16:46
How did you make the countertop since it hangs over the edge?
I needed a nice way to hide our TV electronics and at the same time serve as a bench for seating. I could not find plans for ANYTHING like this anywhere! I decided to take the Rustic X Console table plans and change the dimmensions around and it worked fantastic. I can now hide everything I need to in the baskets with the wiring exiting through the basket handholes and at the same time I do not have a useless media cabinet taking up space, but instead have additional seating in our living room for 3 more people!
This was my first furniture project, and I modified these plans slightly to get 2 drawers, as well as a smaller depth of the desk. I took this photo before I added drawer pulls, but I love how it turned out!
I used Anna's plan as a guide nut put my own spin on it. All mitered corners and added Coyote shilloute's. This for our southwest home.
Tue, 12/08/2020 - 11:31
Love your one of a kind table! Thank you for sharing your work:)
This table filled two needs at once for us: we needed a dumbbell or free-weight rack ($50 and up retail), and we needed some kind of desk-like surface for our home gym area that could withstand us two jump-roping fiends (um, maybe that's just my husband). Basically, it needed to be able to hold a lot (a Lot) of heavy metal stuff and take a beating while NOT Falling Over. The trestle desk was my biggest inspiration, and I guess I just stole the metal stretcher idea from that Pottery Barn dining table. It doesn't even really seem to need the metal stretcher, though...this table is beyond-my-wildest-dreams sturdy, even though it is standard counter height. The metal bar was about $17, so that's a big savings, if you leave it out. You MUST use a compound miter saw for this project. OR...you must be flexible about working with irregular cuts and joints. Also, I'm not sure I'd attempt butt-jointed 2x4's without pocket holes (or biscuit joints, I guess?), but that might just be me. I think this project could have taken only a single day if I hadn't screwed up just about every step of the way. I'm not the only one, right? You can read about a lot of those lovely embarrassments on my blog :) If you'd like the SketchUp model, it is available in the 3D Warehouse as "Dumbbell Table".
Pretty easy project. Check for square often. It will pay off when putting the shelves in. The "x" on the sides was the trickiest. Cost was approximately $100.
Mon, 11/24/2014 - 10:39
I plan on building this console table for my Daughter in the next week or so. Love Ana & her website, she has me hooked on building things with wood.
I made the top removable by attaching blocks to the inside corners of the apron and using a spade bit to drill a hole. Then attached hanger bolts to the table top and fastened with washers and wingnuts.
First atttempt at distressed farmhouse end table.
My table is without the X's because I was having some trouble with the angles. I am just starting out, so I think it turned out pretty well!
Treated myself to a load of new electrical tools and bought a kreg jig, this was my first project of this size for many years and also using the pocket hole method, my wife was very happy with the end result as was I. The doors, all made from scratch using the jig also finish the shrine off well. I'll be hunting around on the site for a new project soon, this one took me a lot longer to complete than I anticipated, it ook months before I finally managed to finish if off but then I had an issue with the amount of time available I could spend on it on a weekly basis.
This was based of Ana’s barn door bookcase and was exactly what my mom needed to hide her grandkid’s toys while she’s not watching them. Thanks for the idea!
I made this for my sons pirate party. It has an entrace under the plank to the pirateships "basement"
This is my first project. With some help from my husband (navigating the power tools-- the table saw in particular) it was completed in a few weeks. We live in Army housing, so I never really know what kind of space we will get. Inevitably, there is never enough storage, so this will find a home in any new home we might live in. I used beadboard for the back, stained minwax special walnut. The paint is Benjamin Moore serenity blue- and then I used acrylic polyurethane- adding another level of kid resistance;) Great plans Ana, and I am so excited to do my next project!
Thu, 12/04/2014 - 22:01
What a great job! I love the blue and the brown together! Thanks for sharing!
First time trying one of the plans from here. Absolutely loved the desk when the wife and I seen it. And shopping around for a desk we liked was way out of the prices we were looking for. Instead of using the pine boards and pocket holing them together. I purchased a top the exact size the boards would have made. The top is made of poplar. Sanded and stained. Waiting on the epoxy to arrive to apply to the top for a harder top to work on. Pine and poplar are soft woods and if writing on them it would groove the wood.
Thank you so much for the beautiful plans.
Hello, I'm doing furniture with wooden pallets and I found your awesome website with nice explanations and plans so I decided to make this nice farmhouse table but with wood from shipment wooden pallets.
Thank you very much for all your work and plans !
I will make other furnitures from your plans with wooden pallets :D and post the brags here soon.
We made this in just over 2.5 hours with the kids "helping." We made it a bit taller, with the seat at 19 inches, so the leg pieces were 25.25 inches instead of 18.25. Because of this, we will probably add two supports across each side as it seems a bit wobbly when the kids all wiggle on it. Now we finally have a seat where all 3 kids can sit together to play on the computer. Thanks for the plans!
I used the Rekourt plans for the most part, but I did change it a bit. I needed a smaller table, so I adjusted the plans to accommodate this. The table is 5 feet long with matching benches that are 4 feet. I eliminated the 2nd cut on the 2x4s used to construct the table base to simplify the look. I also made custom benches to match, as I could not find any plans that were an exact match on the site. This is the first time I've built anything, and it took some trial and error and a lot of muscle. It was well worth it though!